Abstract
dc:descriptionIn the present PhD thesis, extensive experimental work was performed to study: (a) the parameters which influence the efficiency and quality of remote robotic hydroerosion (a precise form of robotic hydroblasting that takes advantage of remote robotic technology and uses sensor feedback to better control the quality and quantity of concrete removal) for removing defective concrete, (b) the flexural strength of 6 different types of repair mortars/concretes, (c) the water permeability of the above 6 types of repair materials and (d) the parameters which influence the adhesive strength of patch repairs. In order to evaluate the efficiency and quality of remote robotic hydroerosion, 4 sets of parameters (concrete, pressure generation unit, material removal unit and nozzle parameters) were investigated using 7 series of tests. The flexural behaviour of the 6 different types of repair materials was investigated by performing 160 4-point flexural tests on unrepaired and repaired beam specimens with dimensions of 100 x 100 x 500 mm3. The water permeability of the above 6 different types of repair materials was investigated by using the ISAT and absorption by immersion tests on 100 mm cube specimens. Moreover, 4 parameters (type of substrate surface, mechanical strength of substrate, type of repair material and use of bonding/agent primer), which influence the mode of failure and value of the adhesive strength of patch repairs were investigated by performing 300 pull-off tests. Finally, as part of the experimental work, laser interferometry was used to measure and characterise the roughness of concrete substrates prior to repair. Results obtained using the above method proved the ability of remote robotic hydroerosion to produce surfaces with higher roughness values which in turn promote the adhesive strength between the concrete substrate and the repair material.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2005
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Grigoriadis, Konstantinos
- Γρηγοριάδης, Κωνσταντίνος
Subjects
dc:subject × 19- Επισκευή σκυροδέματος
- Τηλεχειριζόμενη ρομποτική υδροδιάβρωση
- Τραχύτητα επιφάνειας υποστρώματος
- Συμβολομετρία λέιζερ
- Παράμετροι τραχύτητας σε δυο διαστάσεις
- Δοκιμή εξόλκευσης (pull off test)
- Συνάφεια μεταξύ υποστρώματος και υλικού επισκευής
- Concrete patch repair
- Remote robotic hydroerosion
- Substrate surface roughness
- Laser interferometry
- Two dimensional roughness parameters
- Pull off test
- Adhesive strength between substrate and repair material
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Πολιτική μηχανική
- Civil Engineering
- Engineering and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59726