Back to search

Aristotle University Of Thessaloniki (AUTH)

Utilization of nanocellulose and nanoimprint lithography for the synthesis of novel nanocomposite polymeric materials with advanced properties

Abstract

dc:description

Biomass-derived materials are replacing petroleum-derived products, leading the pathway to more sustainable and biorefinery-based technologies. Cellulose, the most abundant polymer in nature, is distinguished for its exceptional properties, with its nanocellulose derivatives attracting increasing interest as polymer reinforcement agents. In the context of the present thesis, the development of hydrothermal processes for the isolation of cellulose from various sources of lignocellulosic biomass was investigated, following the principles of a biorefinery approach. The isolated cellulose was subsequently converted into nanocellulose through the application of both mechanical and chemical treatments, resulting in the production of cellulose nanoparticles/nanofibers (CNFs) and cellulose nanocrystals (CNCs), respectively. The resulting nanocellulose types were utilized as reinforcing agents in different polymeric matrices, specifically in thermosetting adhesive resins: urea-formaldehyde (UF), melamine-formaldehyde (MF), epoxy resins, and poly(furfuryl alcohol) (PFA) resins. Furthermore, in order to enhance the water repellency and the antibacterial performance of the final materials, micro/nanostructures of various dimensions were imprinted onto the surfaces using thermal nanoimprint lithography (t-NIL). All types of nanocellulose, as well as the resulting polymer nanocomposites, were characterized in terms of their physicochemical, thermal, and mechanical properties. The water contact angles and antimicrobial performance of the nanoimprinted surfaces was also assessed. The thesis initially focuses on the study of different combinations of pretreatment/fractionation processes towards a complete biorefinery approach, based on the selective fractionation and recovery of cellulose, hemicellulose, and lignin. The biomass sources under study involve commercial beechwood sawdust as well as agricultural residues and namely olive, poplar and wheat straw prunings. Each biomass type was treated with hydrothermal treatments following one or two-step fractionation processes. Each type of biomass was subjected to hydrothermal treatments in either hot water or ethanol–water mixtures (Organosolv) using a batch autoclave reactor under mild pressure and temperature conditions, following either a single-step or a two-step fractionation process. It was found that the application of the Organosolv process in the presence of an acid catalyst (H₂SO₄) significantly enhances lignin removal and consequently improves the yield of pure crystalline cellulose in all biomass types. Furthermore, it was demonstrated that hydrothermal pretreatment of commercial beechwood in the presence of dilute sulfuric acid (H₂SO₄, 0.25% v/v), followed by Organosolv treatment with an acid catalyst, leads to an effective fractionation and enhanced recovery of all three biomass components. Specifically, hemicellulose removal reached up to 80 wt%, delignification achieved 71 wt%, and cellulose recovery ranged between 68–84 wt% relative to the initial biomass. Following determination of lignocellulosic biomass composition, the pretreated solid biomass samples were characterized as to their physicochemical and morphological properties. The effect of both the type of biomass and the hydrothermal pretreatment method on the recovery yields and the thermal and physicochemical properties of the cellulose-enriched solid residues was examined. The results varied in terms of recovery percentages and physicochemical characteristics, depending on both the biomass source and the specific hydrothermal process applied. All pretreated samples were then used for the production of pure cellulose, during which three different bleaching methods were evaluated. The CH₃COOH/NaClO₂ bleaching method was identified as the most effective, achieving the highest yield of pure, highly crystalline cellulose (up to 99% based on the pretreated biomass) with a shorter reaction time. All cellulose samples, derived from each of the four aforementioned biomass sources, were characterized with respect to their physicochemical, morphological, and thermal properties. The isolated celluloses were subsequently used for the production of nanocellulose via mechanical and chemical treatments. An optimization study of the applied mechanical methods was initially conducted using commercial microcrystalline cellulose (Avicel) as the starting material. The mechanical processes included high-intensity ultrasonication, high-shear blending, and planetary ball milling, and were applied for the production of cellulose nanoparticles/nanofibers (CNFs). High-intensity ultrasonication and high-shear blending resulted in particles with an average diameter ranging from 170 to 300 nm, while ball milling led to a significant size reduction of the initial cellulose from 65 μm down to approximately 10 μm. Subsequently, cellulose nanocrystals (CNCs) were produced via conventional sulfuric acid hydrolysis (64 wt% H₂SO₄), yielding particles with sizes ranging from 80 to 500 nm and exhibiting increased crystallinity. All micro- and nanoscale cellulose particles produced were characterized in terms of their physicochemical, morphological, and thermal properties. Additionally, the effect of each treatment on nanocellulose yield was also examined. Followingly, the produced cellulose micro/nanoparticles were incorporated into various polymer substrates. Aiming to use green, solvent-free additives, the utilized nanocellulose were not surface modified and added either as freeze dried or as aqueous slurries into various polymer matrices. These included polymers commonly used as adhesives/coatings and namely urea formaldehyde (UF), melamine formaldehyde (MF), epoxy and poly (furfuryl alcohol) (PFA) resins. The nanocellulose reinforced resins were studied in terms of their physicochemical, thermal and mechanical properties. Possible interactions between the additive and the polymer substrate were also examined. In addition, UF and MF composite resins were used for the production of particle boards that were tested for their mechanical performance and for their formaldehyde emissions. Incorporation of nanocellulose into UF resins resulted in reduced formaldehyde emissions, while its integration in epoxy resins enhanced their thermomechanical properties and increased their thermal stability. Moreover, its addition to PFA resins enhanced the formation of carbonyl species, improved the rubbery-state storage modulus, enhanced their thermal stability (by up to ~15 °C increase in Td,10%), and significantly raised the glass transition temperature (Tg) up to 30 °C. Finally, this thesis explores the application of thermal nanoimprint lithography (t-NIL) on nanocellulose reinforced polymers for enhanced surface water repellency and antibacterial activity. For this purpose, nanocellulose was used as an additive in melamine-formaldehyde resins (MF), commonly used for particle board lamination. The resulting composite particle boards were subsequently laminated under standard pressure and temperature conditions with the simultaneous application of nanoimprint lithography. Optical and Scanning Electron Microscopy observations reveal the successful and uniform implementation of micropillars of approximately 3.5 μm width and 7 μm height on the boards’ surfaces. The latter were subsequently examined as to their wetting (water repellency) and antibacterial properties. The antimicrobial activity was evaluated against two bacterial strains: the gram-negative Escherichia coli (E.coli) and gram-positive Staphylococcus aureus (S. aureus), according to ISO 22196 protocol. The study also involved the reusability of the nanoimprint molds. It was shown that the molds could be reused at least two times without causing any damage to the microstructures during the replication process. Finally, the micro/nanopatterned composite surfaces exhibited notably improved water repellency and strong antibacterial efficacy against both E.coli and S. aureus. The results demonstrate the promising potential of t-NIL for the sustainable fabrication of advanced nanocomposite wood panels, which exhibit enhanced water repellency - approaching the hydrophobic threshold - and strong antimicrobial properties.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Psochia, Eleni
  • Ψώχια, Ελένη

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/59372

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Psochia, Eleni; Ψώχια, Ελένη. Utilization of nanocellulose and nanoimprint lithography for the synthesis of novel nanocomposite polymeric materials with advanced properties. Aristotle University Of Thessaloniki (AUTH), 2025. http://hdl.handle.net/10442/hedi/59372