National Technical University of Athens (NTUA)
Υπολογιστική μελέτη της χημείας της καύσης μεθανίου και αερίου σύνθεσης: επίδραση της προσθήκης ιχνοστοιχείων οξειδίων αζώτου και θείου, εφαρμογές σε ναυτικούς κινητήρες
Abstract
dc:descriptionThe present thesis investigates the effects of the addition of nitrogen oxides (NOx) and sulphur dioxides (SOx) trace species on the ignition and combustion of methane (CH4) and syngas (CO-H2), at conditions representative of marine engine operation. In particular, the thesis includes the computational study of the effect of NOx - SOx addition on methane ignition, on syngas and methane combustion in Perfectly Stirred Reactor conditions, and on methane preximed laminar flame, the development and optimization of a skeletal chemical kinetic mechanism for methane combustion, its extension with NOx-SOx submechanisms and reactions associated with the interactions of nitrogen (N) and sulphur (S), the assessment of the assembled optimized skeletal mechanism against experimental data for syngas and methane combustion, and finally the experimental validation of part of the present numerical results with first experiments in a compressed natural gas (CNG) Otto engine. Further, to undertake numerical studies in marine engines implementing enhanced chemical kinetic schemes for the effective description of chemistry and a deeper understanding of combustion, an integrated software tool was developed by coupling the KIVA-3vr2 Computational Fluid Dynamics (CFD) code with the CHEMKIN-II chemical kinetics code. The couped code enables the solution of the mass and energy conservation equations in every computational cell using enhanced chemical kinetic schemes, which results in a more accurate computation of source terms in the overall mass and energy conservation equations. The present study includes computational results for a two-stroke marine Diesel engine. In particular, the temporal evolution of combustion is characterized by means of the pressure and rate of heat release traces, as well as in terms of the spatial distribution of the hydroxyl radical (OH), methane (CH4) and formaldehyde (CH2O), at representative time instants. With reference to experimental data, the new results demonstrate a significant improvement regarding the rate of heat release evolution, in comparison to results based on the one step chemistry approach. The main motivation for the present research is the environmental protection from pollutant emissions generated by the marine industry. In this context, the International Maritime Organization (IMO) and state authorities have imposed regulations, which are stricter in specific areas (Emission Control Areas - ECAs). These regulations dictate the decrease of NOx and SOx emissions from marine engines. To this end, the study of combustion, of the interaction of NOx - SOx, as well as of their effect on ignition and combustion in conditions pertinent to marine engine operation, is essential for undestanding the associated engine thermochemistry, as well as for marine engine combustion and emissions control. Understanding the chemistry of pollutant production requires, among others, a comprehensive understanding of the largely interwined chemical pathways associated with marine engine combustion. In this context, an accurate prediction of NOx - SOx effect on marine engine combustion requires a hierarchical approach, starting from the study of combustion of low carbon fuels, in particular, syngas and methane. Further, it can be argued that, even in the case of higher carbon fuels (as surrogates of liquid marine fuels), the reactions of NOx and SOx with C1-C3 species are rate-determining steps. In the above context, the first step of the present thesis has been the development of a reliable detailed assembled chemical kinetic mechanism, which includes all essential elementary reactions necessary for a complete and accurate description of combustion. Here, the objective is to generate reliable results in a wide range of condtions of temperature, pressure and values of equivalence ratio, representative of the conditions of marine engine operation. To this end, four detailed chemical kinetic mechanisms were assembled, incorporating hydrocarbon, NOx and SOx chemistry, and their interaction; their performance is assessed against experimental data of ignition delay times in shock tubes and speciation data in Jet Stirred Reactors (JSRs). Based on the above procedure, the best performing assembled mechanism was selected. This mechanism consists of the detailed mechanism "AramcoMech 2.0" (2016), corresponding to the H/C part, the NOx submechanism from the "CRECK C1-C3 high-temperature" mechanism including the enhancements made by Song et al. (2019), the SOx submechanism of Zhou et al. (2013), and finally the N-S interaction reactions from the work of Glarborg (2007). The assembled mechanism developed in the present study was used for quantifying the doping effects in the following cases: (a) CH4 ignition in conditions pertinent to marine engine operation, (b) syngas and methane combustion at PSR conditions, for conditions relevant for marine engines, and (c) CH4 premixed laminar flame in low and intermediate pressures (P=1 - 20.3 bar). The following conclusions have been drawn: •Irrespective of its added concentration, the effect of SO2 on ignition is insignificant for all conditions and mixture compositions considered. •At intermediate pressures (P=10 bar), the promoting effect of NOx is confirmed to deteriorate at increasing equivalence ratio. •The promoting effect of NO2 doping is more pronounced in comparison to NO doping at intermediate pressures. •At high pressures (P=90 bar), the promoting effect of NO doping is comparable to the corresponding NO2 doping effect; this is important in terms of implementing EGR in marine engines because ignition concerns high pressures, while the percentage of NO in NOx is higher than 90%. •For syngas and methane combustion at PSR conditions, no significant effect of NO-SO2 doping has been identified, for all conditions (P, T, φ) and doping concentations (100-1000 ppm) considered. •A distinct decelaration of syngas combustion has been observed for addition of 500 and 1000 ppm SO2 in stoichiometric and rich mixtures, at intermediate and high pressures (P=10 bar, 120 bar). •For poor syngas mixtures and intermediate pressures, the addition of NO or NO2 promotes combustion, in the entire temperature range considered (Τ=800-1200 Κ), while in high pressures the promoting effect is present for T>1050 K. •For stoichiometric and rich syngas mixtures, the effect of NO and NO2 addition switches between decelaration and acceleration as a function of temperature, for both intermediate and high pressure (P=10 bar, 120 bar). •For methane combustion at PSR conditions, a distinct decelaration of CH4 consumption is observed by the addition of 500 and 1000 ppm SO2, for all conditions (P, T, φ) considered. •The addition of NO or NO2 promotes CH4 consumption for T>900 K, for all pressures (P=10 bar, 120 bar), stoichiometries (φ=0.5-2.0), and initial concentrations of NO, NO2 and NO-SO2 (100-1000 ppm) considered. •For PSR combustion, the addition of NO2 has a stronger acceleration effect in comparison to NO addition, for rich methane mixtures and initial doping concentrations of 500 and 1000 ppm, both for intermediate and high pressures. •No significant effect on laminar flame speed has been observed from the adittion of ΝΟ, ΝΟ-SO2 to CH4 mixtures, at low and intermediate pressures (P=1 - 20.3 bar). Regarding the validation of the optimized assembled skeletal chemical kinetic mechanism in combustion applications of neat mixtures and mixtures doped with NOx-SOx, the following conclusions were drawn from studying: (a) combustion of CH4 and syngas at PSR conditions, and (b) CH4 premixed laminar flame: •Improved performance of the optimized assembled skeletal chemical kinetic mechanism, in comparison to the assembled detailed mechanism Mech. I, for combustion of poor syngas mixtures (φ=0.1) at PSR conditions. •Very good performance of the optimized assembled skeletal chemical kinetic mechanism for combustion of a different fuel (syngas) than the fuel used to develop the particular mechanism (CH4). •Very good performance of the optimized assembled skeletal chemical kinetic mechanism for combustion of poor CH4 mixtures (φ=0.5) at PSR conditions. •Improved performance of the optimized assembled skeletal chemical kinetic mechanism, in comparison to the assembled detailed mechanism Mech. I, for premixed laminar flame of CH4 mixtures at low pressures (P=1 atm). •Satisfactory performance of the optimized assembled skeletal chemical kinetic mechanism for premixed laminar flame of CH4 mixtures at intermidiate pressures (P=10 atm, 20 atm). •Smooth coupling of the optimized skeletal mechanism with the NOx-SOx submechanisms and the reactions of N-S interactions. The present study also includes the experimental validation of representative cases pertinent to the effects of NOx addition; here, the effect of NO addition has been considered. Experiments were performed in an Otto engine operating with compressed natural gas (CNG), which has methane as its main component. The present experiments demonstrated increased final concentrations of NO2, for initial concentrations of NO of 300 ppm and 1000 ppm, for low load operating conditions (25%) and poor mixtures (λ=1.4). This finding is significant for ignition delay times, as well as for combustion development, suggesting the increased OH production, in accordance with the computational results of the present work, as well as the one of Mathieu et al. (2015). The present thesis is structured in eleven chapters as follows. In Chapter 1 detailed information regarding pollutatnt emissions from the marine industry, the relevant regulatory framework imposed by the International Maritime Organisation (IMO), as well as the measures that marine industry will follow in the upcoming years, are discussed. In Chapter 2 the assessment of the four assembled detailed chemical kinetic mechanisms and the selection of the best performing one is presented. The study of the effect of NOx - SOx addition on methane ignition is analyzed in Chapter 3. In Chapter 4 the study of the effect of NOx - SOx addition in syngas and methane combustion at PSR conditions is presented. The study of the effect of NOx - SOx addition on premixed laminar flame speed of methane mixtures at low and intermediate pressures is presented in Chapter 5. In Chapter 6 the validation of the optimized assembled skeletal chemical kinetic mechanism is presented. In Chapter 7 computational results using the code developed by coupling the CFD code with the chemical kinetics code are presented; an n-heptane reduced chemical kinetic mechanism is used. Present experimental results in an Otto engine operating with compressed natural gas (CNG) and the corresponding conclusions regarding the effect of NO addition are discussed in Chapter 8. The novelty of the present work is discussed in Chapter 9. In Chapter 10, the main conclusions of the present study are summarized. Suggestions for future work are presented in Chapter 11. Finally, the list of references is presented.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kazangas, Dimitris
- Καζαγκάς, Δημήτρης
Subjects
dc:subject × 16- Χημική κινητική
- Υπολογιστική ρευστοδυναμική
- Άναλυση ρυθμού παραγωγής
- Καύση
- Σκελετικοί μηχανισμοί χημικής κινητικής
- Chemical kinetics
- Computational fluid dynamics
- Rate of production analysis
- Combustion
- Skeletal chemical kinetic mechanisms
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική, γενικά
- Other Engineering and Technologies
- Engineering and Technology
- Engineering, general
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58306