Back to search

University of Crete (UOC)

Development of perovskite oxides as printable solid oxide cell electrodes

Abstract

dc:description

The object of study in this doctoral thesis is the investigation of perovskite oxide materials as printed thin-film electrode components for solid oxide cells. More specifically, the implementation of mechanochemical synthesis on the solid-state synthesis of perovskite metal oxides directly from salt precursors has been explored for the preparation of mainly non-toxic, easy to handle and abundant La1-xSrxTi1-yMnyO3±δ electroceramics, complemented by physicochemical characterization of their structural, morphological, elemental, thermal, electrical and stability properties in ex-situ and in-situ conditions. Parametrization of this route lead to nanosized compounds of pure perovskite structure, with distorted symmetry in regards to the elemental doping and annealing temperature. The pure perovskite phase was achieved after high temperature annealing solely in the cases where the mechanochemical step was implemented, while other synthetic procedures tested at similar synthetic conditions, such as the conventional solid-state synthesis and the wet-chemistry sol-gel (citric route), produced mainly mixed metal oxides, indicating the potential of the solvent-free direct salt precursor mechanochemical synthesis developed in this work. In addition, products of this proposed method were equivalent in quality to comparative state-of-the-art solid-state mechanochemical synthesis using metal oxides as precursors, which was reproduced from literature. Successful synthesis of the target perovskite oxides was followed by the development and systematic study of colloidal dispersions, based on organic solvents and dispersants, by implementing different fabrication and processing methods to achieve optimal, safe, inkjet-printable inks, with appropriate shelf-life and print fidelity. The optimized inks were then utilized in an inkjet printing system for the methodical study on their deposition on different substrates, by altering parameter conditions on the cartridge and platen for consistent drop generation and precision on the deposited patterns. Comparatively, different thick pastes were developed with perovskite oxides, to be used by two additional additive manufacturing methods, screen printing and direct-ink-writing. Fabrication of electrolyte-supported solid oxide cells was conducted with different designs to explore the extend of applicability of the printing methods. First, a simple symmetrical cell design was used, with the different perovskite oxides deposited as single phase electrodes on each side of an YSZ electrolyte in a symmetrical manner by screen printing. Then, a complex symmetrical cell design was implemented on the stoichiometric median case of La0.5Sr0.5Ti0.5Mn0.5O3±δ, with an additional inter-layer of GDC deposited first in a symmetrical manner to act as buffer interface between the electrodes and the YSZ, while the symmetrical electrodes were comprised of a composite layer of La0.5Sr0.5Ti0.5Mn0.5O3±δ mixed with YSZ, followed by a single phase current collector layer of the perovskite, all by screen printing. Furthermore, a multi-layered asymmetrical cell design was followed by depositing a buffer GDC inter-layer, then a composite fuel electrode layer of La0.5Sr0.5Ti0.5Mn0.5O3-δ mixed with GDC on one side and a composite oxygen electrode layer of La0.8Sr0.2MnO3-δ mixed with GDC on the other side, while a single phase current collector layer of each perovskite was deposited on the equivalent side, all by inkjet printing with the optimal inks and printing conditions derived on this study. Finally, a simple asymmetrical cell design comprised of commercially available state-of-the-art materials, the composite La0.8Sr0.2MnO3-δ mixed with YSZ as oxygen electrode and the cermet Ni-YSZ as fuel electrode, were deposited as pastes developed in this work on each side of YSZ disks by direct-ink-writing. After conclusion of the solid oxide cells fabrication, electrochemical evaluation of the most prominent was carried out. Based on cell design, the symmetrical screen-printed cells were evaluated in single-chamber reactors under synthetic air flow, while the asymmetrical inkjet-printed cells were tested in a dual-chamber reactor under synthetic air and humidified hydrogen gas as fuel (on the appropriate electrode). Moreover, the original synthetic perovskites were pelleted and tested electrochemically under synthetic air and under hydrogen gas flows, to enrich the assessment of their properties as electroceramic electrodes.

Degree

thesis:*
Grantor dc:publisher
University of Crete (UOC)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zouridi, Leila
  • Ζουρίδη, Λέιλα

Subjects

dc:subject × 26

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/58566

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zouridi, Leila; Ζουρίδη, Λέιλα. Development of perovskite oxides as printable solid oxide cell electrodes. University of Crete (UOC), 2024. http://hdl.handle.net/10442/hedi/58566