Aristotle University Of Thessaloniki (AUTH)
Σχεδίαση και υλοποίηση επιφανειών με τεχνητές ηλεκτρικές και μαγνητικές ιδιότητες για εφαρμογές τηλεπικοινωνιών και διάδοσης ηλεκτρομαγνητικού κύματος
Abstract
dc:descriptionThe emerging role of metasurfaces and intelligent reconfigurable surfaces (IRSs) introduce new challenges in their design, analysis, and implementation. This dissertation focuses on the development of semi-analytical and numerical techniques for the analysis and design of metasurfaces and reconfigurable reflective surfaces, with applications in next-generation 6G wireless networks. An important part of this work also involves the design, fabrication, and experimental characterization of ultra-thin, conformal metasurface absorbers. Therefore, the thesis is structured around three main parts: a) the development of a semi-analytical scattering model for intelligent reflective surfaces, b) the design and experimental evaluation of absorbing metasurfaces, and c) the computational analysis of metasurfaces using the finite element method (FEM). In the second chapter, a semi-analytical free-space path-loss model based on the physical optics (PO) approximation is developed to simulate the scattering from intelligent reflective surfaces, considering both near-field and far-field regimes. Emphasis is given on the accurate estimation of the received power at the receiver load via the reflective surface. A comprehensive review of existing models in the literature is first presented, highlighting their advantages and limitations. Many of the most prominent models rely on simplifying assumptions—particularly in modeling the scattering behavior of unit cells—and frequently neglect polarization effects, which can significantly influence electromagnetic link performance.The proposed model addresses these limitations by rigorously incorporating all key elements of the wireless communication link, aiming for high accuracy in received power estimation. It employs physical optics principles and leverages the concept of the complex radar cross section (CRCS) to calculate the scattered power from individual unit cells. The CRCS captures the full three-dimensional scattering behavior, including amplitude, phase, and polarization characteristics. The final model is derived from the radar equation and explicitly includes all critical parameters: transmitter and receiver antenna characteristics, propagation distances, and unit cell scattering properties. A novel contribution of the model is the inclusion of the antenna polarization state of the transmitter, receiver, and scattered field—an aspect that significantly affects the received signal power.Additionally, a reconfigurable unit cell based on a varactor diode is designed for reflective metasurfaces. Using Floquet theory, several periodic configurations are synthesized to achieve both in-plane and out-of-plane anomalous reflection—the latter being rarely explored in existing literature. These designs serve to validate the semi-analytical path-loss model, demonstrating its superiority over existing approaches, particularly in scenarios where polarization plays a critical role. The model is also employed to predict the performance of a fabricated beam-splitting metasurface and is validated against experimental measurements.In the third chapter, the design, fabrication, and experimental validation of ultra-thin, flexible metasurface absorbers operating in the X-band (8–12 GHz) are presented. The goal is to develop two periodic absorbing metasurfaces on a thin substrate (300 μm) capable of conforming to curved surfaces. The design is particularly challenging due to substrate constraints and the stringent requirements for wideband absorption, low profile, lightweight, and mechanical flexibility. Additionally, polarization insensitivity is required for practical operation. The novelty of this work lies in achieving a combination of these functional characteristics within an exceptionally low substrate thickness—an approach rarely demonstrated in the existing literature. Following a review of absorber types, absorption mechanisms, and enhancement techniques, a narrowband absorber is first designed using uniform square metallic patches on a grounded substrate. Then, this is extended to a broadband design employing non-uniform patches, while preserving the low-profile structure. Structural symmetry is enforced to ensure polarization-insensitive performance. An evolutionary optimization algorithm is employed to fine-tune the geometric parameters and maximize absorption over the target frequency range.The two absorber designs are finally implemented on a composite Carbon Fiber Reinforced Polymer (CFRP) substrate, a material of great interest for UAV applications due to its excellent mechanical properties—including high strength-to-weight ratio, stiffness, corrosion resistance, and thermal stability. However, its electromagnetic behavior is challenging to characterize and exploit. Special attention is given to the electromagnetic characterization of CFRP, which is a non-trivial but essential aspect of the absorber design. All components and final prototypes are experimentally evaluated in both planar and conformal configurations. In the fourth chapter, a metasurface modeling and design framework based on the Finite Element Method (FEM) is developed. The large number and geometric complexity of metasurface unit cells lead to computationally intensive problems with a prohibitively high number of degrees of freedom. To overcome this, a homogenization technique is introduced via a zero-thickness sheet boundary condition. Since the goal is to model metasurfaces with bianisotropic behavior, the Generalized Sheet Transition Condition (GSTC) is incorporated into the FEM framework. The GSTC provides a rigorous equivalent representation of the metasurface through surface susceptibility tensors. These four tensors account for electric and magnetic anisotropy, as well as magnetoelectric and electromagnetic coupling, enabling the modeling of bianisotropic responses.The boundary condition is implemented in a two-dimensional domain using all three components of the electric field. A mixed finite element formulation—using both edge and nodal elements—is applied to the total electric field, allowing accurate representation of field discontinuities across the metasurface interface. The resulting computational tool enables robust modeling and design of anisotropic and bianisotropic metasurfaces. The fifth and final chapter summarizes the main conclusions of the dissertation and outlines potential directions for future research based on the findings presented.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ntokos, Konstantinos
- Ντόκος, Κωνσταντίνος
Subjects
dc:subject × 20- Μεταϋλικά και μεταεπιφάνειες
- Μέθοδος των πεπερασμένων στοιχείων
- Αναδιαμορφώσιμες έξυπνες επιφάνειες
- Μιγαδική διατομής σκέδαση radar
- Μοντέλο απώλειας διαδρομής
- Ανθρακονήμα
- Ηλεκτρομαγνητισμός
- Metamaterials and metasurfaces
- Reconfigurable intelligent surfaces
- Applied electromagnetics
- Complex radar cross section
- Carbon fibers
- Free-space path loss
- Finite element method in electromagnetics
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Communication engineering and systems, Telecommunications
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/59846