Aristotle University Of Thessaloniki (AUTH)
Συγκριτική μελέτη (in vitro) προσδιορισμού ασφαλών παραμέτρων σχετικά με την αύξηση ενδοπολφικής θερμοκρασίας κατά την διαδικασία λεύκανσης με blue diode laser 445 nm
Abstract
dc:descriptionABSTRACT The aim of the first part of this in vitro study was to investigate the safety of using blue diode laser (445 nm) for tooth bleaching focusing on the intrapulpal temperature increase under various power and time settings. Fifty human mandibular incisors (n=10) were used for evaluating temperature rise inside the pulp chamber during laser-assisted tooth bleaching. It is noteworthy that, in addition to measuring the intrapulpal temperature, the temperature of the bleaching gel applied to the tooth surface was also recorded during the treatment to indirectly assess the gel's absorption of laser radiation. The change in temperature was recorded using K thermocouples for the five experimental groups (without laser, 0.5 W, 1 W, 1.5 W, 2 W) at each point of time (0, 10, 20, 30, 40, 50, 60 sec). As the power of the diode laser increases, the temperature inside the pulp chamber also increases and that of the bleaching gel was significantly higher in all the experimental groups (p<0.05). However, the intrapulpal temperature rise was below the threshold for irreversible thermal damage of the pulp (5.5°C). Power of a diode laser (445 nm) ranging between 0.5-2 W and irradiation time between 10-60 sec were considered safe regarding the pulp health when a red-colored bleaching gel was used. Clinical studies should confirm the safety and effectiveness of such tooth bleaching treatments. The outcomes of the present study could serve as a valuable guide for dental clinicians, using diode lasers (445 nm) for in-office tooth bleaching treatment, helping them choose appropriate power settings and irradiation durations while ensuring the safety of the pulp. The aim of the second part of this in vitro study was to evaluate the effectiveness of a laser-assisted in-office tooth bleaching treatment, employing blue diode laser (445 nm) using different power and time settings. Two hundred human mandibular incisors were collected for evaluating tooth color change (ΔΕ00) and whiteness index in dentistry (ΔWID) following laser-assisted tooth bleaching treatment. The specimens were distributed into 25 groups (n=8) according to laser output power (0.5-2 W) and duration of irradiation (10-60sec) that was applied. ΔΕ00 and ΔWID were evaluated using a spectrophotometer at three points of time (24h, 1week and 1 month after treatment). Three-way ANOVA revealed that power, duration of laser irradiation and time of measurement after bleaching treatment significantly affected both ΔΕ00 and ΔWID (p<0.05). Furthermore, laser irradiation in-creased ΔΕ00 and ΔWID at all applied powers compared to the control group (p<0.05), but this increase was dependent on the duration of the irradiation. Laser irradiation significantly increased ΔΕ00 when the duration of the operation was 50-60 sec at 0.5-1 W, while at 1.5-2 W was significantly increased when the duration was 30-60 sec. ΔWID was significant higher in the laser groups compared to the control groups at all powers, except for 0.5 W where it was significant higher when the duration was 50-60 sec. The outcomes of the study can help in selecting the suitable power settings and duration of laser exposure to achieve the optimal whitening results while ensuring the safety of the tooth pulp. Keywords: tooth bleaching, diode laser, power settings, intrapulpal temperature, color change.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papadopoulou, Angeliki
- Παπαδοπούλου, Αγγελική
Subjects
dc:subject × 10Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58735