Back to search

Agricultural University of Athens

Αξιολόγηση της ικανότητας συγκόλλησης ξυλείας Ευρωπαϊκής καρυδιάς (Juglans regia L.), για κατασκευές επίπλων εσωτερικού χώρου

Abstract

dc:description

The wood of the European walnut (Juglans regia L.) has long been and still is one of the most important wood species as a raw material, for a number of constructions and mainly interior furniture both in the Greek and the global timber market. The aim of this Doctoral thesis is to evaluate the bonding ability of European walnut (Juglans regia L.) wood (wild and originating from Greek plantations), for the construction of interior furniture. The experimental part of the thesis was carried out at the Dendrochronology Laboratory of the Department of Forestry and Forestry of the University of Athens in Karpenisi and at the Wood Technology Laboratory of the Department of Forestry and Forestry of the Aristotle University of Thessaloniki in Thessaloniki. A total of 54 samples of domestic walnut wood were produced and examined, and the effect of the roughness of the wood surfaces, which come from various forms of mechanical processing of wood (bandsaw sawing, circular saw sawing, planning and sanding), as well as 32 samples of the same wood glued, on the strength of wooden welded joints, was investigated. More specifically, the following parameters in domestic walnut wood were examined and studied in two sections. In the first section, the roughness of the treated walnut wood surfaces was studied. The wooden surfaces were produced after final processing with a band saw, circular saw, planer and sander. Different wood feed rates (5, 10, 15 and 20m/min) were used for planning and different types of sandpaper with different grain sizes were used for sanding (sandpapers No. 60, 80 and 120). Two walnut origins were used: wild and cultivated. The wooden surfaces on which the roughness was determined were tangential, radial or intermediate ("oblique"). The roughness measurements were taken parallel, perpendicular and at an angle of 45° ("oblique") to the direction of wood fibers. The roughness was determined on the surfaces immediately after their production by the machines. For the effect of the phenomenon of wood fiber lifting after their treatment (known as ‘’grain raising’’), the roughness of the surfaces was determined 24 hours and 7 days after their production.In the second section, the bonding ability of treated walnut wood was studied and specifically, the compression shear strength (ISO 6238:2001) and the percentage of wood failure. The wooden surfaces that were glued were produced with final processing by band saw, circular saw, planer and sander. A wood feed rate of 10m/min was used for planning and sanding No. 80 sandpaper was used for sanding.Two walnut wood origins were used: wild and cultivated and the wooden surfaces on which the roughness was determined, were tangential and radial. The wooden surfaces were glued with two adhesives: PVA type glue (D2), and Urea Formaldehyde (UF) type glue (Kaurit). The main conclusions from the presentation and analysis of the results of the study conducted to investigate the roughness of treated walnut wood surfaces, can be summarized as follows: The highest roughness values appeared immediately after treatment, on surfaces treated with a band saw (Ra 6.24μm), the lowest on surfaces treated with a planer (Ra 3.43μm). In the case of planning, the highest roughness values appeared on surfaces planed with a feed rate of 20m/min, the lowest on surfaces planed with a feed rate of 10m/min. In the case of sanding, the highest roughness values were displayed by the surfaces sanded with sandpaper No. 60, the lowest by the surfaces sanded with sandpaper No. 120. The roughness Ra of the surfaces affected by the time they remained after treatment in a proportional manner, i.e. the longer the time the surfaces remained after treatment, the higher their roughness. Higher roughness values were displayed by the surfaces that came from wild wood (Ra: 4.18μm), compared to those that came from cultivated wood (Ra: 4.10μm). In the case of processing the surfaces with a bandsaw, the surfaces of wild origin showed 22.2% lower roughness values Ra than the surfaces of cultivated origin. In the case of surface treatment with a circular saw, wild-origin surfaces showed 33.1% higher Ra roughness values than cultivated surfaces.The main conclusions from the presentation and analysis of the results of the study conducted to investigate the compression shear strength and percentage of wood failure (PWF) of glued walnut timber, can be summarized as follows: The highest compressive shear strength values were exhibited by the welded surfaces treated with a sander (14,696 kN/m2), the lowest by the surfaces treated with a planer (11,990 kN/m2). The highest WP values were exhibited by the welded surfaces treated with a sander (40.2%), the lowest by the surfaces treated with a bandsaw (34.9%). The effect of the origin of the trees (wild or cultivated) did not significantly affect the compressive shear strength of the welded specimens. The effect of the type of wooden surfaces (radial or tangential) affected the WP of the welded specimens. The radial surfaces exhibited higher WP values than the corresponding tangential ones. The glued wooden surfaces derived from radially cut wood, showed a total of 58.36% higher PWK values (45%), compared to the glued surfaces from tangentially cut wood (29%). The effect of the type of adhesive (PVA or UF) did not significantly affect the compressive shear strength of the glued specimens. In the cases of processing the wood with a band saw, circular saw and planer, the surfaces glued with PVA glue showed higher compressive shear strength values than the corresponding ones glued with UF glue. Exactly the opposite was observed in the surfaces processed with a sander. Finally, the wooden surfaces glued with UF glue showed a total of 106% higher PWK values (52%), compared to the surfaces glued with PVA glue (25%).

Degree

thesis:*
Grantor dc:publisher
Agricultural University of Athens
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Aidinidis, Efstratios
  • Αϊδινίδης, Ευστράτιος

Subjects

dc:subject × 27

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/60594

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Aidinidis, Efstratios; Αϊδινίδης, Ευστράτιος. Αξιολόγηση της ικανότητας συγκόλλησης ξυλείας Ευρωπαϊκής καρυδιάς (Juglans regia L.), για κατασκευές επίπλων εσωτερικού χώρου. Agricultural University of Athens, 2025. http://hdl.handle.net/10442/hedi/60594