Back to search

University of Ioannina

Επίδραση της μοριακής αρχιτεκτονικής στη δυναμική μακρομορίων

Abstract

dc:description

The study of polymer flow and dynamics under confinement has attracted significant attention due to its relevance in developing materials with enhanced properties for advanced applications, including oil recovery, catalytic interfaces, and the separation of polymer blends. When polymer chains come into contact with the entrance of a nanopore, the capillary force drag them inside, despite the entropic penalty associated with confinement. Under such conditions, interactions of the chains with the pore walls can alter their dynamics, affecting both the ow and the characteristic relaxation times of the polymers. This dissertation investigates how polymer microstructure and architecture affect their dynamics in different contexts: (i) in the bulk, (ii) under cylindrical confinement as well as (iii) during imbibition into cylindrical alumina nanopores (AAO), and (iv) during adsorption onto the pore walls. Additionally, the possibility of separating homogeneous binary blends composed of components differing in (v) microstructure or (vi) topology is examined. The studied systems are based on polyisoprene and vary in microstructure, chain length (N), and architecture (linear, star-shaped, or bottlebrush). In the star-shaped and bottlebrush cases, the microstructure is predominantly cis-1,4. The first part focuses on the effect of microstructure on the thermodynamics, viscoelastic properties, and dynamics of polyisoprenes in the bulk. A series of well-defined monodisperse samples (Ð ∼ 1), span various microstructures: cis-1,4, trans-1,4, 3,4, and 1,2. Synthesized via anionic polymerization by Dr. N. Patelis and Dr. K. Ntetsikas in the laboratory of Prof. N. Hadjichristidis, King Abdullah University of Science and Technology in Saudi Arabia. The glass transition temperature (Tg) decreases linearly with the 1,4-unit content as Tg[K] = (289±4)− 0.9 ×w_1,4%, and increases quadratically with the 3,4-unit content as Tg = T0% g +(w_3,4%/50)^2 [K]. The increment in specific heat at Tg · ∆cp remains approximately constant. At given T, the zero-shear viscosity follows the scaling law η0 = η0% × (w_1,4%)^u, with u = 5.4 ±0.3. The dielectric strength of the β- and α-processes increases with the 3,4 content, while that of the longest normal mode (NM) decreases sharply. The component of the dipole moment along the chain backbone follows: µ_cis-1,4 > µ_trans-1,4 > µ_1,2 > µ_3,4 ≈ 0. Finally, the separation of blends differing in microstructure is demonstrated via imbibition into cylindrical nanopores. In the second part, the imbibition kinetics of star-shaped cis-1,4- polyisoprenes into alumina nanopores is studied using in situ nanodielectric spectroscopy (nDS), as a function of architecture (linear vs. star-shaped), pore diameter (d), molar mass (Mn), and temperature (T). The synthesis of the polymers was carried out by Assoc. Prof. G. Sakellariou, Department of Chemistry, National Kapodistrian University of Athens. Imbibition occurs via an ultra-slow adsorption mechanism, about two orders of magnitude slower than for linear counterparts. The characteristic adsorption timescales (τ_ads, on the order of 10^6 s) are among the longest ever reported for polymers at temperatures T ≫ Tg. In the third part, the kinetics of imbibition and adsorption in blends of linear and star-shaped cis-1,4-polyisoprenes is analyzed via nDS. The kinetics are studied through the evolution of the dielectric strength of the NM, using nDS. By utilizing the different imbibition speed between the two architectures, it was shown that the polymers with the lowest zero shear viscosity enter the pores first. In most blends, the adsorption of the components is slower than that of their respective homopolymers. An exception is found in blends of entangled stars mixed with short linear chains, where the latter act as a diluent, accelerating the adsorption of the star-shaped component. This phenomenon gives rise to what is known as "topology sorting" i.e., separation of the blend components in the absence of solvent. A simple relation τ_ads ∼ 10×t_peak is established for both linear and star-shaped chains. This implies that the imbibition timescale t_peak governs the adsorption process and enables prediction of τads for high-molar-mass polymers based on faster imbibition kinetics. The fourth part focuses on bottlebrush polymers. Using in situ nanodielectric spectroscopy (nDS), the imbibition kinetics of cis-1,4-polyfarnesene (PF) is studied. The synthesis of the PFs was carried out by Dr. M. Meier-Merziger and Prof. H. Frey, at the Johannes Gutenberg-University in Mainz (Germany). Although the imbibition follows a t1/2 dependence (Lucas-Washburn), the effective viscosity is significantly higher than in the bulk even for 2Rg < d (where Rg is the radius of gyration and d is the pore diameter). Adsorption times are several orders of magnitude slower than all molecular processes, including the segmental mode and the NM. Compared to linear polymers, bottlebrushes show even slower adsorption, with weak dependence on three parameters:• molar mass: τads ∼ (N_bb)1.2±0.1, where N_bb is the number of backbone repeat units • pore size: log(τads) ∼ ξ/d with ξ = 20nm, • temperature (activation energy): Eact ∼ 16 ±2kJ/mol. These trends are attributed to an increased number of contacts between side chains and the pore walls, which enhances adsorption and suppresses dynamics. Topology sorting is also demonstrated for linear/bottlebrush blends (PI/PF). In the final part, the non-equilibrium dynamics of cis-1,4-polyisoprenes (linear and star-shaped, f = 2,6,64) under confinement is examined using two thermal protocols: (I) quasi-static cooling, and (II) fast cooling followed by annealing. Both yield the same equilibrium time teq, determined from the relations log_10(f_max) = C1 − k · log_10(t) and log_10(f_max) = C2 + λ·log_10(β). A critical temperature Tc is identified- defined as the point where both k → 0 and λ → 0, below which non-equilibrium effects emerge. The value of Tc depends on the confinement degree, 2Rg/d, and the molecular architecture. Equilibrium is only recovered for 2Rg/d ∼ 0.02, i.e., when the pore diameter is much larger than the chain size. Star-shaped polymers require longer equilibration times due to their higher tendency for adsorption. Both protocols lead to an increase in dielectric strength for both segmental and NM processes. The increase exceeds what is expected from densification alone, suggesting enhanced orientation correlations of sub-chain dipoles. In summary, this dissertation explores how microstructure and topology affect the dynamics, ow, and adsorption mechanisms of polymers confined in nanopores. By examining systems with well-defined molar mass and different architectures, it analyzes the characteristic timescales of imbibition and adsorption, along with the conditions under which thermodynamic equilibrium is established or breaks-down. Special attention is given to the phenomenon of "topology sorting”, driven by differences in imbibition and adsorption kinetics. These findings deepen our understanding of polymer dynamics under confinement and o er insights relevant to nanoscale applications, such as the optimization of polymer mixtures separation methods, energy storage, the development of functional materials for sensors, coatings, etc

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kardasis, Panagiotis
  • Καρδάσης, Παναγιώτης

Subjects

dc:subject × 32

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/59551

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kardasis, Panagiotis; Καρδάσης, Παναγιώτης. Επίδραση της μοριακής αρχιτεκτονικής στη δυναμική μακρομορίων. University of Ioannina, 2025. http://hdl.handle.net/10442/hedi/59551