Back to search

National Technical University of Athens (NTUA)

Advanced energy production and storage systems from renewable energy sources for building and industrial applications

Abstract

dc:description

The present Ph.D. thesis focuses on the detailed analysis and investigation of advanced energy production and storage systems for applications in the industrial and building sectors. The emphasis is put on thermal energy storage (TES) systems and the integration of hydrogen production units as a form of energy storage. These systems store surplus energy from the intermittent production of renewable energy sources. Taking into account that the need for energy storage is strongly related to renewable-based energy production, various energy generation systems, such as solar thermal collectors, photovoltaic (PV) panels, and thermodynamic cycles, are also analyzed. Notably, the hybridization of different energy storage methods, along with the production of multiple energy forms, is emphasized. The configurations are simulated under both steady-state and dynamic conditions and evaluated based on energy, exergy, economics, and carbon emissions savings to provide a comprehensive assessment.Renewable sources, such as solar, wind, geothermal, and biomass, along with alternative sources such as industrial waste heat, are capable of feeding electricity, heat, and cooling generation units in both residential and industrial sectors. The integration of cogeneration and multigeneration systems enhances overall thermodynamic efficiency, with a strong focus on ORCs and CO₂ Brayton cycles. Hydrogen is highlighted not only as a clean energy carrier but also as a long-term storage solution. Studies also emphasize the role of pumped thermal energy storage (PTES) and multigeneration in the building sector, suggesting promising avenues for decarbonization. CAES, especially in adiabatic setups combined with TES, is also explored as a viable storage alternative. The literature confirms the maturity of single-output energy systems and underscores growing interest in hydrogen-integrated multigeneration setups. However, several research gaps persist, such as limited studies on hybrid thermal-hydrogen storage, incomplete exploration of hydrogen-electricity storage optimization, and underdeveloped analyses of s-CO₂ cycles and cooling storage systems in industrial and building contexts. Notably, dynamic performance studies of CAES systems, particularly with integrated TES, remain scarce, pointing to significant opportunities for further research and system optimization. The governing equations and mathematical models used to simulate a wide range of energy production and storage systems are outlined. Each model undergoes thorough validation and verification processes using experimental data and results from the literature to ensure reliability. Key thermodynamic performance metrics, such as thermal, electrical, energy, and exergy efficiency, coefficient of performance, and round-trip efficiency, used for proper system assessment, are defined. Alongside technical performance, the systems are analyzed from economic and environmental perspectives, focusing on cost-effectiveness and carbon emission reductions. The proposed comprehensive simulation framework is supported by modeling tools including Matlab, EES, TRNSYS, and Aspen Plus. Comparative analyses across different software tools further confirm model accuracy. Ultimately, a multi-objective optimization strategy is introduced to identify optimal system designs based on multiple criteria, reflecting a holistic assessment of thermodynamic, economic, and environmental performance. The simulation studies carried out in this thesis on various energy production and storage systems, with a focus on key findings and detailed discussions, are provided in Chapter 6. Section 6.1 explores electricity-hydrogen cogeneration systems using PTCs, ORCs, and water electrolyzers, analyzing two applications, one for a non-interconnected island and another for industrial use. The study examines the hybridization of thermal and hydrogen storage. If half of the ORC electricity production feeds the electrolyzer for hydrogen production, the yearly simulation study for the location of Athens, Greece, reveals that the annual energy and exergy efficiencies are computed at 14.9% and 15.9%, respectively. Additionally, Section 6.2 investigates multigeneration and storage configurations in industrial settings, studying two innovative plants powered by alternative energy sources. The first system uses PTCs combined with a CO₂ Brayton cycle and integrates thermal and hydrogen storage. A biomass boiler is placed strategically after the CO₂ recuperator to increase the temperature of the stream feeding an ORC, which is integrated as a secondary power cycle. Electricity, heat, cooling, and hydrogen are produced. Energy and exergy efficiencies achieve values up to 37.89% and 20.86%, revealing the potential of thermodynamic performance enhancement through hydrogen integration in multigeneration systems. The thesis also examines another industrial installation on a biofuels plant based on an ORC module and an absorption chiller powered by waste heat streams and solar heat. The integration of both hot and cold storage tanks is explored. It is worth noting that the incorporation of a cold water storage tank is beneficial for the performance of the absorption chiller, as the annual digester cooling production increases by 4.4%. Furthermore, Section 6.3 proposes a multi-output production and storage system for buildings, with a multi-stage heat pump, ORC, and various hot and cold TES systems. The integration of the “Carnot battery” (PTES) and polygeneration concepts within this system is an innovative element. According to the results, the energy and exergy efficiencies are calculated up to 368.7% and 49.7%, respectively, at steady-state conditions. During the dynamic analysis, this system is applied in a residential building in Athens, Greece, aiming to meet all the energy demands (heating, cooling, domestic hot water, and electricity for appliances and lighting). The required electricity is supplied by PV panels, and the potential integration of battery storage is also explored as a secondary energy storage solution. At the selected final design, the mean load coverage of the building needs is about 86.7%. Moreover, Section 6.4 presents an adiabatic CAES system with integrated TES tanks, analyzing the dynamic charging and discharging processes and dimensioning components, such as storage tanks and air caverns, for different target temperatures and charging durations. The analysis of annual performance shows that the system's yearly round-trip (power-to-power) efficiency is 46.92%, assuming that it charges during off-peak hours when electricity prices are low (noon hours) and discharges during high-demand periods (evening hours). Finally, Chapter 7 presents the main conclusions of the Ph.D. thesis, the innovative aspects of the research, and recommendations for future studies in the field.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Lykas, Panagiotis
  • Λύκας, Παναγιώτης

Subjects

dc:subject × 16

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/60170

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Lykas, Panagiotis; Λύκας, Παναγιώτης. Advanced energy production and storage systems from renewable energy sources for building and industrial applications. National Technical University of Athens (NTUA), 2025. http://hdl.handle.net/10442/hedi/60170