Ελληνικό Μεσογειακό Πανεπιστήμιο
Βελτιστοποίηση προϊόντων 3D εκτύπωσης με τη χρήση καινοτόμων πρόσμικτων υλικών από πλαστικό και βιοεξανθράκωμα
Abstract
dc:descriptionThis doctoral dissertation investigates and optimizes composite materials for use in Additive Manufacturing (AM) technologies, with an emphasis on 3D Printing via melt extrusion and resin photopolymerization. The study focuses on the use of biochar as a reinforcing filler in thermoplastic matrices, aiming to enhance the mechanical, thermal, and structural properties of printable composite materials. The research approach is based on a combined assessment of experimental data and theoretical models to study the behavior of materials such as PLA, ABS, PP, HDPE, and PETG, both in their pure form and in combination with various concentrations of biochar. The development, fabrication, and processing of composite filaments were carried out under controlled extrusion and photopolymerization parameters. Extensive characterization followed, employing techniques such as SEM, EDS, TGA, DSC, BDS, Raman spectroscopy, and MFR measurements. Particular emphasis was placed on examining the effect of biochar on enhancing tensile and flexural strength, hardness, and thermal stability of the materials. The selection of biochar was justified based on its environmental sustainability and multifunctional properties, while optimal concentrations and processing conditions that lead to high performance in AM processes were explored. This study contributes to the research community by offering, for the first time, a detailed and quantitative evaluation of the effects of olive-derived biochar on pure polymers. It provides a documented framework for material selection and the design of composite filaments for engineering, industrial, and environmental applications. Furthermore, it offers comparative data for assessing the compatibility of a sustainable, eco-friendly material—olive-derived biochar—with various thermoplastics, thereby supporting more rational material choices in AM. Specifically, Chapter 1 introduces the most commonly used 3D printing materials (PLA, ABS, PP, HDPE, and PETG), the available filler material options, and their key mechanical, thermal, and chemical properties. It analyzes the impact of additives on 3D-printed products, the evaluation methods, and the techniques for their application. Chapter 2 discusses the raw materials used for biochar production and describes the production process in detail, with specific reference to pyrolysis and its types. The properties, characteristics, and most common applications of biochar are examined, followed by a literature review of the current state of knowledge regarding biochar-based 3D printing composites. Chapter 3 presents in detail the two experimental techniques followed in the dissertation for the fabrication and evaluation of biochar-reinforced composites: fused filament fabrication (FFF) and the preparation of biochar-infused materials for resin 3D printing. Chapter 4 analyzes the results related to the PETG/biochar composite, with a detailed account of mechanical tests, SEM imaging, Raman spectroscopy, TGA and DSC analyses, and measurements of viscosity and melt flow rate. Chapter 5 presents the results for the other materials studied, namely ABS, PLA, PP, and HDPE, each combined with biochar. Finally, Chapter 6 summarizes the conclusions drawn from the completion of this doctoral dissertation.
Degree
thesis:*- Grantor dc:publisher
- Ελληνικό Μεσογειακό Πανεπιστήμιο
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bolanakis, Nikolaos
- Μπολανάκης, Νικόλαος
Subjects
dc:subject × 17- Θερμοπλαστικά σύνθετα υλικά
- Βιοεξανθράκωμα
- Προσθετική κατασκευή
- 3Δ εκτύπωση
- 3D εκτύπωση
- 3d printing
- Biochar
- Additive manufacturing
- composite nanomaterials
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολυμερή και Πλαστικά
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Materials Engineering
- Engineering and Technology
- Polymers and Plastics
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59367