Back to search

University of Patras

Σύνθεση καινοτόμων υλικών και ανάπτυξη νέων μεθόδων για τη συντήρηση ιστορικών μνημείων

Abstract

dc:description

Cultural heritage characterizes the particularity of a society. It is the inheritance of intangible and material characteristics from previous generations, which are preserved in the present and granted to future generations. It is unique and irreplaceable for each society, which makes modern culture responsible for its preservation. Most historical monuments are mainly made of marble and limestone. Over time, the effect of environmental conditions (acid rain, humidity, wind and temperature changes), combined with the structure of the material, as well as with human interventions, undergo extensive wear and tear. The salts that form inside the pores of the building materials, as well as the growth of microorganisms on their surfaces, are aggravating factors for them. Therefore, it is considered necessary to develop methods with the aim of protecting and restoring the deterioration of the building materials of the historical monuments. The first part of the work includes the synthesis of calcium carbonate suspensions (CaCO3) and the study of their stability over time. For this purpose, precipitation of calcium carbonate took place, under specific experimental conditions and concentrations of aqueous solutions of calcium chloride (CaCl2) and dimethyl carbonate (DMC). The resulting solids were characterized by the following physicochemical methods: X-ray diffraction (XRD), measurement of the specific surface area by nitrogen sorption (BET), thermogravimetric analysis (TGA), infrared absorption spectroscopy (IR) and Raman spectroscopy (microRaman Spectroscopy). The morphological characterization was done with the help of scanning electron microscopy (SEM). Synthesis of crystalline particles (vaterite, calcite and aragonite) with an average diameter of a few micrometers was achieved, but also of amorphous calcium carbonate, the crystallites of which had an average diameter of 750nm. The exposure of the suspensions of the preparations to ultrasonic (37kHz, 2 minutes) favored the disaggregation of the particles, and the stabilization of the respective suspensions for time periods exceeding 100 hours. In addition, the effect of the presence of two surfactants, an anionic (sodium sodecyl sulfate, SDS) and a cationic (cetrimonium bromide, CTAB) at various concentrations on the calcium carbonate precipitate suspensions, was studied. The particle size distribution and the ζ potential values were studied with the aim of investigating the stability of the suspensions as a function of time. In the presence of the surfactant CTAB, a decrease in the stability of the suspensions was observed with increasing its concentration. Increasing the concentration of SDS surfactant, after 100 hours, an increase in aggregation was observed. The second part of the work includes the synthesis of suspensions of silicon oxide nanoparticles (silica / SiO2) which have a molecular structural affinity with the limestone building materials of the monuments. The synthesis was carried out by the hydrolysis of tetraethyl orthosilicate (TEOS) at a temperature of 25°C, in a TEOS concentration of 0.29M under constant stirring. The stability of the suspensions at different composition conditions was studied. The resulting solids were characterized by physicochemical methods: X-ray diffraction (XRD), measurement of the specific surface area by natural nitrogen sorption (BET) and thermogravimetric analysis (TGA). The effect of the presence of the surfactants sodium dodecyl sulfate (SDS) and cetrimonium bromide (CTAB) of different concentrations on the silica suspensions, which were prepared, was studied. Finally, the size distribution of the particles as well as the values of the ζ potential were studied, in order to investigate the stability of the suspensions as a function of time. The synthesis of amorphous silica nanoparticles with an average diameter of 200nm was observed, while the use of ultrasonic did not lead to a smaller average particle size of the suspensions. In addition, the use of SDS surfactant led to the synthesis of more stable suspensions. Both the particle size and the ζ potential of the suspensions remained constant over a period of one month. The third part of the work includes the preparation of suspensions of calcium carbonate, silica as well as two composite materials, of different composition in terms of calcium carbonate and silica. The materials are: composite 1 (ΣY1): 69% CaCO3 / 31% SiO2 and composite (ΣY2): 97% CaCO3 / 3% SiO2. This was followed by the deposition of amorphous calcium carbonate, amorphous silica, ΣY1 and ΣY2 on substrates of Dionysus marble and three mortars. The three mortars studied differed in terms of calcium carbonate and silica composition, as well as the presence or absence of aluminosilicate compounds and were as follows: 1: 39% SiO2 (and aluminosilicate compounds) / 61% CaCO3, 2: 50% SiO2 / 50% CaCO3 and 3: 57% SiO2 / 43% CaCO3. The Dionysus marble was pulverized in an agate ball mill, while the three mortars were lightly pulverized. The resulting solids were characterized by measuring their specific surface area and pore volume by nitrogen sorption (BET), while morphological characterization was performed by scanning electron microscopy (SEM). Next, the dissolution of the marble and the three mortars as well as all the solid materials prepared, at an unsaturation of 0.89 in terms of calcite, was studied in order to study the dissolution rates of the materials. By comparing the dissolution rates of marble and mortars with the dissolution rates of marble and mortars with the depositions of the materials that took place, conclusions are drawn as to the inhibition of the dissolution rate, depending on the deposition material. Finally, the dissolution mechanism of the Dionysos marble was studied, by performing dissolution experiments at different undersaturations.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Pavlakou, Efstathia
  • Παυλάκου, Ευσταθία

Subjects

dc:subject × 13

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/59441

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Pavlakou, Efstathia; Παυλάκου, Ευσταθία. Σύνθεση καινοτόμων υλικών και ανάπτυξη νέων μεθόδων για τη συντήρηση ιστορικών μνημείων. University of Patras, 2025. http://hdl.handle.net/10442/hedi/59441