Aristotle University Of Thessaloniki (AUTH)
Σχεδιασμός και κατασκευή εξαρτημάτων φυγοκεντρικών αντλιών ύδρευσης-άρδευσης με χρήση προηγμένων υλικών
Abstract
dc:descriptionThis doctoral dissertation investigates the mechanical properties of 3D-printed nanocomposite materials with the goal of creating end-use parts for centrifugal water pumps. Simultaneously, the best printing parameters are being investigated to create parts with the best mechanical strength. The use of advanced nanomaterials can improve performance due to their superior physical and mechanical properties. In more detail, the initial section of the thesis includes an experimental study which aims to compare composite materials with the metallic materials used for the construction of parts of centrifugal pumps, as well as to determine the mechanical properties of polymer matrix composite materials. The experimental study includes uniaxial tensile and compression tests, loading-unloading tests, nano-penetration, determination of vibrational behavior, scanning electron microscopy (SEM), and the utilization of a confocal microscope for the determination of surface roughness and morphology of the tested specimens. In the next section, an initial computational study is conducted in a computational fluid dynamics (CFD) environment, based on the results of the experimental study, to determine the maximum rated power of an impeller that can be constructed with composite materials under study. Following the latter, a three-dimensional scan and design of two cast iron impellers, one semi-open and one closed, were performed, with their nominal power coinciding with that calculated in the computational study. Upon completion of the 3D design, a study was conducted on the form of the hub connection of each impeller to the shaft of the pump, as they will be rebuilt from composite materials. Then, another computational fluid dynamics model was developed, in combination with the finite element method, the two impellers were simulated under theoretical operating conditions at the best efficiency point (BEP), considering the mechanical properties of the materials and their morphology. After the computational model was solved, the results were compared, and the preceding numerical model was verified regarding the strength of the impellers made of composite materials. Additionally, a computational study was conducted for the construction of cushions from composite materials. A similar procedure was followed with the pivot, a 3D scan of the cushions and the flexible jaw coupling was performed, and the digital twin of the assembly was created. The study was completed with the finite element analysis (FEA) simulation model, having entered the necessary data regarding the mechanical properties of the composite material. The results confirmed that the parts withstood the theoretical load values in this case as well. This section is completed with the 3D printing of the two impellers using the material extrusion (MEx) printing method and the cushions of the coupling. The dimensions of the printed parts are measured using a CMM to ensure the range of the parts' tolerances compared to the original parts. In the final section, the two pumping assemblies, consisting of the new components made of composite materials, are tested in a laboratory environment under real operating conditions. The conclusions drawn show that the new components outperform their metal counterparts, significantly increasing the efficiency of the pumps.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papageorgiou, Vasileios
- Παπαγεωργίου, Βασίλειος
Subjects
dc:subject × 15- Μηχανικές ιδιότητες σύνθετων υλικών
- Τρισδιάστατη εκτύπωση
- Φυγοκεντρικές αντλίες
- Αντίστροφη μηχανολογία
- Mechanical properties of composite materials
- Additive manufacturing
- Centrifugal pumps
- Reverse engineering
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανολογία
- Μηχανολογική μηχανική
- Mechanical Engineering
- Engineering and Technology
- Mechanics
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/60764