University of Patras
Ανάπτυξη, αξιολόγηση ροφητικών και καταλυτικών υλικών από εξανθράκωμα πυρολυμένων ελαστικών για την απομάκρυνση ρύπων από την υδατική φάση
Abstract
dc:descriptionWorldwide, rapid industrial and agricultural activity, population growth combined with the improved living standards, have resulted in the inexhaustible use of natural resources and water resources for the generation of products, leading to a general deterioration of water resources. One of the most important environmental pollution problems is the final disposal of used tires as the needs and the modern way of life results in a large volume of used tires, which is constantly increasing. Used tires can be used as a feedstock for material, energy recovery as well as the production of new materials, such as adsorbents, catalysts for the removal of organic and inorganic contaminants from aqueous solutions. Pyrolysis, an environmentally friendly treatment of waste tires with energy optimization, involves the thermal decomposition of waste tires at high temperatures (450–900oC) under oxygen-free atmosphere, transforming them into useful products such as oil- and gas-fractions, plus the carbonized solid residue, the Pyrolytic Tire Char. In recent decades, environmental science and technologies have been devoted to improve conventional water and wastewater treatment methods and develope new and effective purification methods for the treatment of wastewaters. Among conventional methods which include adsorption, flocculation, biological treatment, adsorption has proved to be an effective widely used wastewater purication technique for the removal of organic/inorganic and toxic pollutants at industrial scale. On the other hand, Advanced Oxidation Process (AOPs) based on in situ generation of highly reactive radical species, mainly HO• are being studied as alternative and rapidly developing technologies to the conventional water and wastewater treatment methods. Among AOPs, heterogeneous photocatalysis using semiconductor solids appears as an emerging destructive technology, being the focus of numerous investigations in recent years. Based on the above, in the present thesis, pyrolytic char from tire-rubber as low-cost adsorbents as well as char-TiO2 composite catalysts as photocatalysts for the removal of pollutants were prepared and characterized with different techniques. Phenol, methylene blue dye (MB) and hexavalent chromium (Cr (VI)) were selected as target compounds based on the internationally available literature for their presence in water and wastewater, their harmful effects on the aquatic life as well as on human beings and the effective applications of the Advanced Oxidation Processes (AOPs) for their removal from aqueous solutions. Pyrolytic tire char adsorbent materials (PC, Char500, AC) and the nanocomposite materials were successfully prepared by a sol–gel impregnation method followed by an extensive purification treatment with refluxed nitric acid and a calcination step. To determine the textural and physicochemical properties of the above adsorbents and composite catalysts, techniques such as X-ray diffraction (XRD), N2 porosimetry, scanning electron microscopy (SEM), electron paramagnetic resonance (EPR) spectra, ultraviolet–visible diffuse reflectance spectra (UV–vis DRS), FT-IR spectroscopy, Boehm titration, elemental analysis (C, H, N, O, S) and point of zero charge (pHpzc) were used. Sol–gel method has been successfully used to prepare PC/TiO2 nanocomposites catalysts. XRD showed anatase TiO2 crystal phase for all composite catalysts. Also, traces of brookite crystal phase, with orthorhombic Pcba space group, was formed in both TiO2blank and CT 1/2 as well as in CTN (CTN 0.2/2, CTN 0.5/2) and AC/TiO2 (ACT 0.2/2, ACT 0.5/2) composite catalysts. To explain the kinetics of the adsorption processes, four kinetic models including the pseudo-rst-order, the pseudosecond-order, intraparticle diffusion and Elovich models have been applied to t the experimental data. A series of error analysis methods (SSE, SAE, ARE and Chi-squared) have been applied to determine which kinetic model presented the besttting to the experimental results. In all cases, the kinetic experimental data were bettertted by the pseudo-second order model than the other three models, as evidenced from the R2 coefcients and the lower values all the calculated error functions, indicating that the adsorption process is controlled probably by chemisorption. The experimental data were fitted with the Langmuir, Freundlich, Dubinin - Redushkevich (D-R), Temkin and Frumkin adsorption isotherms for adsorption of selective pollutants on adsorbents and pyrolytic tire char- TiO2 composite catalysts. The Langmuir model provided the best fitting of adsorption data for phenol on PC, Char500,AC and on composite catalysts PC/TiO2, CTN, CTNF, ACT, as well as,Cr (VI) at different initial pH values ranging between 4 and 10 on PC and Char500 adsorbents. This indicates that adsorption occurs mainly on the active sites of the pyrolytic tire char. The Freundlich model provided the best fitting of adsorption data for ΜΒ dye on Char500, PC and Cr (VI) on activated char AC. In order to understand the nature of adsorption, the three thermodynamic parameters Gibbs free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) during the adsorption of phenol and MB on PC, Char500 and Cr (VI) on PC and AC were calculated. The negative value of Gibbs energy (ΔG <0) indicate that the adsorption process was thermodynamically feasible and spontaneous at all temperatures studied. The adsorption of phenol on PC and Char500 showed a negative enthalpy value (ΔH <0) indicating that the process is exothermic and the negative value of entropy indicates the decrease of randomness at the solid solute interface during the adsorption process. On the contrary, for MB adsorption on PC and Char500, the positive value of enthalpy conrmed the endothermic character of adsorption process while the positive value of entropy revealed the increase of randomness during the adsorption process. ΔH, ΔS, and ΔG are all negative during the adsorption process of Cr(VI) on PC and AC which was driven by physisorption processes. The adsorption of methylene blue (MB) dye from aqueous solutions using acid-treated pyrolytic tire char (CHTR) in a fixed-bed adsorption column was studied. The effects of dye concentration and feed flow rate was also studied. Breakthrough curves and characteristic parameters of the column were determined and modeled according to Adams–Bohart, Yoon–Nelson and Thomas models. The Thomas and Yoon–Nelson model predictions were in very good agreement with the experimental results for all the process parameters studied, as indicated by the high values of correlation coefficient R2 and the low ARE values. For the fixed 15 cm of adsorbent-bed height employed, the adsorbent exhibited the maximum bed capacity of 3.85 mg g–1 at a flow rate of 100 mL min–1 and initial MB concentration of 40 mg L–1. Breakthrough time and the efficiency of adsorption column decreased as the adsorption cycles increased and especially after the second cycle.The photocatalytic activity and the promoting effect of PC/TiO2 composite catalysts were investigated for the degradation of phenol and MB dye in aqueous suspensions. In all cases, the photocatalytic degradation followed pseudo-first order kinetics. The apparent first-order rate constant (kapp) for photocatalytic degradation of phenol increased from 6.3 × 10−3min−1to × 2.8 10−3min−1for PC/TiO2 0.2/2–1.0/2. The net photocatalytic removal of phenol during the degradation process by CT 1/2, CT 0.7/2, CT 0.5/2, CT 0.2/2, CT 0.1/2 and TiO2blank was 75%, 76%, 90%, 99%, and 65%, respectively. It is clearly demonstrated that the ratio of pyrolytic char to PC largely affected the performance of the composite catalysts. CT0.2/2 catalyst showed the highest photocatalytic degradation. It was also found that the adsorption capacity after three catalytic cycles remains almost constant. The apparent first-order rate constant (kapp) for photocatalytic degradation of MB increased from 1.5× 10−3min−1to 1.9 × 10−3 min−1 for PC/TiO2 1.0/2–0.2/2. An important finding is a significant promoting effect of PC on the photocatalytic performance of TiO2. Electron paramagnetic resonance (EPR) spectroscopy showed that the enhancement of photocatalytic activity of TiO2 might be attributed to the a) the generation of positive holes in TiO2 and consequently the production of OH• radicals are improved in the presence of pyrolytic char because of the electron transfer from the conduction band of TiO2 particles to the graphitic structure of pyrolytic char which reduce the recombination of electrons–holes in TiO2 b) increased adsorption of phenol on the surface of pyrolytic char which can be easily transferred to the surface of TiO2. The photocatalytic evaluation of CTN, CTNF, AC/TiO2 composite catalysts towards phenol degradation in aqueous solutions was studied. The removal of phenol during photocatalytic process by 70%, 40%, 22%, 15%, 18%, 12%, and 5 % for CTNF0.2 / 2, CTNF 0.5 / 2, ACT 0.2/2, CTΝ 0.2 / 2, ACT 0.5/2, CTN 0.5 / 2 and TiO2blank, after 240 min of simulated solar light irradiation, respectively. Among the tested catalysts, CTNF catalysts showed the highest photocatalytic degradation. The removal of phenol during photocatalytic process by 60%, 54%, 17 %, 15%,16%, 10% and 0.5 % for CTNF0.2 / 2, CTNF 0.5 / 2, CTΝ 0.2 / 2, CTN 0.5 / 2, ACT 0.2/2, ACT 0.5/2 and TiO2 after 640 min of visible light irradiation, respectively. Finally, the photocatalytic regeneration of Char / NF-TiO2 adsorbents was studied due to their high content of pyrolytic char for the adsorption of phenol in aqueous solutions. The regeneration efficiency for CTNF 2.0/ 0.5 catalyst was the highest compared to the other composite catalysts. There was a significant reduction in regeneration efficiency after the second cycle, achieving 114.9% to 30% for the first to fourth cycle within 12 hours of solar irradiation, respectively.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2017
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Makrigianni, Vasiliki
- Μακρυγιάννη, Βασιλική
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58268