National and Kapodistrian University of Athens
Study of the annealing effects on the mechanical and structural properties of neutron irradiated tungsten materials with applications in fusion technology
Abstract
dc:descriptionAchieving thermonuclear fusion is a quest that, if completed, could unlock a safe, abundant, clean and sustainable source of energy, using small amounts of fuel, hydrogen isotopes. However, high temperatures and thermomechanical loads as well as high fluxes of neutrons and other high energy particles during the operation of a magnetic plasma confinement device (Tokamak) necessitate the use of materials that are resistant to high temperatures, high heat loads and radiation. Tungsten (W) and tungsten based materials are candidate materials for the interior walls of a fusion reactor (plasma facing material) due to tungsten’s many advantageous properties. While the specific grade of W to be used in future fusion reactors has yet to be determined, several methods of modifying the W microstructure - such as forging and “cold” rolling- have been proposed to decrease its relatively high ductile to brittle transition temperature. This temperature, which ranges from room temperature to several hundreds of degrees Celsius, remains the main limiting factor for its exploitation. Over the recent years, extensive research has been carried out on the effects of fusion relevant irradiations, heat fluxes and plasma interactions on the microstructure and the properties of tungsten. However, a deep understanding of the interactions between irradiation created defects and the evolution of the microstructure in high-temperature environment to this day remains unclear. This knowledge gap necessitates further research to optimize material performance, reliability and lifespan in such conditions. In the present thesis, the effects of annealing on the physical, structural and mechanical properties of neutron irradiated tungsten in fusion-relevant conditions are studied. The investigation focuses on the influence of the original microstructure on the irradiation induced defects and their subsequent evolution through annealing. Ultimately, this thesis aims to contribute to the understanding of the underlying phenomena in tungsten associated with neutron irradiation and subsequent annealing, as well as to assist in the technological advancement of plasma facing materials. To achieve this, three distinct grades of tungsten are investigated: single crystalline, forged bar, and “cold” rolled plate. The samples were irradiated in the Belgian Material Test Reactor BR2 at SCK CEN in Belgium, at the temperature of 600 °C. The single crystal sample was irradiated to a damage dose of 0.11 displacements per atom (dpa) while the two polycrystalline materials to a damage dose of 0.21 dpa. All materials were subsequently annealed, together with non-irradiated counterparts, isochronally for 24 h in the temperature range of 700 to 1550 °C. Positron Annihilation Lifetime Spectroscopy, optical and electron microscopy, X-ray diffraction, and electrical resistivity measurements are utilized to analyze the structural changes in the materials after post-irradiation annealing. Mechanical properties are evaluated using indentation and impulse excitation methods. Ιn this study the evolution of the microstructure is correlated with changes in the mechanical and elastic properties. Neutron irradiation results in the formation of mainly vacancy clusters and/or voids and dislocations in the form of loops. In addition, transmutation elements (rhenium (Re), osmium (Os) and tantalum (Ta) as well as negligible amounts of hydrogen (H) and helium (He)) are created. However, no precipitation of the transmutation products is observed after neutron irradiation. While the resulting microstructure after neutron irradiation is similar for all three grades, the increase in hardness and in electrical resistivity is significantly more pronounced for the single crystalline grade compared to the polycrystalline ones. The different response of the three grades reveals that the original microstructure has a significant influence on their neutron radiation damage resistance. In the polycrystalline grades the grain boundaries and the dislocations induced by the fabrication process act as defect sinks effectively reducing the neutron radiation damage. Regarding the post-irradiation annealing study, the single crystalline (SC) W(100) offers the baseline material for Physics understanding of irradiation induced defects and their annealing, as its structure is well defined and it is almost defect free. For the polycrystalline grades, the grain boundaries as well as the initial deformed microstructure are expected to influence the kinetics of the defects during annealing, with recrystallization and grain growth phenomena developing at some high temperature. The main annealing stages are similar for all three grades. Firstly, de-trapping of vacancy defects trapped in dislocations, impurities and grain-boundaries takes place; subsequently the vacancies diffuse and coalesce, increasing the vacancy cluster size. Dislocation recovery follows, with a broader thermal activation range for the polycrystalline samples compared to the single crystal. Simultaneous to dislocation recovery, an increase in vacancy cluster size, probably via an Ostwald ripening mechanism, occurs, followed by void dissolution which is completed alongside recrystallization for the bar and before recrystallization for the plate. After annealing at the ultimate temperature all W grades are free from all open volume defects, but the formation of Re (bcc), WRe-σ and WOs2 phases is detected. The present study enhances the understanding of the recovery stages of neutron irradiated tungsten at fusion reactor relevant temperatures for plasma facing materials. It provides a thorough investigation of the evolution of the undamaged and neutron damaged microstructure, after annealing, through the material’s properties, in a non-destructive manner. The simultaneous investigation of the single crystal and engineering grade tungsten, prior to and after irradiation offers a thorough examination of the way microstructure affects the kinetics of the defects after annealing. Information on the relative recrystallization resistance of the materials is provided by studying different W grades under the same annealing conditions. This study presents a novel approach, as the effect of neutron damage on W recrystallization behaviour has not, to the best of the author’s knowledge, been explored in existing literature. Understanding this influence is essential for designing plasma-facing components for future nuclear fusion reactors, as it informs the selection of appropriate tungsten grades for these applications. Finally a proof-of-concept level demonstration regarding in-situ annealing cycles extending the lifetime of in-vessel plasma facing components is suggested.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papadakis, Dimitrios
- Παπαδάκης, Δημήτριος
Subjects
dc:subject × 27- Ηλεκτρική αντίσταση
- Σκληρότητα
- Φασματοσκοπία εξαύλωσης ποζιτρονίου
- Τεχνική διέγερσης με παλμό
- Ανόπτηση μετά από ακτινοβόληση
- Επαναφορά
- Επανακρυστάλλωση
- Νετρονική ακτινοβόληση
- Βολφράμιο
- Τεχνολογία σύντηξης
- DC resistivity
- Vickers Hardness
- Positron annihilation lifetime spectroscopy
- Impulse excitation technique
- Post-irradiation annealing
- Neutron irradiation
- Recovery
- Recrystallization
- Indentation
- Tungsten
- Fusion technology
- Φυσική
- Φυσικές Επιστήμες
- Φυσική συμπυκνωμένης ύλης
- Physical Sciences
- Natural Sciences
- Condensed Matter Physics
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59400