Aristotle University Of Thessaloniki (AUTH)
Οι πύργοι των μετοχίων της Χαλκιδικής: η επιρροή των ξύλινων στοιχείων στη στατική συμπεριφορά ορθογώνιων ελεύθερων πύργων
Abstract
dc:descriptionSUMMARY Part A: Historical Documentation of Monastic Estates and Towers in the Byzantine and Post-Byzantine Periods and Their Relationship with Society Monasticism in Chalkidiki dates back to the 4th century, with evidence of organized communal monastic life. Following invasions and the Iconoclasm period, monastic communities re-emerged in the 8th and 9th centuries. The Athonite monastic community was officially recognized in 883. From the 10th century onwards, due to the mountainous terrain of Mount Athos and the scarcity of arable land, the monasteries began acquiring metochia (landed estates and dependencies) outside the Athonite peninsula. These estates also served as residences for monks visiting urban centers for monastic affairs. By the 11th century, a significant portion of Kalamaria and Chalkidiki belonged to the monasteries of Mount Athos. Agricultural metochia functioned as large productive units, primarily cultivating cereals, which sustained the Athonite monasteries. They were integral to the monastic economy, generating income through the commercial exploitation of surplus produce. These estates contributed to the security and development of surrounding areas, often acting as nuclei for the formation of present-day villages. The paroikoi, or peasants cultivating the land of the metochia, were dependent on these estates but retained the right to bequeath their land. Monastic and metochial towers were massive, multi-storey structures serving primarily defensive purposes and acting as last refuges during sieges. They also protected independent installations (e.g., mills) and monitored movement on land and sea, particularly against pirate raids. Most metochial towers were constructed between the 11th and 14th centuries. It is estimated that approximately forty metochial towers and over seventy towers in total existed in Chalkidiki. The structural design of the towers was dictated by their defensive and storage functions, featuring structural autonomy and operational self-sufficiency. They were built using rubble masonry, reinforced with timber ties and wooden floors. Part B: Structural Analysis of Towers Using Detailed Simulations This section demonstrates that the use of detailed simulations to analyze the behavior of towers under various loading conditions—incorporating accurate modeling of both the three-leaf masonry and the wooden elements—yields valuable data for understanding their structural resilience and informs future conservation and restoration efforts. The study investigates the qualitative and quantitative influence of timber ties on the behavior of alternative simulation models of a “typical” tower in Chalkidiki. The tower is analyzed under both vertical loads and increasing horizontal thrust until failure. For the purposes of the analysis, a freestanding square-plan tower without buttresses was selected, measuring 7.00 × 7.00 m in plan and 15.00 m in total height. The three-leaf rubble masonry is modeled using the ADINA software, employing eight-node spatial finite elements and distinguishing between the individual layers.Four groups of tower models were developed: •NW (No Wood): Constructed solely of masonry, with timber elements limited to lintels. •CW (Complete Wood): Similar to NW, but with timber ties at successive levels, incorporating appropriate weakening at nail joint locations (a more realistic simulation). •CF (Complete Floor): Based on CW, with the addition of wooden floors. •FW (Full Wood): Based on CW, but with a denser network of timber ties, no weakening at joints, and no allowance for relative rotations at timber intersections. Masonry, as a heterogeneous and composite material, is modeled using ADINA’s “concrete material model,” which is considered to adequately approximate the behavior of rubble masonry. Three qualities of stone blocks (low, medium, high strength) and two qualities of mortar (medium, high strength) were considered. The compressive strength of each layer in the tripartite masonry was estimated based on the relevant provisions of the Greek Code for Structural Interventions (ΚΑΔΕΤ). Timber elements are modeled as beam-type linear elements using the Plastic Bilinear model from ADINA’s library. Mechanical properties were derived from Eurocode 5 (EC5), selecting natural hardwood timber of category D35. The study first outlines the procedure for load application and analysis of the tower models. It then presents a detailed commentary and exhaustive assessment of the towers’ response under vertical and horizontal inertial loading, with particular emphasis on the influence of geometric construction characteristics and timber elements. A comparative modal analysis is also presented, examining tower models both without timber elements (NW) and with integrated timber elements (CW), considering three different masonry qualities (weak, medium, strong). For each of the three principal horizontal excitation directions of the masonry, the two modes activating the highest mass participation are analyzed. Each chapter concludes with a summary of findings. Part C: Documentation of Twenty-One Towers This section presents data on twenty-one towers, either metochial or freestanding, including historical information, archival and contemporary photographs, chronological drawings and surveys, and any other information collected by the author. This constitutes an extensive repository of information for future researchers interested in the subject. Documentation of the physical and mechanical properties of the structural materials is provided for nine of the examined towers, based on laboratory analyses, along with a consolidated table of their characteristics. This final section includes a glossary of terms, the study’s bibliography, and additional literature relevant to the research topics.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Drosou, Konstantia
- Δρόσου, Κωνσταντία
Subjects
dc:subject × 20- Πύργοι, οχυρώσεις και αγροικίες
- Μοναστηριακά ιδρύματα
- Ξυλοδεσίες
- Ξύλινες ενισχύσεις τοιχοποιϊών
- Tower
- Monastic dependencies
- Wooden bindings
- Wooden reinforcements
- Ιστορία και Αρχαιολογία
- Ανθρωπιστικές Επιστήμες και Τέχνες
- Συντήρηση και Προστασία αρχαιοτήτων
- Επιστήμη Πολιτικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Δομοστατική
- History and Archaeology
- Humanities and the Arts
- Conservation
- Civil Engineering
- Engineering and Technology
- Structural Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/60522