National Technical University of Athens (NTUA)
Power system static and dynamic state estimation methods using heterogeneous measurements
Abstract
dc:descriptionPower system state estimation (SE) constitutes an essential function of energy management systems (EMS), enabling operators to maintain a comprehensive awareness of system operating conditions through available field measurements. In the modern transmission sector, two primary measurement technologies are employed, namely the supervisory control and data acquisition (SCADA) system and the wide area monitoring systems (WAMS). The benefits of augmenting conventional SCADA-based SE algorithms with synchrophasor measurements from phasor measurement units (PMUs) – the measurement devices within WAMS – are widely recognized, resulting in numerous methodologies being proposed for hybrid state estimation (HSE), aimed at optimally integrating SCADA and PMU data. Under this premise, this thesis introduces several contributions to the research domain of HSE. Initially, fundamental concepts of static and dynamic SE are elaborated from both mathematical and practical implementation perspectives, followed by an introduction to the principles of HSE. Subsequently, key challenges associated with HSE implementations are identified, accompanied by a comprehensive literature review focusing on novel static and dynamic HSE methods designed to overcome these challenges. Furthermore, a classification of existing methods is proposed based on their scope and underlying mathematical formulations. Subsequently, the main contributions of the thesis are detailed. Firstly, a weighted least squares (WLS)-based static HSE formulation is developed, separately handling SCADA and WAMS measurements. The principal advantages of the proposed method include its modular design and practical applicability, making it particularly suitable for PMU integration into existing SE software through minimal modifications. Moreover, considering the widespread adoption of high-voltage direct current (HVDC) transmission technology, particularly for renewable energy integration and submarine interconnections, modern state estimators must accommodate relevant component models. Accordingly, a model suitable for current source converter (CSC)-HVDC links in static HSE implementations is proposed and validated via numerical simulations involving both SCADA and PMU measurements on the AC side, along with diverse combinations of DC-side measurements. Additionally, the thesis investigates the inclusion of current injection phasors from PMUs in static HSE algorithms, examining how various current measurement configurations – whether flows or injections – influence HSE performance, a topic inadequately addressed in prior literature. Recognizing the increasing complexity and stochastic behavior of contemporary power systems, transitioning toward advanced SE algorithms capable of providing enhanced system visibility and situational awareness becomes imperative. In response, this thesis proposes a hybrid forecasting-aided state estimation (FASE) approach leveraging an extended Kalman filter (EKF) framework. The method supplements existing static state estimators by incorporating additional information derived from the temporal evolution of system states through multi-sensor data fusion, employing a transition model that combines dense, real-time PMU measurements with forecasted state estimates. To address synchronization discrepancies between SCADA and PMU data, a post-processing correction step based on the modified Bryson-Frazier fixed-interval smoothing algorithm is implemented. In the final two chapters, algorithms dedicated to detecting and suppressing bad data within the context of the proposed HSE approaches are formulated. Additionally, practical aspects of the research are demonstrated using a laboratory-scale experimental setup that integrates both commercial and low-cost PMUs with a digital real-time power system simulator, thereby enabling comprehensive testing and validation of synchrophasor-based monitoring and control algorithms.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Darmis, Orestis
- Δαρμής, Ορέστης
Subjects
dc:subject × 26- Ανίχνευση και απαλοιφή εσφαλμένων μετρήσεων
- Απομακρυσμένες τερματικές μονάδες
- Εκτίμηση κατάστασης με περιορισμούς ισότητας
- Εκτίμηση κατάστασης υποστηριζόμενη από πρόβλεψη
- Επεκτεταμένο φίλτρο Kalman
- Μέθοδος σταθμισμένων ελαχίστων τετραγώνων
- Μονάδες μέτρησης φασιθετών
- Μοντέλο μετάβασης καταστάσεων
- Συστήματα εποπτείας ευρείας περιοχής
- Υβριδική εκτίμηση κατάστασης
- Bad data analysis
- Remote terminal unit
- Equality-constrained state estimation
- Forecasting-aided state estimation
- Extended Kalman filter
- Weighted least squares
- Phasor measurement unit
- State transition model
- Wide area monitoring systems
- Hybrid state estimation
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59570