National Technical University of Athens (NTUA)
Υπολογιστική μοντελοποίηση πειραματικής θερμοϋδραυλικής διάταξης προσομοίωσης διαύλου ψύξεως πυρηνικού αντιδραστήρα με χρήση τεχνολογικού κώδικα: πρόβλεψη ταχύτητας υγρού μετώπου επανάψυξης και δραστικής θερμοκρασίας ξήρανσης
Abstract
dc:descriptionThis PhD Thesis focused on the theoretical and computational study of heat transfer in a twophase water steam mixture under the special rewetting conditions of an overheated cylindricalrod surrounded by air and / or dry steam. The study was based on available experimental results. The results had been obtained from rewetting simulation experiments. The experimentswere conducted on a simulated nuclear fuel rod under water bottom flooding conditions with emphasis on low flowrates and atmospheric pressure. The experimental results were collected using a thermal hydraulic research set-up available at the Nuclear Engineering Laboratory ofthe National Technical University of Athens. This set-up could simulate the rewetting of the equivalent cooling channel of nuclear reactor core (i.e. a single rod channel). This is the only such set-up existing and operating in Greece; the set-up is similar to (really few today, 2025)others that exist internationally and that have been reported in several publications. The results considered within the present Thesis are of significant interest to the relevant scientific community since the experiments were conducted in conditions, which could effectively resemble the rewetting processes induced by passive Emergency Core Cooling Systems. During the results processing, relevant theoretical rewetting models were satisfactory tested /verified for the low flowrates low pressure conditions examined. The models were of the formu-1(θ), where u-1 is the inverse rewetting velocity (i.e. the inverse velocity of the wet front propagation) and θ is a dimensionless temperature, which is a linear or a non-linear function ofthe temperature on the wall of the rod before rewetting, the subcooling temperature and the effective dry out temperature. The effective dry out temperature could be roughly considered as the temperature at the interface between the two-phase water and the dry situation. Empirical optimizations were suggested and proven for the models examined. It is believed that these optimizations account for unknown frictions during the experiments. Despite the simple form of these suggestions, there is no mention of them in previous references. Further,the agreement of the current version of the RELAP thermal hydraulic engineering code with the experimental data was tested. To this end, the experimental set-up was modelled using RELAP, as is the prerequisite for any commercial nuclear reactor. The findings verify the modified theoretical models as well as the general, largely qualitative, agreement of the RELAP simulations with the conducted experiments. The main problem in this negotiation concerns the unknown effective dry-out temperature. This temperature should be known satisfactorily, in order for the efficient application of the modified models. Α method was developed for the estimation of this particular temperature. This method is new and nonexistentin references. The estimation of this temperature is the only method of knowing itsrange, since it is extremely difficult or even impossible to measure it.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Poulopoulou, Ilektra
- Πουλοπούλου, Ηλέκτρα
Subjects
dc:subject × 18- Επανάψυξη με πλημμυρισμό
- Πειράματα επανάψυξης
- Ταχύτητα υγρού μετώπου
- Γραμμική μοντελοποίηση επανάψυξης
- Μη γραμμική μοντελοποίηση επανάψυξης
- Προσομοιώσεις RELAP5
- Bottom flooding
- Rewetting experiments
- Quench (wet) front velocity
- Rewetting linear modelling
- Rewetting non linear modelling
- RELAP5 simulations
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Πυρηνική ενέργεια και Μηχανική
- Mechanical Engineering
- Engineering and Technology
- Nuclear Energy and Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59635