Back to search

National Technical University of Athens (NTUA)

Ανάπτυξη εκτύπωσης μεταλλικών και άλλων υλικών με χρήση laser για την κατασκευή εύκαμπτων οργανικών φωτοβολταϊκών

Abstract

dc:description

This work focuses on the study and application of the Laser-Induced Forward Transfer (LIFT) technique for the fabrication of flexible electronic devices. Through its chapters, the research covers theoretical foundations, experimental implementation, and results in practical applications. The first chapter introduces the significance of the LIFT technique in developing flexible electronic devices. The research objectives are presented, highlighting the challenges in the industrial production of organic photovoltaics (OPVs) and organic thin-film transistors (OTFTs), as well as the need for efficient printing techniques. The second chapter delves into the theory underlying the LIFT technique, with emphasis on the physics of droplet impact and spreading, energy absorption in materials, heat transfer via thermal conductivity, and the characteristics of organic photovoltaics. The chapter outlines key concepts governing sintering and laser-material interaction. The third chapter describes the materials and methods used. Metallic nanoparticle inks (such as silver and copper), flexible substrates (PET, Kapton), and two-dimensional materials are analyzed in detail. The donor fabrication process and the LIFT technique are explained, along with the characterization methods for materials and printed structures. The fourth chapter focuses on the experimental application of the LIFT technique. An advanced laser printing setup equipped with an Nd:YAG source (532 nm) and a galvanometric scanner was employed. The experiments included the printing of individual droplets and lines, laser-induced sintering of nanoparticles, and the analysis of the inks’ physicochemical and electrical properties. The fifth chapter highlights practical applications of the LIFT technique, such as the fabrication of electrodes for OPVs and OTFTs. The results demonstrate efficiencies above 9% for OPVs and comparable electrical properties to conventional methods. Additionally, the printing of lines with heights below 500 nm and widths under 90 μm is identified as a crucial feature for high-precision applications. The sixth chapter summarizes the findings, emphasizing the potential of the LIFT technique for industrial applications in flexible electronics. The capabilities of this technology include high flexibility and efficient use of advanced materials, making it ideal for the development of innovative electronic devices.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Andritsos, Konstantinos
  • Ανδρίτσος, Κωνσταντίνος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/59483

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Andritsos, Konstantinos; Ανδρίτσος, Κωνσταντίνος. Ανάπτυξη εκτύπωσης μεταλλικών και άλλων υλικών με χρήση laser για την κατασκευή εύκαμπτων οργανικών φωτοβολταϊκών. National Technical University of Athens (NTUA), 2025. http://hdl.handle.net/10442/hedi/59483