Back to search

Democritus University of Thrace (DUTH)

Enhanced design of DC microgrids for more electric transportation means

Abstract

dc:description

Greenhouse gas (GHG) emissions from the transportation sector are one of the main contributors to climate change. The electrification of aircraft and road vehicles provides an effective means to mitigate this impact by improving the energy efficiency of air and land mobility. In aviation, the transition toward the More Electric Aircraft (MEA) concept—where mechanical, hydraulic, and pneumatic subsystems are replaced by power electronic solutions—enhances energy efficiency and system reliability, while it reduces fuel consumption. In parallel, electric vehicles (EVs), including passenger cars and heavy-duty vehicles (buses and trucks), achieve substantially higher efficiency across the energy conversion chain, than internal combustion engine (ICE) vehicles, resulting in lower GHG emissions and reduced operating costs.The advancements of MEA and EV technologies rely heavily on the progress in power electronics systems, as increasingly higher power levels must be processed on-board within strict limits of size, weight, and thermal handling. Consequently, only converter topologies with ultra-high efficiency and power density can meet the stringent requirements of these industries. In this context, wide bandgap (WBG) semiconductor devices have emerged as key enablers of this technological shift. Their ability to operate at higher switching frequencies allows the downsizing of filter components, while maintaining manageable cooling needs and enabling scalability and fault tolerance. WBG-based power converters form the backbone of the power distribution networks, i.e., microgrids (MGs) in MEA and EV systems. Modern transportation MGs increasingly incorporate diverse energy generation and storage sources, as well as new types of electronic loads such as pulsed-power, constant-power. As a result, advanced MG architectures and cooperative energy management strategies are essential for achieving high efficiency, power quality, safety, and reliability.Since most on-board loads and subsystems feature inherently DC operation, hybrid MG structures comprising both DC and AC buses are gaining traction, with purely DC architectures regarded as the most promising for future MEA and EV platforms. The rapid progress in electrified transportation also drives the modernization of on-board power generation, conversion, and distribution systems Simultaneously, it encourages the development of upgraded charging infrastructures that integrate renewable energy sources (RES) and energy storage systems (ESSs), supporting bidirectional power flow, energy recovery, and vehicle-to-grid (V2G) operation. Such advancements contribute to enhanced grid flexibility and resilience, with optima utilization of renewable energy.In this light, the primary objective of this dissertation is to advance transportation electrification through the optimal design of power electronic systems and the development of suitable architectures for power quality enhancement and effective energy management. The work focuses on reducing energy consumption and fossil fuel use in MEA and EV applications by adopting high-efficiency, high-power-density converter topologies and exploiting the renewable energy potential available in transportation environments. Within this framework, the dissertation proposes an innovative and optimal design for a power conditioning system intended for on-board DC MGs. The system includes a fast-response supercapacitor (SC) bank and a bidirectional DC-DC converter, capable of integrating the SCs into the DC bus. This power conditioner effectively compensates for DC bus voltage transients, such as sags, swells, pulsed-load events, and engine-related disturbances, thus supporting high power quality and reliable MG performance. The proposed design provides two major enhancements. First, an effective control loop based on the peak current control (PCC) method is combined with a detailed converter average model, to improve the dynamic response. Second, the converter gravimetric power density is improved through an innovative inductor design. A comprehensive sensitivity analysis identifies the significant influence of inductor resistance on the control loop control performance. Based on this insight, a multi-objective optimization is conducted across a wide dataset of E-shape ferrite cores, targeting minimized resistance while maintaining acceptable power density. The resulting Pareto front highlights the inherent trade-offs and limitations. Extensive simulations confirm the findings of the sensitivity analysis, whereas the proposed controller is experimentally validated on a developed hardware prototype.Building upon those results, the study explores an expanded configuration; a series-stacked modular bidirectional DC-DC converter, derived from the bidirectional buck-boost topology, enhanced with phase-shifted pulse-width modulation (PWM). This modular approach enables a compact, lightweight, and fault-tolerant design, reduces voltage stress on semiconductor devices, and allows the use of low-voltage SC cells or modules. Phase-shifted PWM achieves a virtual increase in switching frequency without raising switching losses, thereby reducing the output current ripple and minimizing the need for bulky low-pass filters. Simulation results across various operating scenarios demonstrate improved performance, dynamic behavior, and fault tolerance. Next, the focus of the thesis if shifted to road transportation, which remains a major source of air pollution in densely populated urban areas. A detailed literature review is performed to identify state-of-the-art technologies, performance indicators, and design criteria for environmentally friendly urban transport, particularly thermal city-buses. Replacing ICEs with electric propulsion systems and hybridizing buses using ESSs are highly effective measures for reducing fuel consumption and CO2 emissions. Significant advancements have also been achieved in on-board renewable harvesting, regenerative braking, and other energy saving mechanisms. A key topic investigated is Vehicle Integrated and Applied Photovoltaics (VIAPVs), which offer attractive opportunities for city-buses due to their large rooftop area and high solar energy potential. The energy yield of VIAPVs is heavily dependent on the bus route, shading conditions, traffic patterns, and the Maximum Power Point Tracking (MPPT) algorithm used. Four commercial MPPT algorithms are experimentally evaluated through emulation, under realistic driving scenarios, revealing substantial differences in performance between terrestrial PV systems and mobile VIAPV applications. The findings highlight the critical importance of MPPT optimization in transportation environments.Although the aforementioned PV integration offers clear environmental and energy saving benefits, it presents challenges for the PV interfacing converter, particularly regarding MPPT under partial shading and dynamic operating conditions. To address those issues, the research work investigates PV cell-level inverters, which have recently gained attention due to their ability to minimize mismatch losses caused by partial shading, degradation, and cell-to-cell variations. Each solar cell is interfaced with a dual-stage power converter (step-up DC-DC and H-bridge DC-AC), while the inverters are connected in a cascaded H-bridge (CHB) configuration. This system can operate in standalone mode, supplying the MG buses, or in grid-tied mode, enabling V2G operation during off-duty hours. The study develops a fully decentralized control scheme for grid-connected CHB PV cell-level inverters. The proposed approach eliminates communication needs between cell controllers and central units, whereas the control concept for grid-tied operation is analytically formulated, identifying challenges in synchronization, power regulation, and cell adjustment. Two alternative schemes are investigated; (a) Sinusoidal Pulse Width Modulation (SPWM)-based control, evaluated in active power maximization, reactive power regulation, and reactive power minimization configurations, and (b) a multilevel-based self-synchronized/self-adjusted scheme that reduces switching losses and supports power line communication, albeit with power curtailment at cell level. Experimental results on a laboratory prototype validate the practical feasibility, as well as the advantages, and limitations of both approaches. Finally, it is worth noting that the theoretical investigation and mathematical modeling of the proposed MEA and EV power conversion systems are supported through comprehensive co-simulation using MATLAB/Simulink (for control design) and PLECS (for high-fidelity power-stage modeling) simulation platforms. Furthermore, the functionality and performance of the converters and control strategies are experimentally validated using laboratory-scale hardware prototypes and microcontroller units.

Degree

thesis:*
Grantor dc:publisher
Democritus University of Thrace (DUTH)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Rigogiannis, Nikolaos
  • Ρηγογιάννης, Νικόλαος

Subjects

dc:subject × 26

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/60497

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Rigogiannis, Nikolaos; Ρηγογιάννης, Νικόλαος. Enhanced design of DC microgrids for more electric transportation means. Democritus University of Thrace (DUTH), 2025. http://hdl.handle.net/10442/hedi/60497