Back to search

University of Ioannina

Παρασκευή αργιλοπυριτικών και μαγνησιακών πυρίμαχων υλικών (μαζών και τούβλων) με νανοπρόσθετα και μελέτη ιδιοτήτων

Abstract

dc:description

The subject of this PhD thesis is the synthesis and study of advanced aluminosilicate and magnesia-based refractories with the addition of nano-additives, as well as industrial testing of aluminosilicate refractories under real conditions. These materials are used in industries, specifically in high-temperature processes, and are part of specially designed units and parts such as electric arc furnaces, refractory linings of aluminum melting units, and rotary or static alumina calcination kilns. For many years, the industry of refractories was hesitant to test new raw materials and products, relying on empirical knowledge rather than scientific data. Today, there is continuous research aimed at developing refractory materials with improved properties (physical, mechanical, chemical), increased performance, and longer lifetime. A significant chapter of this research opened with the field of nanotechnology, as it became known that nanomaterials, due to their small size and high specific surface area, can cause significant changes in the materials, enhancing their microstructure and imparting unique properties. In the framework of the PhD thesis, nanoparticles of aluminum oxide (Al2O3), silicon oxide (SiO2), and barium sulfate (BaSO4) were synthesized using conventional methods. Additionally, titanium oxide (TiO2) and silicon carbide (SiC) nanoparticles were synthesized using microwave methods. The syntheses were successful, as confirmed by the characterization of the particles. Nanometer-scale particles were developed but the phenomenon of agglomeration was frequently observed, a problem that often exists during the synthesis of nanoparticles and is addressed by using dispersants and simultaneously breaking up the agglomerates (via ultrasonication) in colloidal suspensions or by using dry ball milling to create nanoscale powders.Furthermore, magnesia-carbon refractories were synthesized at the laboratory using industrial raw materials. The first goal of this study was to understand the role of graphite percentage in the properties of the refractories. It was observed that samples with 6% graphite (compared to those with 10%) showed a slight increase in density by 1,5% with a corresponding decrease in porosity by 8,2%. This minimal improvement did not significantly affect the compressive strength of the samples, although the flexural strength appeared to improve. The second goal of the study was to investigate the effect of nanopowders addition to the magnesia-carbon refractories. Specifically, aluminum oxide and titanium oxide nanoparticles were added to the raw materials, after milling them in a planetary mill along with the graphite for better dispersion within the ceramic structure. The maximum density of the samples was observed at 50% TiO2-50% Al2O3 ratio, although this did not exceed the density of the samples without nanoparticles, contrary to expectations. Enhanced mechanical strength is observed compared to specimens without nano-additives, particularly for compositions with high alumina nanoparticle loadings. The study of oxidation resistance was done by keeping the samples at 1500˚C for 30 minutes and determining from the cross section of the samples the dimensions of the non-oxidized area. It was observed that graphite in high percentages reduce the extent of oxidation and leads to a low oxidation rate. Regarding the addition of nanoparticles, the samples with 50% TiO2-50% Al2O3 and 75% TiO2-25% Al2O3 have the lowest oxidation rates, with values under 60%. In addition, corrosion was studied using a synthetic corrosive medium, as well as oxidation, using X-ray computed tomography. Moreover, aluminosilicate refractories with nano-additives were synthesized on an industrial scale and studied. Specifically, mullite refractory masses with the addition of silicon carbide, refractory bricks based on andalusite with the addition of silicon carbide nanoparticles and bauxite refractory masses with the addition of barium sulfate nanoparticles were studied. In this case, was emphasized on understanding the corrosion mechanism, particularly the new phases formed during the reaction of various corrosive agents with the aluminosilicate structure. During corrosion with potassium carbonate of mullite refractory masses with 30% wt. silicon carbide is observed the peeling of vitrified corrosive while a large crack has been created in its main part. The andalusite refractory bricks with 10% silicon carbide addition showed significant corrosion resistance, although replacing some of this percentage with nanoparticles did not result in important improvements. Similarly, the addition of 1% of barium sulfate nanoparticles to the bauxite refractory masses increased the thixotropy, provided high plasticity, and complicated their industrial application. When the percentage of nanoparticles was reduced to 0,5%, it could be studied for industrial-scale compositions and exhibited the required resistance to penetration by molten metal and/or aluminum alloys.

Degree

thesis:*
Grantor dc:publisher
University of Ioannina
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Gkiouzel, Sevasteia-Maria
  • Γκιουζέλ, Σεβαστεία-Μαρία

Subjects

dc:subject × 21

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/61284

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Gkiouzel, Sevasteia-Maria; Γκιουζέλ, Σεβαστεία-Μαρία. Παρασκευή αργιλοπυριτικών και μαγνησιακών πυρίμαχων υλικών (μαζών και τούβλων) με νανοπρόσθετα και μελέτη ιδιοτήτων. University of Ioannina, 2026. http://hdl.handle.net/10442/hedi/61284