Back to search

National Technical University of Athens (NTUA)

Κοπή υλικών με μνήμη με χρήση laser

Abstract

dc:description

This thesis consists of two discrete parts, code development in FORTRAN in order to model Nitinol behavior from ambient temperature up to melting point and Nitinol laser cutting simulation using the developed code in a finite element analysis software, Abaqus. Nitinol is a shape memory alloy with broad applications. When used in sensitive areas, such as in the medical field (stents, etc.), it is important to minimize manufacturing defects that lead to failure. Simulation of the manufacturing process can provide a fast and cheap solution to investigate potential issues. FORTRAN was used to create the subroutine VUMAT, which is used in explicit thermomechanical simulations in Abaqus. Superelasticity and shape memory effect were accurately simulated using a novel concept based on the isotropic hardening von Mises plasticity model (non-rate dependent) that utilizes a radial return mapping algorithm with plastic (transformation) correction. On top of that, for the first time, a combination of the superelastic model with the Johnson-Cook viscoplastic plasticity model, which includes strain hardening, strain rate hardening and thermal softening effects was created. Verification of this combined model was performed on a single 3D cubic element (C3D8RT) with different mechanical and thermomechanical scenarios. Laser cutting simulation was setup in Abaqus using the subroutines VDFLUX, VDLOAD and VUMAT. Using the subroutine VDFLUX, a 3D conical moving heat source was simulated with a Gaussian distribution. Laser pulses of 0.5 ms were simulated in this thesis. The subroutine VDLOAD was used to add cutting gas pressure to the simulation on the cases where it was featured. Element deletion was also introduced for the first time in a laser cutting simulation, which improves the resulting variables compared to previous efforts in literature. A non-uniform stress field was simulated for the first time, although the temperature field was uniform. Verification of the laser cutting simulations were performed by comparison to experimental results from previous work and literature. Metallographic analysis, microhardness experiments and Differential Scanning Calorimetry were some of the methods used experimentally.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Dimopoulos, Christos
  • Δημόπουλος, Χρήστος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/60867

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Dimopoulos, Christos; Δημόπουλος, Χρήστος. Κοπή υλικών με μνήμη με χρήση laser. National Technical University of Athens (NTUA), 2025. http://hdl.handle.net/10442/hedi/60867