National Technical University of Athens (NTUA)
Διερεύνηση ανάπτυξης ικριωμάτων υδρογέλης μέσω τριδιάστατης εκτύπωσης και μεθοδολογιών βελτιστοποίησης των ενδιάμεσων σταδίων λαμβάνοντας υπόψη τις αρχές ακεραιτότητας στην έρευνα
Abstract
dc:descriptionDirect Ink Writing (DIW), extensively utilized for developing robust 3D scaffolds crucial for the growth of targeted tissues, has gained prominence in biomedical applications. The creation of 3D structures involves four interconnected stages—material development, the printing process, post-printing treatment and cell seeding—each influenced by numerous factors, making the overall optimization challenging. This hypothesis is confirmed by the limited repeatability and reproducibility of the results of scaffold development via Direct Ink Writing. These issues stem from the fragmented nature of research efforts, the absence of integrated methodologies in experimental design, and the lack of standardization in terms, methods, and procedures. Additionally, the analysis revealed that several non-technical factors related to Research Integrity significantly contribute to the low reproducibility and reliability of results. The subject of this thesis is to optimize the development of three-dimensional alginate/gelatin hydrogel scaffolds using the Direct Ink Writing method. The intended application is in soft tissue engineering, focusing on achieving guided vascularization. This research systematically investigates all relevant parameters, including rheological properties, printing techniques, and processing conditions. The goal is to address the fundamental issue of low reproducibility in Translational Research, which stems from both technological limitations and Research Integrity issues. Initially, Principal Component Analysis (PCA) and K-means Clustering were employed to identify material properties with statistically significant correlations to printing efficiency. Subsequently, two Taguchi Design of Experiments (Taguchi DoE) were conducted to determine the optimal values for both primary and secondary printing settings to achieve precise printing accuracy. The findings from PCA were validated by K-means clustering, revealing that viscosity, m, G’, G’’ and yield stress are critical determinants of the material’s printing behavior. The application of Taguchi DoE resulted in a 92% strand printability and 85% pore area printability. The optimal printing settings for the configuration of the REGEMAT 3D printer were defined as follows: ink viscosity [1000-4000]Pas, n_index<1, m [1000-3000]Pasn, G’ [1500-4500]Pa, G’’[700-1500]Pa, yield stress [2000-5000]Pa (alginate ratio - 8%), print head temperature - 24°C, extrusion speed - 2mm/s, nozzle diameter – 0,41mm, layer height – 0,58 mm, perimeter speed - 3mm/s, infill speed - 2mm/s, retraction speed - 30mm/s, and travel speed - 50mm/s. For post-printing treatment, a high co-optimization (with a desirability score of 0,964) of two conflicting scaffold properties—degradation time (19,6days) and swelling rate (50%)—was achieved, approaching the target values of 21 days and 50%, respectively. The optimal post-printing conditions were determined as an alginate ratio of 8%, immersion time of 15min, cross-linker concentration of 0,284M, DMEM as the incubation medium, and UV exposure included. Finally, the thesis highlights the occurrence of Ethical Integrity Issues in the filed, often expressed through inconsistent or poorly justified results. Aiming to mitigate ethical concerns, a set of comprehensive guidelines for the standardization and handling of data and results is also suggested.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kaliampakou, Christina
- Καλιαμπάκου, Χριστίνα
Subjects
dc:subject × 25- Άμεση Γραφή Μελάνης
- Τριδιάστατη Εκτύπωση
- Εξώθηση υλικού
- Ικρίωμα
- Βιοϋλικά
- Υδρογέλη
- Αλγινικό
- Ζελατίνη
- Σχεδιασμός πειραμάτων
- Ακεραιότητα της Έρευνας
- Direct Ink Writing
- 3d printing
- Biomaterials
- Hydrogels
- Scaffolds
- Alginate
- Gelatine
- Research Integrity
- Design of experiment
- Material extrusion
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημική μηχανική
- Chemical Engineering
- Engineering and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58234