Aristotle University Of Thessaloniki (AUTH)
Μελέτη της δραστικότητας και απενεργοποίησης ζεολιθικών προσθέτων τύπου ZSM-5 στην διεργασία καταλυτικής πυρόλυσης κλασμάτων πετρελαίου
Abstract
dc:descriptionThe demand for propylene is continuously increasing, and to balance it, the role of zeolitic ZSM-5 additives in the Fluid Catalytic Cracking Process (FCC) must be better investigated. To achieve a better understanding of its operation, the behavior of the additive during its lifespan within a commercial FCC unit must be studied. For this reason, it is necessary to develop laboratory protocols for accelerated deactivation, which can simulate the deactivation of the additive based on the representative conditions of the refinery. In this dissertation, the two non-reversible forms of catalyst deactivation were studied, which result from the presence of steam (hydrothermal deactivation) and the deposition of poisoning metals from the feedstock (petroleum fraction).Classical techniques for the characterization of catalytic materials were applied, such as N2 adsorption porosimetry, acidity measurement with infrared spectroscopy (FTIR) in combination with in situ pyridine adsorption, X-ray diffraction (XRD), and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), to determine their physicochemical characteristics, correlate them with the degree of their deactivation, and understand their effect on catalytic behavior. To study the impact of hydrothermal deactivation, a "pure" crystalline ZSM-5 zeolite (i.e., not mixed with other components), an amorphous silica-alumina (SiO2-Al2O3), and commercial ZSM-5 catalytic additive containing silica-alumina were initially used. These materials were deactivated using a specific hydrothermal treatment protocol, to compare the behavior of these materials under the same conditions. This study compared the changes in their physicochemical characteristics to further understand the changes in ZSM-5 additives. Next, the deactivation of the ZSM-5 additive was studied using two different protocols concerning temperature (at 788°C and 815°C) for a constant time of 20 hours. The fresh and deactivated samples were examined in the pyrolysis of model gasoline molecules, specifically n-dodecane, n-heptane, 1-hexene, cyclohexane, and a mixture (1-hexene: cyclohexane, 1:3 w/w). Compared to the fresh sample, the two deactivated samples had lower catalytic activity in the cracking of the model molecules, but their overall selectivity did not change, always favoring the production of LPG olefins. In the study of hydrothermal deactivation, the degree of deactivation was examined in relation to the deactivation temperature (788-870°C) for a constant duration of 20 hours and in relation to the duration (12-72 hours) for a constant temperature of 804°C. Determining the degree of deactivation in both studies contributed to developing a kinetic model of ZSM-5 deactivation. The produced samples were mixed with equilibrium catalyst (ECAT), and the mixtures were tested in vacuum gas oil (VGO) pyrolysis experiments. In these experiments, besides the differentiation in activity (conversion of gas oil and yield), there was also a differentiation in product selectivity. These differentiations are mainly correlated with the degree (intensity) of deactivation and its effect on the acidity of the ZSM-5 catalytic additives. Thus, the observed selectivity changes with varying acidity were a 1.6% decrease in propylene, a 0.6% decrease in ethylene, and a 1.8% increase in butylenes for each unit reduction in the Brønsted acidity of the ZSM-5 additive. In addition to the impact of hydrothermal deactivation parameters, the effect of phosphorus addition and the hydration of deactivated zeolites with phosphorus were also studied. Hydration appeared to increase the acidic sites of the zeolite, which can be explained by the presence of phosphorus that has the ability to form compounds with hydroxyl groups. These results were confirmed by catalytic evaluation when the respective zeolitic samples were mixed with ECAT and studied in VGO pyrolysis experiments. The presence of phosphorus enhances the stability of the zeolite, and its activity in gasoline pyrolysis increases by 14%. Similarly, gasoline pyrolysis increases by 13% with the hydration of the deactivated sample. Finally, the ZSM-5 additive was deactivated by the deposition of poisoning metals using the cyclic deactivation technique. Additionally, through the method of separating age fractions in an industrial mixture of ECAT equilibrium catalyst and ZSM-5 additives, the ZSM-5 additive was studied concerning the dispersion of poisoning metals. It was observed that the nickel dispersion in the industrial sample is similar to that in the laboratory-deactivated sample and differs from that on the Y catalyst (the main zeolite of fluid catalytic cracking - FCC).In the pyrolysis experiments of n-hexane, it was observed that the increase in Lewis acidity in the deactivated ZSM-5 sample enhances pyrolysis activity at low concentrations of poisoning metals. It was reaffirmed that there are no changes in selectivity in the n-hexane pyrolysis experiments, in contrast to the corresponding results in VGO pyrolysis where the changes in selectivity were significant. Specifically, a decrease in selectivity for ethylene by 1%, for propylene by 6%, and an increase for butylenes by 3.5% was observed with the increase in metal concentration from low to high levels.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gkousev, Andreas
- Γκούσεβ, Ανδρέας
Subjects
dc:subject × 37- Ζεόλιθοι
- Ετερογενή καταλυτικά συστήματα
- Διεργασία καταλυτικής πυρόλυσης
- Προπυλένιο
- Βουτυλένιο
- Αεριέλαιο
- Βενζίνες
- Σίλικα
- Αλουμίνα Al2O3
- ZSM-5
- Fluid catalytic cracking
- Fluid catalytic cracking (FCC) catalyst
- Zeolites
- Zeolite catalysis
- Liquified petroleum gas
- Gasoline
- OCTANE OF GASOLINE
- Light cycle oil
- Heavy Cycle oil
- Vacuum gasoil
- Propylene
- Butylenes
- Silica
- Alumina Al2O3
- Clay
- Χημεία
- Φυσικές Επιστήμες
- Εφαρμοσμένη χημεία
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Chemical Sciences
- Natural Sciences
- Applied Chemistry
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58713