Back to search

Aristotle University Of Thessaloniki (AUTH)

Καταλυτική μετεπεξεργασία καυσαερίου σε δίχρονο κινητήρα αμμωνίας

Abstract

dc:description

The shipping industry is responsible for nearly 3% of global greenhouse gas (GHG) emissions, contributing significantly to global warming. In addition to GHG emissions, the maritime sector also releases other pollutants that are harmful to human health and the environment. To comply with the ambitious environmental targets, the industry has invested substantial capital in the development of technical solutions to reduce pollutant emissions. In particular, the use of alternative fuels is a promising solution to reduce GHG emissions from combustion. Among alternative fuels, ammonia (NH3) is considered a promising solution for carbon emissions reduction. This study aims to design and model an exhaust gas aftertreatment system for NH3-fueled engines, targeting the reduction of unburned NH3, nitrogen oxides (NOx), and nitrous oxide (N2O). To achieve this goal, small-scale experimental measurements are conducted using a synthetic gas bench (SGB). The research examines both conventional catalytic technologies used in diesel engines (V-SCR, Cu-SCR, Pt-AOC) and novel technologies specifically adapted for NH3-fueled engines (Fe-SCR and Cobalt-catalyst). The experimental data obtained are utilized for the calibration and development of physico-chemical simulation models. These models facilitate the representation of the phenomena occurring within the catalysts and the analysis of critical parameters such as temperature, flow rate, and exhaust gas composition. The calibrated models are subsequently applied to expected exhaust gas conditions in two-stroke NH3 engines. The study's objective is to determine the optimal architecture, dimensions, and NH3 injection strategy that achieve the best compromise between pollutant reduction and GHG mitigation. Given the uncertainty regarding the precise ammonia-to-NOx ratio (ANR), the exhaust system is designed for three different ANR scenarios: ANR<1, ANR=1, and ANR>1. When ANR is less than or equal to one, an SCR system with or without NH3 injection is effective. However, in the case of excess NH3 (ANR>1), an additional ammonia slip catalyst (ASC) is required to reduce unreacted NH3. To study a wide range of ANR values, the expected NH3 combustion performance under varying NOx concentrations is examined. The integration of the ASC catalyst leads to increased N2O production, which limits the overall efficiency of the system in reducing GHG emissions. Therefore, factors influencing N2O formation in the ASC are investigated. Two key parameters are analysed: species diffusion (via the tortuosity factor ‘τ’) between the SCR and AOC layers, and the use of a hybrid AOC catalytic coating that combines cobalt (Co) and (Pt) based technologies. Increase of τ (reduction of diffusion) in the SCR coating decreases N2O production, improving GHG emission levels by up to 15%. Furthermore, the combined use of Co + Pt catalytic technologies enhances NH3 oxidation efficiency while simultaneously reducing N2O selectivity. The application of this hybrid coating achieves up to 50% greater GHG emission reduction compared to the exclusive use of platinum-based coatings.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Voniati, Georgia
  • Βωνιάτη, Γεωργία

Subjects

dc:subject × 17

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/58765

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Voniati, Georgia; Βωνιάτη, Γεωργία. Καταλυτική μετεπεξεργασία καυσαερίου σε δίχρονο κινητήρα αμμωνίας. Aristotle University Of Thessaloniki (AUTH), 2025. http://hdl.handle.net/10442/hedi/58765