University of Ioannina
Πορώδη υλικά άνθρακα από απόβλητα και βιομάζα για περιβαλλοντικές και ενεργειακές εφαρμογές
Abstract
dc:descriptionThis doctoral thesis deals with the synthesis and study of porous carbon materials. Although porous carbon in its various forms, from charcoal to activated carbon, has been known for its action for millennia, research in this field has not waned. On the contrary, in the 21st century, significant research developments have led to the creation of activated carbon materials with highly desirable characteristics, such as a very high specific surface area or the creation of mesopores. It is no secret that a major contribution to this field of research has been the increased sense of responsibility of humanity over the last 3-4 decades regarding the management of waste and biomass and, more generally, regarding its legacy to future generations. As a result, a wide range of carbonaceous materials that would previously have been simply discarded in landfills, have been used as raw materials for the production of activated carbon. In fact, this process has been a complete success, as not only have materials that had seemingly reached the end of their life cycle been converted into second-life products, but in the case of activated carbon, they proved to be far from having degraded properties, as other post-consumer products might have, with their porous characteristics sometimes being better than those of activated carbon materials made from traditional raw materials still used in industry, such as bituminous coal, wood, peat, lignite, etc. The research focused on the synthesis of materials from cellulose-rich carbon raw materials, without however excluding other carbon sources. Thus, waste and biomass such as cigarette filters, peanut shells, cotton fabric, kitchen paper, Wettex®, sheep's wool, A4 printing paper, foam, masks and coffee bean peels were studied. Probably for the first time in the literature, porous materials were produced from the combination of multiple raw materials during the initial carbonization stage, which led to (useful for a variety of applications) hierarchical structures due to the diversity of the initial materials with a combination of cigarette filters and Wettex®, cigarette filters and peanut shells, or cigarette filters, Wettex®, and peanut shells. In addition, hybrid materials were synthesized by introducing magnesium and zinc oxides into the activated carbon. At the same time, a thorough study was conducted of the dominant factors affecting the porous characteristics of the materials (mass ratio of potassium hydroxide to carbon, activation temperature, heating rate, duration of heat treatment). This led to clear conclusions that can be used as data for the creation of corresponding materials with specific porous characteristics. As a result, this doctoral thesis provides a comprehensive study for determining parameters for the reproducible production of hierarchical porous activated carbons with extremely high surface area. The new materials developed exhibited improved or even new properties with potential uses in a range of environmental and energy applications. More specifically, as part of the doctoral thesis, porous activated carbon materials with very high specific surface areas of up to 4300 m2/g were produced. The materials exhibited a hierarchical structure with the presence of mainly mesopores in the 3-4 nm (diameter) range but also the existence of micropores (~0.9 nm). A thorough study of the synthesis conditions led to the establishment of standard conditions to produce materials with very high specific surface areas accompanied by an increased presence of mesopores, but also the presence of oxygen functional groups on the surface of the materials, which reverses the inherent hydrophobicity of the activated carbons. Thus, samples with a high potassium hydroxide to carbon mass ratio of 7 to 1 in combination with an activation temperature of 800 °C were found to have exceptional porous characteristics. Other factors, such as the heating rate and the duration of heat treatment, appeared to have a significantly smaller influence on the final properties of the materials, provided that they did not exceed certain classic limits (3-5 °C/min for the heating rate, 0.5-1 h for the duration of heat treatment). As expected, the choice of carbon raw material also played an important role, with cellulose-based materials such as cigarette filters and peanut shells giving the best results. The final activated carbon materials exhibit greatly enhanced sorption capacity and new properties such as hydrophilicity, while retaining the typical advantages of activated carbons such as biocompatibility, low cost, ease of production, chemical and relative thermal stability, etc. Thus, in the context of the doctoral thesis, in addition to basic research on synthesis parameters, applied research was also carried out. The materials were initially tested for their hydrogen storage capacity. Despite their mesoporous nature, they exhibited very high hydrogen storage capacity reaching 11.3 wt.% for total gravimetric capacity at 77 K and 100 bar and 6.2 wt.% for excess uptake at 77 K and 40 bar. At the same time, under realistic system operating conditions with pressure and temperature cycling from 100 bar and 77 K to 5 bar and 160 K, both the gravimetric, 10.6 wt.%, and the volumetric deliverable hydrogen, 44.9 g L⁻¹, exceed the targets set by the US Department of Energy for 2025. At the same time, the materials were used to bind organic pollutants from water, specifically a common cationic dye (methylene blue). Demonstrating fast kinetics and following a pseudo-second-order kinetic model, the dye retention by the materials reached record values for the international literature even above 2.5 g/g with more than 85% of the dye adsorption taking place in just 15 minutes. In addition, the materials were also used for other pollutants, achieving complete removal of Cr(VI) traces (≤ 1 ppm) from aqueous solutions and an excellent overall H2S binding capacity: 64.1 mgH2S/gads.. In another application, by exploiting the hierarchical structure of the materials and the high specific surface area, the creation of high-performance supercapacitor electrodes was studied. The electrodes exhibited very good specific capacitances of the order of 221 F/g for a current density of 0.5 A/g and 200 F/g for a current density of 2.0 A/g, with excellent stability and retention of 87.5% of the specific capacitance after 10000 cycles, as well as an energy density of 4.3 Wh/kg for a maximum power density of 2500 W/kg. Finally, as it was observed that during the degassing of the samples to determine their specific surface area by porosimetry measurements, they lost a very significant percentage of their initial mass, moisture binding studies were performed. Activation with a very high KOH/carbon mass ratio led to the conversion of the typically hydrophobic carbons into hydrophilic ones. As a result, the materials demonstrated amazing moisture binding capacities of ~2.5 gH2O/gAC. The above results are encouraging for the use of the materials in a variety of applications as well as for the further study of them or the development of new modified materials.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dimitrakou, Aikaterini
- Δημητράκου, Αικατερίνη
Subjects
dc:subject × 16- Ενεργός άνθρακας
- Ιεραρχημένος πορώδης άνθρακας
- Απόβλητα και βιομάζα
- Υπερυψηλή ειδική επιφάνεια
- Ενεργειακές εφαρμογές
- Περιβαλλοντικές εφαρμογές
- Activated carbon
- Hierarchical porous carbon
- Waste and biomass
- Ultra-high surface area
- Energy applications
- Environmental applications
- Άλλες Φυσικές Επιστήμες
- Φυσικές Επιστήμες
- Other Natural Sciences
- Natural Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/60959