National Technical University of Athens (NTUA)
Experimental study on the effects of building envelope vegetation on air exchange, external flow and surface pressure
Abstract
dc:descriptionUrban vegetation, including grasslands, green roofs, green walls, and street trees, is increasingly used as an eco-sustainable design strategy to mitigate urban heat island (UHI), improve air quality, and reduce building energy consumption. Vegetation mechanisms include transpiration, radiation trapping, shading, pollutant deposition, and aerodynamic effects. These mechanisms are interrelated, influencing thermal conditions, air quality, and air ventilation efficiency. In recent years, urban planners and architects have shown growing interest in adopting green walls and green roofs in building infrastructure as a passive measure for both summer and winter. Green coverage can reduce surface and outdoor air temperatures through shading and transpiration or act as thermal insulation, reducing heat loss from buildings. However, the implanted vegetation can also alter wind flow conditions around the building, affecting the natural ventilation potential of the building geometry and, consequently, the well-being of its residents and employees. The most crucial factors in the aerodynamic impact of urban vegetation are its position, properties, and geometric characteristics, but it remains an open question how urban green infrastructure affects the indoor air quality of a building. The thesis aims to establish an experimental dataset to assess the impact of implanted vegetation on indoor air exchange in a real building within an urban environment. The goal is to better understand how the position and properties of urban vegetation affect the indoor air quality of an isolated building under adverse environmental conditions such as apnoea, and to eventually extend this knowledge into guidelines for effective mitigation strategies for any urban vegetation configuration. To reach the final conclusions and findings, various reduced-scale wind tunnel measurements were conducted as part of the experimental approaches. The suburban/urban environmental conditions are represented in the wind tunnel by simulating atmospheric boundary layers (ABL) through the appropriate installation of spires, roughness elements, and trip (passive methods) on the wind tunnel floor. The vegetation was modeled in reduced-scale studies using artificial materials such as porous foam. Measurement and calculation of six key factors were performed : i) the pressure loss coefficients, λ; ii) the similarity law between the model and full-scale; iii) the leaf area density (LAD); iv) the porosity measurements, ε; v) the thickness, T and vi) the product of pressure loss coefficients with thickness, λ·T. Comparison with natural vegetation data confirmed the successful simulation of vegetation at model scale. Additional measurements of the drag coefficient of natural trees in the wind tunnel, combined with their leaf area density calculations, enabled estimation of the pressure loss coefficients for natural trees and comparison with those for porous foams. This comparative study demonstrates the distinction in flow regime behavior and establishes a threshold based on the permeability values of the vegetation. Moreover, both environmental conditions and vegetation were included in reduced-scale wind tunnel experiments featuring a model building. In particular, an unsheltered cubic building with two openings on its side walls, fully covered either by vegetation on its windward façade or on the rooftop was investigated, in two different atmospheric boundary layer wind tunnels, at the Karlsruhe Institute of Technology (KIT) and the National Technical University of Athens (NTUA). At KIT, pressure (static pressure taps) and velocity (2D point-wise laser doppler velocimetry, LDV) measurements were taken around and at the building openings, along with tracer gas concentration measurements inside the building. At NTUA, velocity measurements were performed using particle image velocimetry (2D Mono PIV and 3D Stereo PIV) at the same measurement locations as at KIT. The scope was to achieve a deeper understanding of the effect of vegetation (position and properties) on the outer flow (pressure and velocity fields) and how this impact is related to the indoor air quality of a full-scale building. The thesis also includes a comparative study of a common experimental setup to assess experimental measurement techniques (LDV, PIV) and facilities (KIT, NTUA).
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pappa, Vasiliki
- Παππά, Βασιλική
Subjects
dc:subject × 23- Πειράματα αεροσήραγγας
- Κάθετη βλάστηση
- Βλάστηση οροφής
- Laser doppler velocimetry (LDV)
- Particle image velocimetry
- Tracer gas concentration measurements
- Μετρήσεις στατικής πίεσης
- Πειράματα υπό κλίμακα
- Μοντελοποίηση ΑΟΣ
- Ρυθμός εναλλαγής αέρα
- Wind tunnel experiments
- Façade greening
- Rooftop greening
- Pressure measurements
- Scaled experiments
- Atmospheric Boundary Layer (ABL)
- Air exchnage rate
- Περιβαλλοντική Μηχανική
- Επιστήμες Μηχανικού και Τεχνολογία
- Πράσινη και Αειφόρα επιστήμη και Τεχνολογία
- Environmental Engineering
- Engineering and Technology
- Green and Sustainable Science and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/61102