Back to search

National and Kapodistrian University of Athens

WO3-x photonic crystals for photoinduced applications

Abstract

dc:description

Nanostructured transition-metal oxide semiconductors have attracted significant attention as functional materials for photoinduced environmental and energy applications, including the photocatalytic degradation of organic pollutants in water and the photoelectrochemical (PEC) splitting of water. Among them, nanostructured semiconductor substrates are also emerging as promising materials for the sensitive detection of organic compounds via surface-enhanced Raman scattering (SERS), offering an alternative to conventional noble-metal substrates that suffer from high cost, limited stability, and poor recyclability. Current research efforts focus on the development of metal oxides with well-controlled morphology and crystallinity, optimized electronic properties, and enhanced light-harvesting and charge-separation efficiency. A particularly effective structural approach involves integrating these oxides into photonic crystal architectures, such as inverse opals, which can manipulate light propagation and exploit slow-photon effects to enhance photoinduced processes. The present thesis focuses on the design and synthesis of photonic photocatalysts based on tungsten trioxide (WO₃), aimed at efficient visible-light utilization through slow-photon effects and improved charge-carrier separation for photocatalytic and photoelectrochemical applications. The approach includes the fabrication of inverse opal WO₃₋ₓ photonic structures, spectral tuning of their photonic band gap (PBG) relative to the semiconductor absorption edge, and targeted modification of their electronic properties to maximize performance. The study also explores hybridization with plasmonic metals to couple photonic and plasmonic effects for dual enhancement of photocatalytic and SERS activity.Photonic WO₃ inverse opals with tunable PBG were fabricated by the co-deposition of colloidal spheres and metal-oxide precursors followed by controlled thermal treatment. These ordered macroporous films displayed well-defined photonic stop bands and a close spectral overlap between the PBG and the absorption edge of WO₃, which selectively enhanced photocatalytic activity under ultraviolet and visible illumination. Optimal performance was achieved when the high-energy edge of the PBG coincided with the semiconductor absorption edge, leading to pronounced improvements in both PEC water splitting and photocatalytic degradation of pharmaceutical pollutants such as tetracycline and ibuprofen.To further enhance charge transport and light utilization, WO₃/TiO₂ photonic heterostructures were developed with varying W/Ti ratios. Structural and spectroscopic analyses confirmed the formation of monoclinic WO₃ and anatase TiO₂ phases uniformly distributed within the inverse opal network. Systematic variation of the oxide composition and colloidal template size enabled precise tuning of the PBG position. Mott–Schottky and UPS analyses revealed a continuous shift in Fermi level and the formation of type-II heterojunctions, which facilitated efficient interfacial charge transfer between WO₃ and TiO₂. The synergistic combination of slow-photon light trapping and interfacial charge separation led to markedly improved photoelectrochemical responses compared to single-component structures. The effect of controlled reduction on WO₃ photonic crystals was also investigated. Thermal or chemical reduction under H₂ or acid-induced conditions generated oxygen-deficient WO₃₋ₓ phases with enhanced n-type conductivity, visible–near-IR absorption, and improved PEC and photocatalytic performance. Structural analyses (XRD, Raman, XPS) confirmed the partial transformation of monoclinic to orthorhombic WO₃ accompanied by defect formation and a shift in the Fermi level. The optimized reduced samples exhibited superior photocurrent generation and degradation rates for pharmaceutical pollutants, attributed to the combined effects of oxygen vacancies, increased donor density, and reduced electron–hole recombination.To couple plasmonic and photonic effects, Au nanoparticles were incorporated into the WO₃ framework. The resulting hybrid Au/WO₃ systems displayed strong spectral overlap among the localized surface plasmon resonance (LSPR), the WO₃ absorption edge, and the photonic band gap. These resonant interactions significantly enhanced light absorption, charge separation, and photocatalytic efficiency. The plasmonic enhancement strongly depended on nanoparticle size: Au nanoparticles of 20 nm diameter provided optimal PEC performance due to near-field amplification via LSPR, whereas smaller particles (5 nm) favored pollutant degradation by lowering the Schottky barrier and facilitating interfacial electron transfer.Finally, hybrid plasmonic–photonic substrates based on Ag–WO₃/TiO₂ inverse opals were developed for SERS detection of organic analytes. These composites combined photonic light confinement with plasmonic field enhancement, resulting in a synergistic increase in Raman signal intensity. The optimized Ag–WO₃/TiO₂ substrates exhibited extremely high SERS sensitivity for 4-mercaptobenzoic acid (4-MBA), achieving a detection limit as low as 10⁻¹³ mol L⁻¹. The enhancement was primarily attributed to the electromagnetic mechanism, originating from the spectral overlap of the Ag nanoparticle LSPR and the photonic stop band with the excitation wavelength, while an additional chemical contribution arose from charge transfer between the adsorbed molecules and the semiconductor heterointerface. In summary, the work demonstrates that combining tungsten oxide photonic architectures with heterojunction engineering, defect control, and plasmonic coupling provides an effective pathway for tailoring light–matter interactions across multiple spectral regimes. The resulting plasmonic–photonic WO₃₋ₓ composites exhibit enhanced photocatalytic, photoelectrochemical, and SERS performance, offering a versatile platform for solar-driven environmental remediation and molecular sensing.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Apostolaki, Maria-Athina
  • Αποστολάκη, Μαρία-Αθηνά

Subjects

dc:subject × 16

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/60387

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Apostolaki, Maria-Athina; Αποστολάκη, Μαρία-Αθηνά. WO3-x photonic crystals for photoinduced applications. National and Kapodistrian University of Athens, 2025. http://hdl.handle.net/10442/hedi/60387