National Technical University of Athens (NTUA)
Ανάπτυξη νανοσύνθετων πολύ-λειτουργικών μεμβρανών και εφαρμογή τους σε περιβαλλοντικές διεργασίες
Abstract
dc:descriptionIn the context of this PhD thesis, porous composite oligo-layered and multi-layered ceramic substrate/graphene oxide (GO) films were successfully prepared through a facile chemical modification method, using short and long molecular linker chains with different functional groups. Ceramic substrates chemically modified with graphene oxide (GO) were laboratory-prepared α-alumina with high repeatability (Al2O3) and commercial ZrO2 cylindrical monoliths. The three different linking agents used were: (3-glycidoxypropyl) trimethoxysilane- GLYMO, (3-aminopropyl) triethoxysilane-APTES and (polydopamine-PDA). The possible morphological and structural characteristics of the pores of the deposited layers were investigated in depth in relation to the binding agent used, combining spectroscopic analyses, morphological analyzes and gas permeability measurements, which revealed the mechanism of gas diffusion through the porous structure under varying pressure and temperature conditions. In addition, an extensive combined study of He transmittance at 25 °C and water permeability was carried out to reveal the deposition morphology of GO on the ceramic substrate, the chemical bonding mode with the bonding agent, and the stability in water. Finally, chemically modified TiO2 nanocrystalline powders (rGO-TiO2, Fe-TiO2 and AgFe-TiO2) photoactive in the visible light region were prepared. Full spectroscopic and morphological characterizations were performed, as well as the evaluation of their photocatalytic properties in the methylene blue pollutant. In detail, oligo-layered graphene oxide (GO) films were prepared on porous ceramic substrates by simply immersing them in GO aqueous solutions. To increase the stability of the grown GO/ceramic composite films and to control the morphology and stacking quality of the formed layers, molecules with micro-chains ((3-glycidoxypropyl) trimethoxy silane- GLYMO, (3- aminopropyl) triethoxy silane-APTES) and macro-chains (polydopamine-PDA). A comparative study was carried out on the ability of the binding agents to enhance the interfacial adhesion between the ceramic surface and the GO deposit and the influence they had on the orientation and characteristics of the neighboring GO nanosheets that constituted the formed oligo-layers. Then, by percolating a GO/H2O suspension through the oligo-layer membranes, the corresponding multi-layer membranes were grown, while ethylenediamine (EDA) was used in the suspension as an effective molecular binding agent that strongly binds and locks the GO nanosheets. The determination of the best binding agent and the best approach was performed on macroporous α-alumina discs, due to the use of economical raw materials and the possibility of their fabrication in the laboratory with high reproducibility. To verify the concept on a larger scale, while investigating the effect of the porous substrate in terms of their micrometric roughness and surface chemistry, specific chemical modifications were replicated in a commercial monolithic channel with a ZrO2 microfiltration layer that yielded membranes with the best gas permeability/selectivity performance. XRD, Raman, ATR, FESEM, and XPS analyzes were conducted to study the structural, physicochemical, surface, and morphological properties of the GO-modified ceramic membrane composites, while the permeability results of various gases at various temperatures and transmembrane pressures were interpreted to shed light on the characteristics of resource structure. Regarding micro-chain linkers, the results confirm that GLYMO induces a denser and more uniform configuration of GO nanosheets within oligo-layered films. PDA had the same beneficial effect, as it is a macromolecule. Overall, this study shows that the development of membranes for gas separations, simply by immersing the chemically modified substrate in a GO suspension, is not a simple matter. The application of postfiltration contributed significantly to this goal, and the quality of the surface-deposited GO sheets depended on that of the chemically modified oligo-layer films. In addition, the permeability properties of the membranes were studied using helium at 25 °C as a probe substance and further analyzed in conjunction with the water permeability results. Helium measurements at 25 °C were chosen to avoid gas adsorption and surface diffusion mechanisms. This approach allowed conclusions to be drawn on the deposition morphology of the GO sheets on the ceramic substrate, the mode of chemical bonding with the bonding agent, and the stability of the deposited GO sheets. In particular, considering that the He permeability is mainly affected by the structural characteristics of the pores, the relative change in the pore size of the grown films compared to the original substrate was first estimated. This was achieved by interpreting the results through the Knudsen equation, which describes gas permeability as proportional to the third power of the pore radius. The calculated relative change in pore size was then entered into the Hagen–Poiseuille equation to predict the corresponding water permeability ratio of the GO films to the original substrate. The reason that the experimental water permeability values may deviate from the predicted ones is related to the different surface chemistry, i.e. the hydrophilicity or hydrophobicity that the composite membranes acquire after the chemical modification. Various characterization techniques were applied to study the morphological and physicochemical properties of the materials, such as FESEM, XRD, DLS and contact angle. Overall, the experimental results showed that the chemically attached GO sheets spread on the top surface of all the films through alternating regions of high and low GO density. Gas molecules can intercalate between the stacked nanosheets by penetrating through GO surface imperfections and are governed by the microporous diffusion mechanism. The low-density regions are characterized by looser binding of the stacked GO nanosheets, and the gas diffusion mechanism ranges from Knudsen to Poiseuille, depending on the distance between neighboring sheets. Therefore, the most effective binding agents are those that result in the dominance of high-density regions within the leaf structure. Spectroscopic analysis of the oligo-layer composite films showed that APTES is anchored to the ceramic surface through its alkoxy groups, with the aliphatic amine chain oriented perpendicular to the substrate surface and is a less effective bonding agent compared to GLYMO and the PDA. Instead, GLYMO was attached to two positions with its alkoxy- and ether groups, thus covering a larger area of the ceramic surface. This conformation resulted in a higher surface concentration of functional groups available for binding to GO. The same behavior was observed for the long PDA chains extending over the entire ceramic surface. These findings were further confirmed by helium permeability measurements at various transmembrane pressures and temperatures, where Al2O3 APTES GO exhibited Poiseuille flow characteristics. In contrast, GO oligolayer films with GLYMO and PDA grown on both types of substrates (Al2O3 and ZrO2), together with all multilayers, exhibited Knudsen diffusion characteristics, while the temperature dependence of the helium permeability revealed the complementary contribution of of diffusion on the microporous surface to the total flow. This feature was more evident for the GO/ceramic composite multilayer films. Finally, by comparing the He/CO2 and He/CH4 separation performance with the expected Knudsen selectivity and interpreting the possible mechanisms of microporous diffusion, it was found that the ZrO2 GLYMO GO-F membrane was able to significantly inhibit the diffusion of larger CH4 molecules. Hence, it is the membrane characterized by the largest extent of dense regions within the structure of the deposited GO sheets. All films presented a continuous layer of GO on their surface without cracks and holes. The thickness of the GO nanosheets for the oligo-layered films ranged from 38 nm to 200 nm, while for the multilayers it was about 4700 nm. Among the composite films, Al2O3 APTMS-GO presented the most negatively charged surface due to the way GO sheets were chemically anchored to the ceramic surfaces. In particular, the carboxyl groups and phenolic hydroxyl groups on the GO surface remained inactive, leading to the highly negative charge of the composite films through their ionization, while in the case of Al2O3 GPTMS-GO the OH groups on the GO surface were consumed in condensation reactions, leading at a lower ζ potential value than Al2O3 APTMS-GO. In addition, an extensive combined study of solar transmittance at 25 °C and water transmittance was carried out to reveal the deposition morphology of GO on the ceramic substrate, the chemical bonding mode with the cross-linking agent, and the stability in water. The results confirmed that, except for the ZrO2 GPTMS-GO and Al2O3 PDA films, all other composite films exhibited much higher hydrophilicity than the corresponding α-Al2O3 and ZrO2 substrates. The high hydrophilicity of ZrO2 GPTMS-GO-F and the sub-nanometer sheet packing of GO make it an effective nanofiltration membrane for many applications, provided it maintains its structure and performance for long periods of time in operation. Overall, tubular geometry was the best choice for tuning the pore size of nanofiltration membranes at the subnanometer scale, as ceramic tubes can withstand much higher values of transmembrane pressures compared to planar Al2O3 substrates. Regarding the chemically modified TiO2 powders with visible light photocatalytic activity, rGO-TiO2 was prepared by hydrothermal method, while Fe-TiO2 and AgFe-TiO2 powders were prepared by hydrolysis through the solution-gel method. Characterization was performed by XRD, Raman, SEM, XPS, DLS, UV-Vis and FTIR. In conclusion, the average crystallite size of all chemically modified powders was found to be in the nanoscale range. In detail, it was calculated to be 7.71 nm for Fe-TiO2, 15.75 nm for AgFe-TiO2 and 5.7 nm for rGO-TiO2. It was observed that rGO-TiO2 powder almost completely degrades methylene blue pollutant. In 150 min of visible light irradiation, MB was 90% degraded by rGO-TiO2, 70% for AgFe-TiO2 and 40% for Fe-TiO2. The AgFe-TiO2 sample and the rGO-TiO2 sample, which were studied in order of their kinetics, were both observed to best fit the pseudo-second-order reaction model, while for the Fe-TiO2 sample, the Langmuir-Hinshelwood model which describes the pseudo-first-order kinetic reaction best fits its photocatalytic behavior. Finally, concluding that the rGO-TiO2 sample presented the best photocatalytic properties, a composite ceramic membrane chemically modified with PDA and rGO-TiO2 was synthesized and characterized with full morphological and physicochemical characterization. Finally, a series of gas permeability and selectivity measurements were performed in: He, CO2 and CH4.The aim of the above thesis was to solve one of the most important problems in membrane technology related to the difficulty of incorporating graphene oxide (GO) into ceramic surfaces with stability. Ceramic substrates are the most suitable choice due to their durability and ability to operate in aggressive environments and high temperatures. Thus, the stability of GO and its excellent mechanical properties combined with the strength of the ceramic substrate form an ideal combination that promises membranes with extended lifetimes. Strong adhesion of the GO layer to the ceramic substrate is the only prerequisite to achieve this goal. Consequently, the correct selection of the binding agents is a critical factor for the successful functionalization of the substrate and the development of a durable membrane. Stability is very important for applications such as wastewater treatment and gas separation for applications such as fuel cells, natural gas separation and purification, biogas processing and purification, CO2 capture and storage, etc.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Galata, Evdokia
- Γαλατά, Ευδοκία
Subjects
dc:subject × 39- Οξείδιο του γραφενίου
- Σύνθετες μεμβράνες
- Μοριακοί συνδέτες
- Μορφολογία εναπόθεσης
- Χημική τροποποίηση
- Διαπεράσεις αερίων
- Διαπεράσεις νερού
- Κεραμικά υποστρώματα
- Μορφολογία πόρων
- Φωτοκατάλυση
- Μπλε του μεθυλενίου
- Αιθυλενοδιαμίνη
- 3-αμινοπροπυλτριμέθοξυσιλάνιο
- 3-γλυκιδοξυπρόπυλτριμέθοξυσιλάνιο
- Ντοπαμίνη
- Οξείδιο του τιτανίου
- Graphene oxide
- Composite membranes
- Ceramic membranes
- Crosslinkers
- Deposition morphology
- Chemical attachment
- Gas permeance
- Water permeance
- Ceramic substrates
- Pore structure
- Photocatalysis
- Methylene blue
- Ethylenediamine
- 3-aminopropyltrimethoxysilane
- 3-glycidopropyltrimethoxysilane
- Dopamine
- Titanium dioxide
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58689