University of Ioannina
Development of heterostructured catalytic-suboxides with flame-spray-pyrolysis technology
Abstract
dc:descriptionCopper-based nanomaterials have gained significant attention due to their enhanced performance in photocatalytic hydrogen (H2) production and carbon dioxide (CO2) reduction. In this PhD thesis we focus on the synthesis, structural optimization and photocatalytic application of copper-based nanomaterials, mainly Cu2O and CuO, synthesized using advanced Flame Spray Pyrolysis (FSP) processes. Given Cu2O’s high theoretical photocatalytic efficiency and earth-abundant nature, its practical use is hindered by severe photocorrosion and instability under illumination. The primary aim of this research is to address these limitations through heterojunction engineering, controlled phase transformation, and carbon-based hybridization, leading to enhanced photocatalytic performance and durability. To achieve this a series of Cu-based materials were synthesized using various FSP configurations, including single-nozzle FSP (SN-FSP), double-nozzle FSP (DN-FSP) and Anoxic-FSP (A-FSP) allowing precise control over the oxidation state, morphology and heterointerface design. A-FSP process was developed and optimized throughout this PhD thesis as a modified flame-based synthesis technique to produce reduced-phase metal oxides, metallic nanoparticles and synthesize nanomaterials with controlled oxygen vacancy populations. Unlike conventional FSP, A-FSP operates under an oxygen-deficient flame environment, achieved by controlling the oxidizer ratio using a mixture of oxygen/methane as a dispersion gas or by controlling the flame’s environment through the introduction of reducing or inert gases like methane or nitrogen, which suppresses full oxidation and promotes the formation of sub-stoichiometric phases. Utilizing both SN- and DN-FSP various SrTiO3 structures were fabricated with controlled La doping and CuO surface-integration. The resulting heterojunctions demonstrated significantly enhanced photocatalytic activity, particularly under ultraviolet (UV) irradiation, with notable increases in both H2 and CH4 yields compared to pristine SrTiO3.Using A-FSP we demonstrate the scalable synthesis of phase-pure Cu2O, CuO, and mixed-phase systems, and reveal critical insights into the thermal, structural, and redox stability of Cu-based oxides. One of the major findings is the controlled transformation from CuO to Cu2O and metallic Cu0 phases, which was tuned through annealing and FSP atmosphere modifications. Recognizing the inherent instability of Cu₂O due to self-photooxidation and self-reduction pathways, in this PhD thesis we have employed in-situ analytical techniques to quantify the extent of Cu-leaching during illumination. Using a combination of Anodic Stripping Voltammetry (ASV) and spectroscopic analysis, it was demonstrated that Cu2O nanoparticles undergo progressive degradation in aqueous media under light exposure, leading to the release of Cu²⁺ into the reaction environment. The rate and extent of this release were found to be directly influenced by the nature of the catalyst interface and the presence of stabilizing factors such as the use of co-catalyst (Ag0 NPs) and the use of a hole scavenger (2-propanol). The results provided clear mechanistic insight into the dominant photocorrosion pathway, primarily hole-induced oxidation of Cu+ to Cu2+, and highlighted the critical role of interfacial engineering in mitigating structural breakdown. Additionally, A-FSP facilitated the development of non-graphitized carbon (nGC)–Cu2O/Cu0 nanohybrids, essential for enhancing the structural stability and photocatalytic performance of Cu-based catalysts. The integration of nGC with Cu2O/Cu0 was found to significantly suppress photocorrosion by facilitating efficient charge separation and electron transport, while simultaneously protecting Cu2O and Cu0 phases from oxidative degradation. The findings presented in this thesis demonstrate that nanohybrids produced via A-FSP exhibit significantly enhanced photoelectrochemical performance and long-term operational stability, confirming the method’s potential for scalable fabrication of non-stoichiometric, high-efficiency metal oxide catalysts. Moreover, by utilizing methane as a reducing agent in both axial and radial A-FSP configurations, the oxygen vacancy (Vo) concentration and crystal structure of SrTiO3 could be finely tuned. The introduction of Vo’s was found to influence the material’s electronic structure, leading to improved light absorption and efficient separation of photogenerated charge carriers. Photoelectrochemical analyses, including Mott-Schottky and Electrochemical Impedance Spectroscopy (EIS), revealed that oxygen-deficient SrTiO3-x samples possessed higher carrier densities, lower charge transfer resistance, and reduced recombination rates compared to their stoichiometric counterparts. Overall, the present PhD research provides new insights into the field of FSP-made metastable phases and hybrid nanocomposites. This study provides a further understanding for overcoming the intrinsic instability of copper nanoparticles via rational design of nanostructured heterojunctions and flame-based synthesis, offering scalable, high-performance photocatalysts for hydrogen production and CO2 reduction.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Zindrou, Areti-Konstantina
- Ζήνδρου, Αρετή-Κωνσταντίνα
Subjects
dc:subject × 26- Πυρόλυση ψεκασμού φλόγας (FSP)
- Νανοσωματίδια χαλκού
- Υποοξείδια
- Περοβσκίτες Sr - Ti
- Κενές θέσεις οξυγόνου
- Παραγωγή υδρογόνου
- Αναγωγή CO₂
- Flame spray pyrolysis (FSP)
- Copper nanoparticles
- Suboxides
- Perovskites Sr -Ti
- Oxygen vacancies
- Hydrogen production
- CO₂ Reduction
- Φυσική
- Φυσικές Επιστήμες
- Εφαρμοσμένη φυσική
- Νανοτεχνολογία
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοεπιστήμη και Νανοτεχνολογία
- Physical Sciences
- Natural Sciences
- Applied Physics
- Nano-Technology
- Engineering and Technology
- Nanoscience and Nanotechnology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59499