Aristotle University Of Thessaloniki (AUTH)
Deep desulfurization of liquid fuels by advanced nanoporous materials via adsorption and catalytic processes at mild conditions
Abstract
dc:descriptionThe presence of sulfur compounds in liquid fuels (gasoline, diesel) causes serious environmental and health impacts due to SOx emissions. Strict legislation (<10 ppmwS) makes the development of efficient deep desulfurization methods necessary. Conventional hydrodesulfurization (HDS) is energy-intensive and ineffective against refractory sulfur compounds, such as dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). As alternatives, adsorptive and oxidative desulfurization, under mild conditions, without hydrogen, have attracted significant attention. The present dissertation aims at the design and evaluation of advanced nanoporous materials, mainly activated carbons, for the removal of low-sulfur compounds (<20 ppmwS) from transportation fuels via adsorption or catalytic oxidation. Special emphasis was given to the effect of aromatic compounds at realistic concentrations, a frequently unexplored issue that limits the performance in both adsorptive and catalytic desulfurization. Initially, commercial and chemically modified activated carbons with different physicochemical characteristics were evaluated for the adsorptive desulfurization of model sulfur compounds (DBT, 4,6-DMDBT) under mild conditions. Oxidation with nitric acid significantly improved desulfurization capacity by introducing oxygen-containing surface groups, allowing some materials to achieve deep desulfurization (92% DBT removal from hexane for SX PLUS-ox and 68% 4,6-DMDBT removal from hexadecane). Thermal regeneration at 500 °C proved to be the most effective regeneration method, maintaining high performance over multiple adsorption cycles. Studying the effect of aromatic compounds on adsorptive desulfurization, benzene and naphthalene were selected as representative mono- and di-aromatic compounds, respectively. The results showed that while low concentrations of aromatics had limited effect in desulfurization, very high concentrations (comparable to those found in diesel) decreased the desulfurization capacity of the materials by 50–60%. In particular, the presence of anthracene caused a dramatic decline (75–85%), highlighting the strong competition from polyaromatic compounds arising from the similar molecular size, structure, and adsorption mechanisms between the aromatic and sulfur compounds. The research also focused on deep desulfurization of real diesel, using commercial and oxidized carbons, in order to investigate the role of their physicochemical properties. BAX and CPL carbons showed the highest performance due to their high degree of graphitization and wide pore size distributions, while oxidation improved desulfurization, achieving final sulfur concentrations <1 ppmwS. Overall, desulfurization of real diesel is governed by a complex interplay of various physicochemical properties. π–π interactions were identified as the main adsorption mechanism of thiophenic compounds on activated carbons, as also confirmed by DFT studies conducted in this dissertation. Additionally, novel waste-derived activated carbons were synthesized and evaluated, as sustainable adsorbents for deep desulfurization. The carbon obtained from the gasification of mixed biomass wastes (olive and grape pomace), activated with phosphoric acid, achieved 74% removal of 4,6-DMDBT, surpassing the performance of all commercial carbons. The high efficiency was attributed to the presence of acidic minerals, particularly silicates, which may enhance acid-base interactions. Oxidative desulfurization (ODS) was also explored as a complementary method to hydrodesulfurization, through surface modification of activated carbons with molybdenum oxide nanoparticles. The modified carbons functioned synergistically, both as adsorbents and catalysts, achieving effective oxidation of sulfur compounds using hydrogen peroxide, under mild conditions. The encouraging results showed that, although molybdenum oxide deposition had small effect on adsorption capacity, even low metal loadings (5 wt%) significantly enhanced catalytic activity, achieving complete conversion of 4,6-DMDBT at ambient temperature. Remarkably, the catalysts with only 5% Mo loading sustained full desulfurization efficiency (100%) even under demanding conditions, such as elevated sulfur levels (200 ppmwS) and high aromatic content. The final chapter focused on adsorptive desulfurization under dynamic conditions in a fixed-bed system using nanoporous activated carbons for the removal of 4,6-DMDBT. A key innovation was the investigation of the effect of high concentrations of aromatic compounds, an aspect rarely addressed under dynamic conditions.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Salonikidou, Eleni
- Σαλονικίδου, Ελένη
Subjects
dc:subject × 14- Νανοπορώδη υλικά
- Υγρά καύσιμα μεταφοράς
- Ενεργοί άνθρακες
- Προσροφητική/ οξειδωτική αποθείωση
- Nanoporous materials
- Liquid transportation fuels
- Activated carbons
- Adsorptive/ oxidative desulfurization
- Χημεία
- Φυσικές Επιστήμες
- Χημεία, άλλοι τομείς
- Chemical Sciences
- Natural Sciences
- Chemistry, miscellaneous
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/60112