University of Patras
Πολυλειτουργικά νανοδιηλεκτρικά πολυμερικής μήτρας/ αλλοτροπικών μορφών άνθρακα/ κεραμικών εγκλεισμάτων: ανάπτυξη, χαρακτηρισμός και αποθήκευση ενέργειας
Abstract
dc:descriptionIn the present doctoral thesis, series of composite nanodielectrics were developed by employing an epoxy resin acting as matrix along with nano-carbon allotropes (namely Carbon Black/CB, Multiwall Carbon Nanotubes/MWCNT, Graphene Nanoplatelets/GnP and Nanodiamonds/ND) and magnetite nanoparticles as reinforcing phase varying the filler type and content. Scanning Electron Microscopy (SEM) images confirmed the successful manufacturing and high quality of the nanocomposites. Uniform distribution and dispersion of nanoparticles within the polymer matrix was achieved and the formation of large aggregates was avoided even at high filler content. Differential Scanning Calorimetry (DSC) was employed for the investigation of the thermal properties of the nanocomposites. An endothermic step-like process was recorded in the thermograms of all examined systems, which was identified as the transition from the glassy to the rubbery state of the polymer matrix. The variation of the glass transition temperature with filler content can give an insight into the various interactions occurring inside the materials The higher glass transition temperature values than the neat epoxy exhibited by all hybrid nanocomposites imply strong adhesion of the reinforcing phase to the polymeric matrix. The addition of carbon nanoparticles delivers a progressive increase in Tg values with filler content. On the other hand, even though glass transition temperature increases further with the addition of magnetite nanoparticles, its effect appears to be less pronounced. The results from the static tensile tests and Dynamic Mechanical Analysis (DMA) demonstrated that the addition of both types of filler enhances the mechanical performance of the nanocomposites leading to increasing values of the tensile elastic modulus and the flexural storage modulus, respectively. The systematic increase in the tensile modulus values with filler loading denotes the ability of the nanoreinforcements to impart greater stiffness to the nanocomposites and is ascribed to the inherent stiffness and rigidness of the nanoparticles. The interfacial bonding provided by the strong interactions between the matrix and the nanoinclusions effectively impacts the load transfer from the polymer matrix to nanofillers. Overall, it can be noted that the reinforced systems do not display a clear/typical brittle performance with filler loading, since the diminishing fracture toughness and elongation at break values are not met with a respective increase in tensile strength but on the contrary, tensile strength values decrease with filler concentration, while Young’s modulus systematically increases. This behavior can be considered as a “stiffness strengthening” which ceases at higher mechanical loads, where the stress concentration at the nanoparticles, which are anchored at the macromolecular chains, leads to a failure at the interface. The dielectric response of the nanocomposite systems was carried out by means of Broadband Dielectric Spectroscopy (BDS). Values of ε′ systematically increase with filler content in the whole frequency range, mainly due to the enhanced conductivity of the carbon nanofillers for all systems, with the exception of nanocomposites filled with nanodiamonds. The extremely high values of ε′ at high filler content for the Carbon Black and MWCNT filled systems, attributed to the enhanced electrical heterogeneity between the insulating matrix and the highly conductive nanoinclusions, providing indirect indications of an insulator to conductor transition. The addition of magnetite nanoparticles induces a remarkable increase in polarization especially in the hybrid systems filled with Carbon Black and MWCNT compared to the relative “conventional” (binary) nanocomposites.AC conductivity increases with filler content due to the higher conductivity values of the nanocarbon inclusions. The abrupt increase of several orders of magnitude for the Carbon Black and the MWCNT systems along with the frequency-independent behaviour for the high filler content of these systems signifies a clear indication for the transition from the insulating to the conductive behaviour of the respective nanocomposites. Regarding the MWCNT filled hybrid nanocomposites, although carbon nanoparticles are the major contributor to the systems‘ conductivity, the addition of a small amount of magnetite nanoparticles seems to increase even further the recorded conductivity and more importantly to shift this critical filler concentration to lower values. Conductivity data were analyzed with regard to the percolation theory, and the percolation threshold was determined. The dependence of conductivity on temperature and the Variable Range Hopping model were employed in order to reveal the charge transport mechanisms below, in the vicinity, and above the critical concentration. By these means, it can be suggested that hopping conductivity is the main charge transport mechanism of the examined systems, below the critical concentration. Above the percolation threshold, another conduction mechanism is introduced, resembling the metallic type of conduction, due to the charge migration via physical contacts of the conductive sites. Since the electrical conductivity of polymer nanocomposites is also sensitive to many other types of indirect stimuli, they have potential applications in smart materials for sensing temperature, detecting organic solvents or vapors, water/humidity, and volatile organic compounds, etc. All of these sensing functions are directly caused by the network change due to deformation/disruption of the contacts between carbon nanofillers upon external stimuli. For example, electrically conductive polymer composites show both negative temperature effect (NTC) and positive temperature effect (PTC) upon cooling and heating, respectively, which provides the capability to sense temperature and also to vary their response. A similar behaviour is recorded in the spectra of the hybrid nanocomposites where the addition of magnetite nanoparticles in systems with low MWCNT content is accompanied by the altering of the temperature coefficient of conductivity from positive to negative values. In hybrid systems with Carbon Black reinforcement, peaks are observed in the diagrams depicting the variation of the temperature coefficient of conductivity with temperature, which were not recorded in the corresponding diagrams for the two-phase systems. The intensity of the peaks presented in the hybrid systems is enhanced by the Carbon Black content, i.e. nanocomposites with increased conductivity values. Dielectric analysis revealed three distinct relaxation mechanisms in all examined systems. At high temperatures and low frequencies Maxwell-Wagner-Sillars (MWS) effect, also known as Interfacial Polarization (IP), was recorded, due to the accumulation of free charges at the interface between the matrix and the filler. At intermediate frequencies and temperatures, the glass to rubber transition (-relaxation) of the polymer matrix was observed and finally at high frequencies, the reorientation of small polar side groups of the polymer chain (-relaxation) was present. Relaxation dynamics provided information about the molecular dynamics of the examined systems by calculating the activation energy and Vogel temperature (Τo) of the respective relaxation. For some nanocomposites well into the insulator-conductor transition area, a dielectric relaxation was recorded that exhibits atypical (counter-Arrhenius) temperature dependence and is attributed to intraparticle and interparticle (intrinsic) interfacial polarization mechanisms, due to the orientation with the alternating electric field of dipole moments formed by electron displacement within filler clusters. The ability of the fabricated nanocomposite systems to store energy was investigated via the dielectric reinforcing function and DC charge-discharge tests. Both energies increase with filler content due to the enhanced electrical properties of the carbonaceous nanoparticles compared to the polymer matrix as well as the interfacial effects due to the heterogeneity of the systems. It should be noted that, for the Carbon Black and MWCNT systems, above a critical concentration the nanocomposites undergo a transition from the insulating to the conducting state. Therefore, no charge/discharge process could be established since the charge carriers do not accumulate inside the material but rather migrate through it. Another critical factor for the valuation of the nanocomposites’ energy storage/harvesting performance is the calculation of the coefficient of energy efficiency which is defined as the ratio of the recovered to stored energy with parameters the charging voltage and time. The coefficient of energy efficiency diminishes over time for all systems. The optimum energy efficiency was noted for the nanocomposite with 1 phr Carbon Black/1 phr Fe3O4 content with coefficient (neff) values of 89.6 % at 100 V and 5 s.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Stavropoulos, Sotirios
- Σταυρόπουλος, Σωτήριος
Subjects
dc:subject × 47- Νανοδιηλεκτρικά
- Νανοσύνθετα πολυμερικά υλικά
- Αποθήκευση και ανάκτηση ηλεκτρικής ενέργειας
- Πολυλειτουργικότητα
- Αγωγιμότητα
- Διηλεκτρικές χαλαρώσεις
- Διηλεκτρική φασματοσκοπία ευρέος Φάσματος (BDS)
- Δυναμική μηχανική ανάλυση (DMA)
- Διαφορική θερμιδομετρία σάρωσης
- Δοκιμές εφελκυσμού
- Ηλεκτρονιακή μικροσκοπία σάρωσης
- Συντελεστής ενεργειακής απόδοσης
- Αλλοτροπικές μορφές άνθρακα
- Νανοσωλήνες άνθρακα
- Πολυ-στρωματικά γραφένια
- Νανοδιαμάντια
- Μαγνητίτης
- Nanodielectrics
- Polymer nanocomposites
- Energy storage and harvesting
- Multifunctionality
- Conductivity
- Dielectric relaxations
- Broadband dielectric spectroscopy (BDS)
- Dynamic mechanical analysis (DMA)
- Differential scanning calorimetry (DSC)
- Static tensile tests
- Scanning electron microscopy (SEM)
- Coefficient of energy efficiency
- Carbon allotropes
- Multiwalled carbon nanotubes (MWCNT)
- Graphene nano-platelets (GnP)
- Carbon black (CB)
- Nanodiamonds (ND)
- Magnetite
- Νανοτεχνολογία
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοϋλικά
- Μηχανική Υλικών
- Κεραμικά και Σύνθετα υλικά
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Nano-Technology
- Engineering and Technology
- Nano-materials
- Materials Engineering
- Ceramics and Composites
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59394