Back to search

Aristotle University Of Thessaloniki (AUTH)

Theoretical and experimental investigation of the optoacoustic phenomenon in black carbon particles aiming to design a low-cost sensor

Abstract

dc:description

The thesis explores the processes surrounding the formation, properties, and detection of Black Carbon (BC), with an emphasis on improving its measurement using innovative technologies. BC refers to carbonaceous particles formed during the incomplete combustion or pyrolysis of hydrocarbons. Its creation is affected by parameters such as flame temperature and the fuel type (especially for diffusion flames). BC plays a significant role in both climate dynamics and public health. The work investigates the underlying physics of BC particles with an emphasis on absorption, evaluates the limitations of current detection methods, and proposes advancements to address these gaps. The optical properties of BC are significant mainly due to their contribution to climate change. Its ability to uniformly absorb light across the visible and near-infrared spectrum distinguishes it from other particulate pollutants, which generally have a cooling effect on the climate due to light scattering. Its optical properties are quantified using metrics like the refractive index, Absorption Angstrom Exponent (AAE), and Single Scattering Albedo (SSA). Variations in these parameters arise from differences in particle size, composition, and coating, making accurate characterization critical for accurately estimating BC’s environmental impacts. Current technologies for BC detection span filter-based methods, optoacoustic techniques, and laser-induced incandescence. Filter-based instruments like aethalometers measure light attenuation on a filter tape but suffer from artifacts such as loading effects and sensitivity to light scattering. Optoacoustic devices, also referred to as PhotoAcoustics (PAS), eliminate scattering artifacts by directly correlating light absorption to sound generation. These systems, while accurate, are very expensive as they require high-energy lasers in addition to acoustic resonators and accurate sample conditioning for signal amplification. Laser-induced incandescence provides detailed insights into particle properties through high-energy excitation but has low potential for miniaturization and cost reduction. This thesis advances the field by designing an innovative optoacoustic (or photoacoustic) sensor optimized for cost-effective and artifact-free BC detection which is called a sound refocusing ellipsoid chamber (SREC). The sensor chamber leverages an ellipsoid geometry that focuses acoustic energy efficiently from one focal point to another without requiring resonators, amplifiers, or conditioning systems. Computational fluid dynamics (CFD) simulations validate the design's acoustic properties and robustness, showing it works well across various parameters like excitation volumes, modulation types, and flow conditions. A notable finding is that the SREC supports larger light beams, unlike traditional sensors, reducing the need for expensive optical setups. In addition, we show that the SREC can refocus multiple frequencies simultaneously, for example when a rectangular modulation pulse is used that generates acoustic waves at multiple frequencies. The results demonstrate that the SREC effectively balances cost, acoustic performance, and component protection and is suitable for a low-cost optoacoustic BC sensor. Then, the work of the thesis focuses on the development, testing, and refinement of the novel optoacoustic (OptA) sensor implementing the previously modelled SREC, designed to detect black carbon (BC) particles using a cost-effective approach. Initially, laboratory tests validated the sensor’s core principles, integrating the SREC to refocus sound and a Quartz Tuning Fork (QTF) as the sensitive and low-cost detector. The system’s capabilities were demonstrated using both high-performance and low-cost light sources, including overdriven laser diodes, to detect BC with high sensitivity under varied operational conditions. Lab tests compared the prototype with reference instruments, showing strong performance in measuring BC concentrations and rapid response to concentration fluctuations. The sensor was further evaluated in real-world scenarios during two on-board ship campaigns. It accurately measured BC emissions, correlating well with commercial instruments. However, the initial design faced challenges with background noise and frequent maintenance due to particle deposition. An improved sensor design was able to protect the chamber and reduce contamination, significantly lowering maintenance requirements. Laboratory tests of the updated design confirmed its effectiveness in maintaining a stable background signal over extended use. These advancements highlight the sensor's potential for implementation at many environmental monitoring and emission control applications, e.g. continuous on-board ship monitoring. Finally, the thesis suggests advancements in the development and application of optoacoustic sensor for detecting BC particles. It presents a new model to analyze the physical mechanisms underlying optoacoustic signal generation, particularly focusing on light absorption and heat conduction in BC particles of varying morphologies. The model predicts how particle size, shape, and other properties affect the signal's intensity and more importantly the phase of the generated signal, allowing for a deeper understanding of the relationship between BC particle characteristics and their optoacoustic response. These insights may enable us to distinguish between particle types, such as coated versus uncoated BC or tarballs. The physical mechanisms that are described are very similar to the ones that are currently employed by Laser Induced Incandescence (LII) sensors and can distinguish e.g. between coated and uncoated particles. In conclusion, this thesis addresses critical gaps in BC measurement technology by combining innovative design with low-cost components. The proposed sensor offers a low-cost solution that balances sensitivity and reliability, making it a valuable tool for advancing our understanding and mitigation of BC’s emissions. The novel sensor can enable detailed monitoring in areas previously constrained by cost and logistical barriers, such as remote regions (e.g. Arctic). Its data could guide interventions to reduce BC emissions and their impacts both on climate and human health.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kousias, Nikolaos
  • Κούσιας, Νικόλαος

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/58392

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kousias, Nikolaos; Κούσιας, Νικόλαος. Theoretical and experimental investigation of the optoacoustic phenomenon in black carbon particles aiming to design a low-cost sensor. Aristotle University Of Thessaloniki (AUTH), 2024. http://hdl.handle.net/10442/hedi/58392