National Technical University of Athens (NTUA)
Experimental study and thermodynamic modelling of mixtures containing third generation ionic liquids and deep eutectic solvents
Abstract
dc:descriptionThe objective of this thesis is the experimental study and thermodynamic modeling of mixtures containing third generation Ionic Liquids (ILs) and Deep eutectic solvents (DESs).In recent years, particular research focus has been placed on the extraction of bioactive compounds from natural raw materials, including phenolic compounds such as cinnamic acid derivatives (CADs) and tyrosol. Phenolic compounds are abundant in the plant kingdom and, thanks to their beneficial properties such as anticancer, anti-age, antivirus, anti-inflammatory, cardioprotective and generally antioxidant activity, constitute high added-value raw materials for food, pharmaceutical and cosmetics industries. In addition, the need for new sustainable and environmentally friendly processes and materials indicates the replacement of conventional volatile and toxic organic solvents (VOCs) by green solvents with high solubility activity. Such solvents include third generation ILs and DESs, which have attracted the scientific interest over the past twenty years due to their remarkable physicochemical properties and their potential green character. ILs are salts consisting of an inorganic or organic anion and an organic cation, which remain in liquid state at temperatures significantly below 100°C, or even at room temperature. DESs are composed of components capable of self-associating through hydrogen bonding interactions to form eutectic mixtures and are usually obtained by the complexation of a quaternary ammonium salt, which serves as the hydrogen bond acceptor (HBA), with a hydrogen bond donor (HBD). The characterization of third generation ILs and DESs as potentially green solvents is based on their biodegradable and non-toxic constituents. The first part of the present thesis focuses on the experimental study of key physicochemical properties of ILs and DESs, such as density and viscosity, along with an investigation of their dissolution capacity for four beneficial bioactive compounds. The examined solvents include two protic ILs, 2-hydroxyethylammonium formate (2HEAF) and 2-hydroxyethylammonium acetate (2HEAA), and five choline-chloride based DESs, choline chloride-urea (ChCl:urea (1:2)), choline chloride-1,2 butanediol (ChCl:1,2 butanediol (1:4)), choline chloride-1,4 butanediol (ChCl:1,4 butanediol (1:4)), choline chloride-acetic acid (ChCl:Acetic acid (1:2)) and choline chloride-formic acid (ChCl:Formic acid (1:2)). These solvents were chosen based on the nature of their constituents, their low cost and ease of synthesis. The bioactive compounds examined in this work are caffeic acid (CA), p-coumaric acid (p-CA), ferulic acid (FA) and tyrosol. Experimental density and viscosity measurements were conducted at the temperature range of 293.15 to 363.15 K and at atmospheric pressure for the pure solvents studied. 2HEAF was found to be the densest solvent, while the two structural isomers ChCl:1,4 butanediol (1:4) and ChCl:1,2 butanediol (1:4) presented the lowest density values. An empirical linear equation was applied to express the density’s temperature dependency. Considering viscosity, ChCl:Urea (1:2) was found to be the most viscous solvent due to the strong hydrogen bonds between urea and choline chloride, while ChCl:Formic Acid (1:2) is the least viscous DES, especially at low temperatures. The temperature dependency of viscosity was well described with the Vogel-Tammann-Fulcher (VFT) equation. Experimental density and viscosity values of the binary mixtures DES/water and DES/ethanol were also measured at DES concentrations of 50 – 95 % w/w and at two temperatures of industrial interest, 298.15 and 323.15 K. ChCl:Acetic Acid (1:2), ChCl:1,4 butanediol (1:4) and ChCl:1,2 butanediol (1:4) were used for the preparation of the binary mixtures. Regarding the densities of mixtures, most of them were found to decrease with an increase in mole fraction of water or ethanol, except for the aqueous mixtures containing DESs with a diol as HBD, which exhibit a maximum density in the DES rich phase as a function of the molar concentration of water. Furthermore, the addition of ethanol in DES has a greater impact on density reduction than that of adding water. As far as the viscosities of the mixtures are concerned, they were found to decrease rapidly with increasing temperature and upon mixing with ethanol or water. In this case, the addition of water affects more the viscosity, compared to the addition of ethanol. A modified Grunberg-Nissan equation was successfully used to model the composition dependence of viscosity. Experimental solubility measurements of CA, p-CA, FA and tyrosol in ILs and DESs were conducted in the temperature range of 293.15-323.15 K and are reported for the first time in the literature. For comparison reasons, solubility measurements of tyrosol in ethanol and water were also performed. ChCl:1,4 butanediol (1:4) and ChCl:1,2 butanediol (1:4) reveals the highest solvation capacity for CADs among the examined solvents, while p-CA was found to be less soluble than CA and FA in all solvents. In addition, tyrosol is more soluble than CA in the examined solvents. In general, the ILs and DESs studied in this work were found to be very good solvents for the dissolution of the examined bioactive compounds, while in the case of CA and FA, the DESs ChCl:1,4 butanediol (1:4) and ChCl:1,2 butanediol (1:4) are the most efficient solvents presented in the literature. Thermodynamic functions of solution were also determined using the Van’t Hoff equation, and the results suggest that the process is endothermic and nonspontaneous for all systems studied, while the entropy of solubilization is favorable for all systems. Effective separation and recovery methods require knowledge of the phase equilibrium of the mixtures involved. The lack of experimental data, as well as the difficulty and cost of performing experiments for measuring the phase equilibrium and other thermodynamic properties, especially in complex mixtures, emphasizes the need for highly accurate thermodynamic models. Over the past two decades, COSMO-based models such as COSMO-RS and its variant COSMO-SAC, combine molecular simulation quantum-chemical calculations and statistical thermodynamics for the prediction of thermodynamic properties of pure compounds and mixtures. With the advantage of using only a few global general input parameters, COSMO-based models have proven to be reliable tools to directly predict thermodynamic properties even in particularly complex mixtures, without requiring experimental data. The second part of the thesis presents the development of a new variant of the COSMO-SAC model, aiming to achieve reliable phase equilibrium predictions at both low and high pressures. Two major modifications of the previously published COSMO-SAC models are introduced. First, an improved combinatorial term is used to improve the results in nearly athermal and asymmetric mixtures. Second, a further separation of the hydrogen-bonding sigma profile has been introduced, differentiating the hydroxyl group belonging to water from hydroxyl groups belonging to other compounds, to improve the results in aqueous systems. The new model’s performance is evaluated for vapor-liquid equilibrium at low pressures and infinite dilution activity coefficient predictions, and it is benchmarked with respect to COSMO-SAC and COSMO-SAC 2010 models. Furthermore, the new model is combined with the Peng Robinson equation of state via the Universal Mixing Rules (UMR) and applied for high pressure vapor-liquid equilibrium predictions. The results indicate that the new model represents a reliable tool for phase-equilibria predictions for systems of various degrees of non-ideality and asymmetry. The last part of this work focuses on the thermodynamic modelling of experimental solubility data. First UNIQUAC and NRTL activity coefficient models were successfully used to correlate the experimental solubility data, showing comparable results. Afterwards, the new model was evaluated in solubility predictions using the metafile approach in the case of DESs and the electroneutral approach in the case of ILs. Prior to calculations, a conformational analysis was conducted for each solute, HBA, HBD, anion and cation, and the stable conformers were determined. Initial calculations with the lowest energy conformers exhibited notable errors. To improve the results, all the stable conformations of the solutes, choline-chloride and ethanolamine’s cation were tested in solubility predictions. The overall and the per system results were remarkably improved with some tested conformers, which were subsequently adopted instead of the minimum energy conformers in solubility predictions with the new model. The performance of the new model was then compared to that of COSMO-SAC and COSMO-SAC 2010 models, providing the most accurate solubility predictions. Considering the solvent screening, the predicted ranking of the new model did not fully align with the experimental data, but it was found able to correctly predict the ranking of DESs.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Prinos, Nikolaos
- Πρίνος, Νικόλαος
Subjects
dc:subject × 15- Βαθείς ευτηκτικοί διαλύτες
- Ιοντικά υγρά
- Διαλυτότητα
- Ισορροπία φάσεων
- Συντελεστές ενεργότητας
- Deep eutectic solvents
- Ionic liquids
- Solubility
- Phase equilibria
- Activity coefficients
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημική μηχανική
- Chemical Engineering
- Engineering and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58253