Back to search

Aristotle University Of Thessaloniki (AUTH)

Χωρικές ανομοιομορφίες σε συσσωρευτές ιόντων λιθίου ηλεκτροκίνητων οχημάτων

Abstract

dc:description

The study and computational simulation of lithium-ion batteries heavily relies on the P2D (pseudo-2D) model, which captures physicochemical phenomena along the electrode thickness direction and within the active material particle. In other words, it assumes that variations in electrochemical and thermal quantities in other directions are negligible, significantly simplifying the mathematical problem without substantially compromising the model’s accuracy for most applications. This work investigates cases where such variations (inhomogeneities) may be significant, particularly in studies related to optimal design, cooling, and the lifetime of lithium-ion batteries, especially in electric vehicle applications. To this end, a coupled 3D electrochemical, thermal, and aging model is employed, parameterized using laboratory measurements. The model is then used to examine specific practical application problems involving inhomogeneities across different spatial scales. At the electrode-pair scale, unequal sizes between the anode and cathode can induce undesired effects, such as lithium plating at the edges. The results show that if the cathode area is larger, lithium plating may occur even under normal operating conditions. The presence of an anode overhang can mitigate this risk, however, it may introduce inhomogeneities that could lead to lithium plating during cycling. The absence of electrolyte at the edges due to insulation reduces these inhomogeneities and consequently the associated risks. Moreover, the anode overhang can distort coulombic efficiency measurements, due to lithium diffusion between the active and passive regions of the anode. By employing the electrochemical model, this work provides the first analysis of how the anode’s OCP, geometric parameters such as the overhang size, and measurement protocols like the charge-discharge C-rate influence the diffusion rate and hence the measurement values. At the cell scale, the effects of macroscopic cell design on aging are examined. Four different designs were considered to assess the impact of tabs position, tabs thickness, and cell aspect ratio on aging. The results indicate that aging due to excessive SEI (solid electrolyte interphase) formation follows the pattern of electrical and thermal inhomogeneities. In contrast, inhomogeneous aging due to lithium plating behaves differently, as it is governed by a complex interplay between current density, temperature, plating overpotential, and the plating reaction rate. At the battery module scale, inhomogeneous cell aging caused by inherently uneven heating/cooling from the thermal management system is analyzed. The results reveal significant inhomogeneities both within each cell and between cells, which can lead to non-negligible deviations from the expected battery lifespan. By employing advanced thermal management techniques, these inhomogeneities and the overall module aging can be substantially reduced. In conclusion, the multidimensional modeling approach can indeed reveal and address practical design challenges in modern and future batteries for electric vehicle applications.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kanatas, Apostolos
  • Κανάτας, Απόστολος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/59466

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kanatas, Apostolos; Κανάτας, Απόστολος. Χωρικές ανομοιομορφίες σε συσσωρευτές ιόντων λιθίου ηλεκτροκίνητων οχημάτων. Aristotle University Of Thessaloniki (AUTH), 2025. http://hdl.handle.net/10442/hedi/59466