University of Western Macedonia
Study of the in situ electrogeneration of hydrogen peroxide for water and wasterwater treatment applications
Abstract
dc:descriptionIn the last century, industrialization led to increasingly reckless overconsumption of products, food, medicines, etc., creating a vicious cycle between human needs and the demand for products, which continually increases. This trend has led to the formation of new chemical compounds that are more toxic and persistent, eventually contaminating water bodies and damaging aquatic ecosystems. Municipal wastewater treatment plants are inadequate for treating these specific pollutants. Consequently, scientists have turned their attention to more effective methods, such as Advanced Oxidation Processes (AOPs). AOPs focus on producing strong, non-selective oxidants, such as •OH and SO₄²⁻, which can react with organic compounds and completely mineralize them, resulting in CO₂ and H₂O. Hydrogen peroxide (H₂O₂) is a strong oxidizing agent on its own and is also used as a reagent in various AOPs to generate •OH. This thesis investigates in situ hydrogen peroxide (H₂O₂) generation via a two-electron oxygen reduction reaction (ORR) in a commercial electrochemical cell with a filter press configuration. The study comprises three independent chapters focusing on the interfacial properties of the electrode material, fluid flow dynamics within the electrochemical reactor channel, and the application of H₂O₂ as a reagent in the e-Fenton reaction to generate •OH for degrading the drug sulfadoxine (SDX).Chapter 1 aims to elucidate the role of interfacial properties of carbonaceous cathodes in H₂O₂ electroproduction. In the theoretical part of this chapter, a critical review was conducted, analyzing the majority of experimental studies on H₂O₂ electrogeneration with carbonaceous electrodes from 2010 to 2022. These cathodes were classified into two main categories (i.e., crystalline and fibrous) and five subcategories based on their structure: reticulated vitreous carbon (RVC), graphite, carbon felt, graphite felt, and gas diffusion electrode (GDE). The interfacial properties, including hydrophilicity/hydrophobicity, O 1s/C 1s ratio, pore size, and specific surface area, were also investigated. First, the annual publications on this topic during the period were reviewed, highlighting each electrode category and the percentage of studies providing data on at least one of these properties. More than 100 publications were analyzed, revealing that fewer than 40% contained quantitative information on interfacial properties. The electrode categories are then briefly presented, and the performance of these materials is compared. GDEs emerged as the most efficient electrodes for H₂O₂ electrogeneration, with most studies focusing on modifying these electrodes to improve production. A comprehensive analysis of the specific properties and their influence on cathode performance was conducted, with attempts to correlate them with current efficiency (EC). In terms of hydrophilicity/hydrophobicity, a balanced level is required for optimal electrode performance. A high O 1s/C 1s ratio is preferred, as functional groups such as –COH, -C-O-C, -C=O, -COOH, and –CHO enhance the 2e⁻ ORR. Regarding pore size and surface area, mesoporous materials and those with a high BET surface area are considered most suitable for H₂O₂ electrogeneration. Finally, the durability of the cathodes is also investigated, alongside density functional theory (DFT) studies on the 2e⁻ ORR. Based on these studies, GDEs are identified as the most stable electrodesIn the experimental part of Chapter 1, H₂O₂ electrogeneration experiments were conducted in a commercially available electrochemical filter press reactor (MicroFlow, 0.001 m², ElectroCell, DK) using three different commercially available cathodic electrode materials with varying interfacial properties: activated carbon felt (ACF), non-activated carbon felt (NACF), and gas diffusion electrode (GDE). The purpose of this experimental part was to validate some conclusions drawn from the literature review. Initially, the electrodes were characterized in terms of interfacial properties, including hydrophilicity/hydrophobicity, pore size, and specific surface area. Experiments were then performed to optimize the operating parameters and determine the yield of H₂O₂ electrosynthesis. A maximum estimated yield of approximately 40% was achieved with the NACF electrode after 30 minutes of operation. Furthermore, the performance of the electrodes was investigated under two conditions: (i) with an O₂-saturated electrolyte and (ii) under continuous air supply, to examine differences in O₂ distribution within the electrode material based on its interfacial properties. The maximum H₂O₂ concentration for the first scenario was 3.86 mg/L after 60 minutes of operation, achieved with the NACF electrode. In contrast, under the second scenario, H₂O₂ generation was significantly increased for all three electrodes, with the GDE performing best, reaching 43.3 mg/L after 60 minutes of operation. In the first scenario, the more hydrophilic electrode performed better, as dissolved O₂ could penetrate the electrode body more effectively. Meanwhile, in the second scenario, the GDE was the most efficient, as a three-phase boundary (TPB) was formed, allowing for better distribution of gaseous O₂ within the electrode. In Chapter 2, fluid flow within the electrochemical reactor is investigated and qualitatively correlated with H₂O₂ electrogeneration results from experiments. First, the fluid path of the MicroFlow electrochemical reactor was accurately modeled using ANSYS Cruise 2022 R2 Design Modeler, and fluid velocity patterns were simulated in ANSYS Cruise 2022 R2 Fluent, both in an empty channel and with a spacer for four different inlet velocities. Simultaneously, experiments were conducted in the same electrochemical cell of the filter press under specific inlet velocities and continuous flow mode. The simulations revealed that introducing a spacer is crucial for H₂O₂ production at low inlet velocities, as production increased in the presence of the spacer. This behavior can be explained by the uniformity provided by the spacer, as it reduces dead zones near the cathode surface. In contrast, H₂O₂ production was not significantly affected at high inlet velocities. The simulations indicated that increasing inlet velocity generates vortices in the fluid path, allowing the electrolyte to adequately cover the electrode surface. However, the residence time for H₂O₂ production is insufficient at high inlet velocities, leading to lower system performance compared to low inlet velocities with a spacer present. Chapter 3 examines the degradation of SDX via the e-Fenton (EF) process in the MicroFlow cell. A gas diffusion electrode (GDE) was used as the cathode, and a dimensionally stable anode (DSA) with titanium was used as the anode. First, the effects of operating parameters namely, current density (J), recirculation flow (Fin), and pH under constant and continuous air supply on H₂O₂ electrogeneration were investigated. Subsequently, the effect of Fe²⁺ dosage on SDX oxidation and mineralization was assessed. The maximum H₂O₂ concentration achieved was 457 mg/L at 50 mA/cm², Fin = 200 mL/min, and pH = 7 after 2 hours of operation. Under the same conditions, SDX was completely degraded with the addition of 0.5 mM Fe²⁺ within the first 10 minutes of electrolysis, resulting in a total organic carbon (TOC) removal of 77.4% at the end of the 2-hour experimental period. The oxidation mechanism of SDX was further investigated using LC/HRMS Orbitrap, which identified a total of five transformation products (TPs), four of which were reported for the firsttime in international literature. The acute and chronic toxicity of these TPs was then evaluated in three species: fish, Daphnia, and green algae using ECOSAR software. Most TPs showed lower toxicity than SDX across nearly all categories, though some exhibited increased toxicity, suggesting that longer treatment times or more intensive conditions may be required. Finally, the stability of the cathode was investigated in terms of H₂O₂ electrogeneration and SDX degradation with 0.1 mM Fe²⁺ over 10 consecutive cycles of 2 hours each. SDX degradation remained stable, ranging from 72.2% to 85.4%. In contrast, H₂O₂ electrogeneration decreased progressively with each cycle, with the produced H₂O₂ reduced by almost 50% by the 10th cycle.
Degree
thesis:*- Grantor dc:publisher
- University of Western Macedonia
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Petsi, Panagiota
- Πέτση, Παναγιώτα
Subjects
dc:subject × 17- Ηλεκτροχημεία
- Αντιρύπανση, Προηγμένες οξειδωτικές μέθοδοι
- Υπεροξείδιο του υδρογόνου
- Σουλφαδοξίνη
- Μελέτη ρευστοδυναμικής
- Διεπιφανειακές ιδιότητες ανθρακικών ηλεκτροδίων
- Electrochemistry
- Advanced oxidation processes
- Hydrogen peroxide
- Sulfadoxine
- Computational fluid dynamics
- Interfacial properties of carbonaceous electrodes
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημική μηχανική
- Chemical Engineering
- Engineering and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58323