Back to search

National Technical University of Athens (NTUA)

Σύνθεση και μελέτη νανοϋβριδικών υλικών άνθρακα για περιβαλλοντικές εφαρμογές

Abstract

dc:description

The aim of the present doctoral thesis is the synthesis and characterization of carbon-based nanohybrid materials for environmental applications. Carbon-based nanomaterials are wellknown for their remarkable physicochemical properties, which make them ideal adsorbents for water treatment, whereas their combination with magnetic nanoparticles enables their facile separation from the aqueous environment after utilization by means of an external magnetic field.The first part of the doctoral dissertation presents the theoretical framework of the study in order to familiarize the reader with the subject matter. Chapter 1 focuses on water pollution, one of the most significant environmental issues of the 21st century, with adverse effects on ecosystems and human health. Emphasis is placed on organic pollutants, listing the most common compounds found in water, while providing indicative examples of environmental pollution incidents around the world. In addition, the most important methods for addressing water pollution are presented, including various physical, chemical, and biological processes. Among them, adsorption, a simple, efficient and low-cost process for the removal of organic pollutants from the aquatic environment constitutes the subject of the experimental part of this study. Adsorption is a surface phenomenon where molecules of the adsorbate accumulate through physical and/or chemical interactions on the surface of a solid, referred to as the adsorbent. The process depends on various factors, such as the physicochemical characteristics of both the adsorbate and the adsorbent material, as well as the pH of the solution and temperature. Various materials have been used in water remediation, including activated carbon, natural zeolites, chitosan, etc. In recent years, the scientific community has shown increasing interest in carbon-based nanomaterials due to their exceptional physicochemical properties, as well as in their combination with magnetic nanoparticles, with the aim of developing novel nanohybrid materials. Moreover, Chapter 2 presents the classification of carbon-based nanomaterials (2-D, 1-D, 0-D), according to their dimensions at the nanoscale, along with their synthesis methods. Among 2-D carbon-based nanomaterials, graphene plays a key role, being the fundamental building block of all graphitic materials, regardless of dimensionality. It is a single atom thick monolayer of graphite in which sp2-hybridized carbon atoms are arranged in a hexagonal structure. Graphene oxide (GO) is a graphene derivative, where a large number of oxygen-containing functional groups is introduced into the graphene lattice, altering its aromatic character and converting a large fraction of sp2 hybridization into sp3. GO will be an important component in the experimental stage of this dissertation, as its unique physicochemical properties make it ideal for its utilization as an adsorbent material. Similarly, CDs, which belong to the category of 0-D carbon-based nanomaterials, will also be investigated since their surface rich in functional groups, non-toxicity and low-cost synthesis, make them attractive candidates for water remediation applications. Nevertheless, both GO and CDs are difficult to remove from water after use. Therefore, their combination with magnetic nanoparticles is a highly promising approach, as it enables their facile removal from the aqueous medium via an external magnet. An introduction to the magnetic properties of matter, followed by an overview of ferrites and their synthesis methods are also presented in the same chapter. More specifically, ferrites are magnetic ceramic materials that exhibit spinel, garnet, hexaferrite or orthoferrite crystalline structures. Among them, the most important is the spinel structure, named after the mineral spinel (MgAl2O4), with the general formula MFe2O4, where M represents a divalent metallic cation. Spinel ferrites find applications in catalysis/photocatalysis, biomedicine, sensors, magnetic devices and water remediation. Recent scientific studies describe various methods for synthesis of carbon-based nanomaterials-ferrite hybrid structures, which can be classified into two major categories: i. ex situ methods, consisting of simple mixing of the components under suitable conditions and ii. in situ methods, which involve self-assembly of one component in the presence of the other, or even simultaneous growth of both. The presented studies explore the application of such materials in removing a wide range of organic pollutants from water, with particularly encouraging results. To sum up, it becomes evident that in today’s world, the rapid advancement of technology and the demand for new applications have generated a tremendous need for innovative materials with advanced properties, leading to the impressive progress of materials science. Aiming to contribute both to the advancement of materials science and to the protection of the environment and human health, this doctoral thesis investigates the development of the innovative nanohybrid materials GO-CuFe2O4, CDs-CuFe2O4 and GO-CDs-CuFe2O4, their characterization using a wide range of techniques and their efficiency in the removal of the azo dye, Congo Red, from water.The second part of the thesis presents the experimental procedures followed and the obtained results. Chapter 3 discusses the synthesis and characterization of carbon-based nanomaterials.GO was synthesized via a modified Hummers method, which involves the simultaneous exfoliation and oxidation of graphite sheets by a strong oxidizing mixture of H2SO4/KMnO4. Through this sequence of chemical reactions, oxygen-containing groups are gradually incorporated into the lattice and edges of the graphite sheets, promoting further exfoliation, which is enhanced by subsequent ultrasonic treatment. The as-prepared GO undergoes further chemical treatment to convert part of the hydroxyl and epoxy-groups into carboxyl-groups. The carboxylation process aims to increase the chemical reactivity of GO and improve its surface chemical homogeneity. The physicochemical characteristics of GO were studied via several characterization techniques (XRD, micro-Raman, FT-IR, UV-Vis, TGA, HR-TEM, and N2 porosimetry), confirming the successful processes of oxidation and carboxylation. Similarly, CDs were synthesized via a solvothermal method using citric acid and urea as precursors and their properties were studied using FT-IR, UV-Vis, PL and TEM analysis. Chapter 4 describes the synthesis of pristine CuFe2O4 nanoparticles via the solvothermal method. The characterization results were used not only to understand their structure and properties, but also as a reference for comparison and evaluation in the following sections investigating the combination of CuFe2O4 with carbon-based nanomaterials. Furthermore, Chapter 5 investigates the development of GO-CuFe2O4 nanohybrids, which involvesthe modification of carboxylated GO with the surfactants CTAB and PSS, followed by in situ formation of nanoparticles on its surface via solvothermal treatment. Characterization confirmed the successful combination of the two components. Notably, the formation of magnetic nanoparticles between the GO sheets resulted in further exfoliation, as observed by XRD and micro-Raman analyses. FT-IR spectroscopy identified chemical bonds originating from the graphene lattice, as well as from metal components, while thermogravimetric analysis in air indicated improved thermal stability due to CuFe2O4 incorporation. Morphological studies via FE-SEM and HR-TEM revealed welldispersed spherical nanoparticles on the graphene sheet surface. As expected, BET measurements showed that the specific surface area of the nanohybrid material was lower in comparison with GO, due to the reduction in the proportion of unoccupied pore sites. Magnetic property analysis via SQUID also showed a decrease in saturation magnetization compared to ferrite nanoparticles, attributable to the carbon content. Moreover, Chapter 6 investigates the synthesis of CDs-CuFe2O4 nanohybrids and the effect of CDs’ concentration on their final physicochemical characteristics. Similarly to the synthesis of GO-CuFe2O4 nanohybrid, CuFe2O4 nanoparticles are formed in situ in the presence of CDs, via the solvothermal method. The characterization of the as-prepared materials confirmed the successful integration, whereas it was noticed that the increasing CDs concentration influenced several properties, including morphology. The final class of carbon-based nanohybrid materials examined in this study combines GO and CDs with CuFe2O4 nanoparticles-a case that, up to date, has not been reported in the international literature. Chapter 7 describes the synthesis of GO-CDs-CuFe2O4 nanohybrids, with varying initial CDs content, along with their characterization via XRD, micro-Raman, FT-IR, TGA, HR-TEM, N2 porosimetry and SQUID. For comparison purposes,the combination of GO-CDs in the absence of magnetic nanoparticles was also studied. It is worth mentioning that spherical structures composed of CDs and CuFe2O4 nanoparticles wereobserved on the GO surface, confirming the successful solvothermal synthesis. Chapter 8 focuses on the application of the as-synthesized nanohybrid materials in the removal of the azodye Congo Red from water. Herein, it is important to note that the presence of Congo Red in the environment poses serious risks, as under anaerobic conditions it can be degraded by certainmicroorganisms and bacteria to the carcinogenic compound benzidine. For this reason, the European Union has issued Directive 2002/61/EU, which prohibits the use of azo dyes that may release, through reductive cleavage of one or more azo groups, certain aromatic amines (in concentrations higher than 30 ppm), including benzidine, in textile and leather products thatmay come into direct and prolonged contact with the skin or oral cavity. In this section, the removal efficiency of Congo Red dye using GO-CuFe2O4, CDs-CuFe2O4 and GO-CDs-CuFe2O4 was assessed under different conditions, including initial pollutant concentration, adsorption time and pH. The recyclability of the adsorbents was also examined, as it plays an important factor for the economic feasibility and practical application. Furthermore, the adsorption mechanism of each system is also investigated by fitting experimental data to various mathematical models. The doctoral thesis concludes with Chapter 9, which contains the research findings and proposals for future work. Finally, Appendices I-IV provide essential information on characterization methods, as well as, interesting results from similar indicative studies conducted in the laboratory as part of the doctoral research.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zourou, Adamantia
  • Ζούρου, Αδαμαντία

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/59871

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zourou, Adamantia; Ζούρου, Αδαμαντία. Σύνθεση και μελέτη νανοϋβριδικών υλικών άνθρακα για περιβαλλοντικές εφαρμογές. National Technical University of Athens (NTUA), 2025. http://hdl.handle.net/10442/hedi/59871