Back to search

Aristotle University Of Thessaloniki (AUTH)

Σύνθεση και μελέτη ιδιοτήτων βιονανοσύνθετων υλικών πολυ(γαλακτικού οξέος) και πολυ(ηλεκτρικού βουτυλενεστέρα) με βιοεξανθράκωμα (Biochar)

Abstract

dc:description

In the last few decades, biobased and biodegradable polymers have attracted considerable attention because of the serious problems of environmental pollution, global warming, and fossil-fuel depletion. In addition, in the last decade, microplastics have caused enormous concern due to their increasing concentration in the human body and in the aquatic environment. In response to these environmental issues, “green polymers” are used as alternative and ecofriendly materials in a wide range of applications. Environmental and economic reasons therefore dictate the shift to new materials produced from renewable raw materials. For the achievement of this goal, new materials should not only have similar properties to conventional polymers, but also a competitive price approaches that of petrochemical polymers. Aliphatic polyesters are among the most widely used biodegradable and bio-based polymers that have been extensively studied in the past. These are the main reasons, also their connections that approach conventional polymers and it continues to attract increasing interest in research and industry. In this context, in the present doctoral thesis, the synthesis of poly(lactic acid) (PLA), poly(butylene succinate) (PBSu) and their bionanocomposites with the addition of biochar as additive/reinforcement was studied. Subsequently, the optimization or not of the properties of the composite materials was investigated in order to fulfill the characteristics for possible application as mulch films in agricultural areas. Three types of biochar were selected, biochar from Miscanthus plant pyrolyzed at 700 °C and biochar from Soft Wood Pellets pyrolyzed at 2 different temperatures, at 550 (BC550) and 700 °C (BC700). Biochar from Miscanthus plant was incorporated into PBSu via in situ polycondensation polymerization and biochar from Soft Wood Pellets was incorporated via in situ ring-opening polymerization. The biochar particles were fully characterized and their size, morphology and physicochemical properties were investigated. In the first part of the dissertation, biochar from Soft Wood Pellets pyrolyzed at 2 different temperatures, at 550 and 700 °C were used as additive in PLA at concentrations of 1, 2,5 and 5 wt.%. via in situ ring-opening polymerization of the lactide. Molecular weight determination techniques confirmed the decrease in molecular weights in the presence of increasing biochar concentration. The success of the synthesis was confirmed by nuclear magnetic resonance (NMR) spectroscopy and, mainly, by Fourier Transform Infrared (FTIR) spectroscopy. Interactions between biochar and PLA were confirmed due to the existence of new bond formation in the carbonyl region. From TEM micrographs, it was found that the biochar has a homogeneous dispersion and its particles are in nanoscale form, indicating that in situ polymerization is a good technique for the synthesis of bionanocomposites. From differential scanning calorimetry (DSC), the strong interactions between PLA and biochar led to a systematic slowdown of the segmental mobility in the bionanocomposites causing the elevation of the glass transition, Tg, despite the opposite effect that we expected due to the decrease in molecular weight. Moreover, the same interactions and the decrease in chain length are responsible for the slight decrease in the degree of crystallinity of the bionanocomposites. The results are slightly stronger for BC700 compared to BC550. The mechanical properties of the bionanocomposites were evaluated by tensile strength, where they are slightly enhanced at low content (1 wt.%) of both biochars and decreasing thereafter due to the low molecular weight of the bionanocomposites with 2.5 and 5 wt.% biochar. Furthermore, the thermal stability and decomposition kinetics were studied thoroughly. All materials show good resistance to thermal degradation. Finally, the bionanocomposites were more hydrophobic than pure PLA, making them more resistant to enzymatic hydrolysis. In the second part of the dissertation, biochar from plant of Miscanthus pyrolyzed at 700 °C was incorporated into PBSu by in situ two-step polycondensation polymerization of succinic acid and 1,4 butanediol. The effects of adding 1, 2.5, and 5 wt.% biochar content on the molecular weight and viscosities of the composites were studied. The presence of biochar in the polymer matrix did not affect the molecular weight of the composites compared to pure PBSu. The success of the synthesis was confirmed by nuclear magnetic resonance (NMR) spectroscopy and, mainly, by Fourier transform infrared (FTIR) spectroscopy, where no shifts in the characteristic peaks were observed. From X-ray photoelectron spectroscopy (XPS), it was found that only physical interactions were taking place between the PBSu matrix and the biochar. From the TEM micrographs, it was found that biochar has a good dispersion, in almost spherical shape and in a nanosized form. From the differential scanning calorimetry (DSC), it was found that biochar acts as heterogeneous nucleating agent, thus facilitating the crystallization of bionanocomposites. In addition, a mild and systematic increase in thermal diffusivity and conductivity was recorded, indicating that biochar is a conductive material. The molecular mobility of PBSu does not change significantly compared to bionanocomposites, while biochar seems to cause an increase in their overall dielectric permittivity. The mechanical properties of bionanocomposites were evaluated with tensile strength and impact strength, where they improve with increasing biochar content and good dispersion in the polymeric matrix of PBSu. Furthermore, the thermal stability and kinetics of decomposition study show that the thermal stability of the bionanocomposites is slightly reduced due to the catalytic effect of biochar. The main degradation mechanism takes place via β-hydrogen bond scission. Finally, the presence of biochar slightly enhances the hydrophilicity of the bionanocomposites and therefore makes them more sensitive to enzymatic hydrolysis compared to pure PBSu. In the third part of the dissertation, the UV exposure of PBSu/BC bionanocomposites produced by in situ polycondensation polymerization was studied for the first time in the literature in order to provide understanding of the aging process. The bionanocomposites, in the form of films, were exposed to UV radiation for 7, 14 and 21 days. According to the measurements of the molecular weight of the composites during aging, it is obvious that by increasing the biochar content, the molecular weight decreases at a lower rate. The photostability was examined by various methods, such as Fourier Transform Infrared Spectroscopy (FTIR), which demonstrated that new carbonyl and hydroxyl groups were formed during exposure to UV radiation. Furthermore, Differential Scanning Calorimetry (DSC) measurements were used to record the effect of UV radiation on the crystalline morphology and their thermal transitions. During aging, the degree of crystallinity fluctuates due to the decrease in molecular weight and the degradation. However, as the biochar content in the bionanocomposites increases, the crystallinity remains stable during their exposure to UV radiation. The mechanical properties and, particularly, the tensile strength show a large alteration during aging. However, the addition of biochar provides protection of the mechanical properties during aging. From the Scanning Electron Microscopy (SEM) micrographs, cracks appear at higher UV exposure times, but to a lesser extent for the PBSu/BC bionanocomposites. Finally, the mechanism of thermal decomposition of pure PBSu and its bionanocomposites before and upon UV exposure proves biochar as an effective UV protection additive in PBSu, capable of mitigating photodegradation.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papadopoulou, Aikaterini
  • Παπαδοπούλου, Αικατερίνη

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/58712

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papadopoulou, Aikaterini; Παπαδοπούλου, Αικατερίνη. Σύνθεση και μελέτη ιδιοτήτων βιονανοσύνθετων υλικών πολυ(γαλακτικού οξέος) και πολυ(ηλεκτρικού βουτυλενεστέρα) με βιοεξανθράκωμα (Biochar). Aristotle University Of Thessaloniki (AUTH), 2025. http://hdl.handle.net/10442/hedi/58712