University of Thessaly (UTH)
Real-time beam size monitoring with the Beam Gas Vertex demonstrator
Abstract
dc:descriptionThe Beam Gas Vertex (BGV) demonstrator is an innovative diagnostic measuring the transverse beam profile of hadron accelerators in a non-invasive manner using recon- structed tracks from beam–gas interactions. The project has been developed and funded in the framework of the High Luminosity Large Hadron Collider (HL-LHC) work package which investigates the beam instrumentation needs of the Large Hadron Collider (LHC) after the high luminosity upgrades. The project was based on the principles and the experience acquired by the operation of the VErtex LOcator (VELO) detector of the Large Hadron Collider beauty (LHCb) experiment. The installation of the demonstrator in beam 2 of the LHC was finalized in 2016 with the author joining the project at the its final stage. The final goal of the work presented in this dissertation was to prove the feasibility of the beam gas imaging method for non-invasive real-time beam size measurements throughout the operation cycle of the accelerator and for high intensity beams. Such a task had not been accomplished by any LHC diagnostic. This involved the characterization, control and commissioning for most of the detectors hardware, the development of network communication schemes for control and data, the real-time analysis of said data and the development of the necessary monitoring software. The beam–gas imaging method concerns the usage of beam–gas interactions for the direct measurement of the beam shapes. In the BGV case, the particles are emerging due to beam–gas interactions from a specially developed gas target volume along the beam direction while their trajectory is captured from two tracking stations based on scintillating fibres. Additionally, three scintillator-based stations are performing a primary hardware-based selection of the events (L0 trigger) that will be further filtered by a software-based High Level Trigger (HLT) running on a server farm. The HLT is also responsible for the track reconstruction of a valid event and the accumulation of such events so that a real-time beam size measurement can be obtained. The results acquired from the BGV during Run 2 demonstrated the applicability of such a detector for real-time beam size measurements and were validated by comparisons with other LHC beam diagnostics. The BGV managed to provide measurements with a precision < 2% with an integration time of < 30 s. Individual beam proton bunches are measured with a resolution of 5% within 5 min. It clearly demonstrated its potential for beam size monitoring during all operational phases of the machine. That includes the energy ramp, where no other instrument is currently capable of measuring the beam size.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Alexopoulos, Andreas
- Αλεξόπουλος, Ανδρέας
Subjects
dc:subject × 29- Αλεξόπουλος, Ανδρέας
- Ζαμαντζάς, Χρήστος
- Σταμούλης, Γεώργιος
- Κοζύρη, Μαρία
- Alexopoulos, Andreas
- Stamoulis, George
- Zamantzas, Christos
- Koziri, Maria
- BGV
- Beam Gas Vertex
- CERN
- LHC
- HL-LHC
- Επιστήμη Ηλεκτρονικών Υπολογιστών και Πληροφορική
- Φυσικές Επιστήμες
- Επιστήμη ηλεκτρονικών υπολογιστών
- Λογισμικό (software)
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Αυτοματισμοί και Συστήματα ελέγχου
- Computer and Information Sciences
- Natural Sciences
- Computer Science
- Software
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Communication engineering and systems, Telecommunications
- Automation and control systems
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58476