University of Western Macedonia
Development and evaluation of novel dual-function materials for the integrated capture and conversion of CO2 towards synthetic natural gas
Abstract
dc:descriptionThis thesis concerns the development (i.e., synthesis), characterization, and evaluation of new/ novel catalyst, adsorbent, and dual-function materials for the three related processes of catalytic CO2 methanation, CO2 capture at intermediate temperatures, and the integrated CO2 capture and methanation of CO2. The ultimate goal is the capture and conversion of CO2 to synthetic natural gas (CH4), which can address both problems of rampant CO2 emissions, via capturing and converting CO2 emitted from industrial flue gases into value-added synthetic natural gas fuel, as well as the problem of excess renewable energy storage, which can take place in the form of an energy dense and reliable energy carrier (i.e., methane) through the Power-to-Gas concept. The operation in a combined integrated CO2 capture and utilization via methanation (ICCU Methanation) process through the use of dual-function materials (DFMs) can minimize the necessary processing steps and improve energy efficiency. Initially, the catalytic performance of benchmark Ni/CeO2 CO2 methanation catalysts was enhanced via the doping of the CeO2 support with Pr, with a varying content. It was found that Pr doping up to 10 mol% could act to optimize specific physicochemical properties of the catalyst, including the oxygen vacancy population, surface basicity, and Ni dispersion, which yielded a high CO2 methanation catalytic activity with a low activation energy value. Afterwards, the effect of the synthesis method of the Pr-doped CeO2 support (Ce0.9Pr0.1O2-δ) was investigated, showing that the modified Pechini synthesis method using ethylene glycol and citric acid in the absence of H2O could increase the support porosity/ pore volume, allow for the dispersion of small and medium-sized Ni nanoparticles, and further enhance the oxygen vacancy population and surface basicity, while keeping a high reducibility. These properties manifested themselves in an improved CO2 methanation catalytic activity for the catalyst prepared via this method. Then, the best performing monometallic 10% Ni/Ce0.9Pr0.1O2-δ (Ni/Pr-CeO2) catalyst, with the support prepared via modified Pechini, was further modified with low loadings of noble metals (1% Ru, Pt, Rh, Pd, and Ir). Ru was the only noble metal that could act as a promoter, by substantially enhancing the CO2 methanation catalytic activity, especially at lower temperatures (around 300 oC), in the bimetallic RuNi/Pr-CeO2 catalyst. Afterwards, a systematic study was performed regarding the optimization of the intermediate-temperature CO2 adsorption performance for different supported alkaline phases. The “Na2O” adsorption active phase supported on the Al2O3 metal oxide support was shown to be the most suitable, via the creation of a high population of Al-O-Na CO2-philic sites, and the optimal Na2O load was shown to be 12 wt%. The optimized 12% Na2O/Al2O3 (NaAl) material could function as a reversible solid oxide CO2 adsorbent during multi-cyclic adsorption-desorption experiments at 300 oC and 500 oC, respectively. Finally, the two separately optimized adsorbent (NaAl) and catalyst (Ni/Pr-CeO2 or RuNi/Pr-CeO2) materials were physically mixed together in order to prepare DFMs for the ICCU-Methanation process. The weight ratio between the catalyst and the adsorbent in the physical mixture, as well as the operation temperature, were optimized at 1:3 and 300 oC, respectively, to achieve a high CH4 yield combined with fast CH4 production kinetics. Both the mono- and bimetallic DFMs were stable during multi-cyclic CO2 adsorption-methanation operation at just 300 oC, with CO2 capture being performed under a simulated flue gas feed (co-presence of O2 and H2O). Moreover, an approach was also followed to optimize the benchmark Ru/Na2O/Al2O3 DFMs via the variation of the synthesis method and the active metal load. The Pechini sol-gel synthesis method for the support could enhance the porosity, surface basicity, and active metal dispersion in the final DFM, and lead to superior ICCU-Methanation performance. The optimized DFM was stable under CO2 capture from a simulated flue gas feed, with minor deactivation occurring mainly via surface area loss. In short, the current thesis presents novel results based on the systematic optimization of material synthesis and composition towards the combined process of CO2 capture and conversion to synthetic natural gas. It contributes and presents six independent and innovative research works, which have been published in prestigious, international, peer-reviewed journals, concerning: (a) the effect of the Pr-doping extent, synthesis method, and noble metal addition in Ni/CeO2 CO2 methanation catalysts, (b) the investigation of the CO2 adsorption performance for various alkaline adsorbent phases dispersed on Al2O3, and (c) the application of separately optimized adsorbent and catalyst material physical mixtures, as well as the optimization of benchmark Ru/Na2O/Al2O3 DFMs for the integrated capture and methanation of CO2. It is expected that this thesis will be of interest and potential use to other researchers working in the fields of material synthesis, characterization, and testing for CO2 methanation, intermediate temperature CO2 capture, and integrated CO2 capture and conversion.
Degree
thesis:*- Grantor dc:publisher
- University of Western Macedonia
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsiotsias, Anastasios
- Τσιότσιας, Αναστάσιος
Subjects
dc:subject × 32- Κατάλυση
- Μεθανοποίηση του CO2
- Προσρόφηση του CO2
- Δέσμευση και μετατροπή του CO2
- Συνδυασμένη δέσμευση και μεθανοποίηση του CO2
- Δι-λειτουργικά υλικά
- Διμεταλλικοί καταλύτες
- Σύνθεση υλικών
- Χαρακτηρισμός υλικών
- Σύνθεση sol-gel
- Catalysis
- CO2 methanation
- CO2 capture
- CO2 capture and utilization
- Integrated CO2 capture and methanation
- Dual-function materials
- Bimetallic catalysts
- Material synthesis
- Material characterization
- Sol-gel synthesis
- Χημεία
- Φυσικές Επιστήμες
- Εφαρμοσμένη χημεία
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Chemical Sciences
- Natural Sciences
- Applied Chemistry
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58280