Aristotle University Of Thessaloniki (AUTH)
Παρακολούθηση μικροπλαστικών και ιικού φορτίου στα αστικά λύματα
Abstract
dc:descriptionThe present thesis focuses on a) the identification of microplastics (MP) in Wastewater Treatment Plants (WWTP), their removal rates and the amounts that are finally discharged from WWTPs, based on all available literature and b) SARS-CoV-2 identification in wastewater, as well as its fate and transport through the sewer system. An optimization procedure is proposed for selecting monitoring points, in terms of number and location across the sewer system, aiming at the assessment of COVID-19 disease dispersion in the community. More analytically, in Part 1, existing literature on the presence of MPs in WWTPs and their fate during treatment is reviewed and analyzed. Collected data concern: MP concentration at the influent and the effluent, at intermediate stage and in the sludge and other solid waste of the WWTP, total removal rates and removal rates per treatment stage, sampling and analysis methods, level of treatment applied in each plant, size, morphology and material of identified MPs, as well as total quantity of MPs that are released to the environment with wastewater and sludge effluent. The main findings are presented herein. Concentration of MPs in wastewater effluents is between 0.005 and 1,294MP/L, but usually it is lower than 13MP/L. There is a significant difference between influent and primary treatment effluent concentration, similarly between primary and secondary effluent concentration, while there is no significant difference between secondary and tertiary effluent concentration. Total removal rates of the reviewed WWTPs are between 57.2% and 99.9%, however in most cases it is higher than 80%. In addition, there is significant difference between secondary and tertiary treatment removal rates. The greater amount of MPs is removed during primary treatment. Removal rates of pre-treatment (screening, grid and grease removal) and primary sedimentation are not significantly different, however primary sedimentation appears to have high removal performance rate, even in cases where pre-treatment stage is absent. The main process of MPs removal during wastewater treatment are: a) the entrapment of larger MPs on screens or those adhered to other large items, b) the natural settling or settling with other particles while adsorbed on them, c) the removal with grease skimming for lighter particles that remain in flotation, d) the enhanced settling with chemical additives, e) the retention of advanced filtration and membrane technologies. Smaller particles are usually more abundant in samples and their percentage is usually increased in the effluent, due to lower removal rates or fragmentation during treatment. The most common MPs identified in samples are fibers followed by fragments. Fibers’ percentage is increased in the effluent due to lower removal rates since small fibers are less susceptible to sedimentation and their shape allows the crossing of the filters and membranes. The most common materials identified of MPs in WWTPs are PP, PE, PS, PET, acrylates, nylon, synthetic cellulose and PB, ABS if stormwater contributes in WWTP under study. The main sources of MPs found at municipal WWTPs are textiles’ fibers and particles that are intentionally added in products such as cosmetics and detergents. MPs that are removed in the wastewater treatment process, remain in sludge and exit the plant. The treated sludge is an important product of the facility and can be used in soil improvement or agricultural land, but after careful analysis of its quality characteristics. WWTPs can release to the environment millions of MPs with treated wastewater and billions of MPs with treated sludge, daily. The results of this study offer to the scientific world an inclusive and thorough understanding of the current capability of the WWTPs to remove microplastics from wastewater and sludge, and contribute to the improvement of the processes involved in order to decrease the amount of MPs released into the environment, taking into account the extensive use of plastics not only in packaging, but also in cosmetics and clothes. In Part 2, an optimization procedure is proposed for optimal selection of sampling points for detecting SARS-CoV-2 RNA in sewer systems. The proposed methodology comprises a three-step procedure: hydraulic simulation - optimization - decision making. Initially, the hydraulic modelling of the sewerage, with the simulation of fate and transport of SARS-CoV-2 RNA in the sewerage is employed. Data extracted from the hydraulic simulation, is utilized in the calculation of objective functions’ values required for the optimization algorithm. The optimization algorithm is then executed and a pareto-front containing the non-dominated solutions is generated. Following, a decision-making process is carried out for picking certain well-balanced solutions among the non-dominated solutions. Finally, a validation of the results is carried out. EPA’s SWMM is used for the hydraulic simulation of the sewer system and for the virus’ fate and transport simulation. The NSGA-II optimization algorithm is also used. A small indicative sewer collection system along with the collection system of the city of Kozani, Greece, are used as study areas, for the application of the proposed methodology. Time series data of SARS-CoV-2 RNA concentration across the sewer system are obtained under different scenarios of a) initial concentration, b) decay rate of SARS-CoV-2 RNA, and c) entrance points of initial concentration. Additionally, a sensitivity analysis of the model is performed in order to assess initial concentration and decay rate effects on concentration at each node of the sewerage. The objective functions under evaluation are: first detection time, detection likelihood, population that can be inspected in addition to joint entropy and total correlation of each combination of sampling points, in order to find the most informative solutions. Different combinations of objective functions are considered. The main conclusions are the following: a) for the small collection system, 1 to 3 sampling points are adequate, while for the collection system of Kozani city, 4 to 7 sampling points are required, b) the inlet point to the WWTP as the only sampling point is not adequate, in medium and large sewer systems, especially in case of early warning systems, due to low detection likelihood and information content, c) an effective option for sampling points location is to be well distributed across the sewerage system, because upstream points are not able to inspect the whole population, while downstream points are more susceptible to critical concentration reduction due to decay of viral RNA. For validation, some extra scenarios are run with different entrance points. Those scenarios’ results are used to evaluate the ability of the proposed solutions to detect the virus. The optimization procedure considers as objective functions the maximization of the joint entropy and the minimization of the total correlation appear to have the best performance under validation scenarios. It is important that the special characteristics of the sewer systems along with the purpose of wastewater surveillance should always be considered before sampling point selection.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gkatzioura, Argyro
- Γκατζιούρα, Αργυρώ
Subjects
dc:subject × 26- Βελτιστοποίηση
- Επιδημιολογία λυμάτων
- Δίκτυα αποχέτευσης
- Εγκαταστάσεις επεξεργασίας λυμάτων
- Μικροπλαστικά
- Ιικό φορτίο
- Αστικά λύματα
- SARS-CoV-2
- Ποιότητα νερού
- Optimization with genetic algorithms
- Wastewater based epidemiology
- Sewer networks
- Wastewater treatment plants
- Microplastics
- Viral load
- Water quality
- Urban wastewater
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολιτική μηχανική
- Περιβαλλοντική Μηχανική
- Επιστήμη και Τεχνολογία υδάτων
- Civil Engineering
- Engineering and Technology
- Environmental Engineering
- Water Science and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59283