University of West Attica
Εφαρμογή τεχνολογίας εμποδίων για το σχεδιασμό και την παρασκευή προϊόντων μανιταριών με βελτιωμένα ποιοτικά χαρακτηριστικά και αυξημένη διατηρησιμότητα
Abstract
dc:descriptionMushrooms represent a significant component of the human diet, due to their distinctive flavour and high nutritional value. They provide proteins of high biological value, as well as vitamins and minerals. However, these products are highly perishable. Indeed, only 45% of global production is consumed fresh, whereas the remaining 55% undergoes processing (e.g. drying, freezing, or canning) to extend shelf life. The limited shelf life of mushrooms is primarily attributed to three factors: 1) their high moisture content (approximately 93%), 2) the absence of a protective epidermal layer, and 3) their high respiration rate. Consequently, the development of innovative processing and preservation techniques for mushrooms is essential. In recent years, within the food industry, consumers’ increasing interest in safe and minimally processed foods has promoted the adoption of hurdle technology. In this approach, mild processing and preservation methods are applied in a synergistic manner, achieving the desired level of stability while minimally affecting product quality and sensory attributes. The present study focuses on the investigation of this approach in two mushroom species (Agaricus bisporus and Pleurotus ostreatus) as well as in by-products derived from Pleurotus ostreatus, with the aim of (i) performing kinetic studies of dehydration techniques, (ii) utilize by-products from the food industry, and (iii) producing high-quality products with extended shelf life. Osmotic dehydration (OD) was selected as the main hurdle. OD is defined as the process of partial water removal by immersing the food material in a hypertonic solution. During immersion, two main mass-transfer phenomena occur: water diffusion from the food to the hypertonic solution and solute uptake from the osmotic medium into the food matrix. Key process parameters include temperature, osmotic solution concentration, and immersion time. As OD constituted the fundamental hurdle of the experimental design, kinetic study and optimisation of the osmotic process were conducted with reference to the aforementioned parameters. This technique was also combined with additional hurdles, including immersion in a citric acid solution, freezing, hot-air drying and ultrasound application, aiming to produce final products with different properties and intended uses. More specifically, at the first part of the research, Response Surface Methodology (RSM) combined with a Box–Behnken experimental design was applied to white mushroom samples to optimize osmotic dehydration. The objective was to investigate the effect of key process parameters on sample quality and to evaluate OD as a pre-treatment prior to freezing. Before OD, an additional short and mild treatment was implemented, in which mushrooms were immersed in a 0,2% citric acid solution in order to reduce enzymatic browning. The factors examined were glycerol concentration (30–50%), temperature (30–50 °C) and osmotic time (0–180 min). For each response (including mass-transfer parameters and selected quality indices) a second-order polynomial model was developed, and all investigated process factors were found to have a statistically significant effect. Based on the desirability criteria, the optimum osmotic conditions were identified as 50 °C for 120 min using 42% glycerol. Validation experiments under these optimal conditions confirmed the adequacy of the model through comparison of predicted and experimental values of the dependent variables. Moreover, osmotically pre-treated samples, after freezing, retained their structure and colour to a greater extent following thawing, compared with untreated samples, with drip loss showing the most pronounced improvement. Control samples exhibited drip loss values of 27,20% on the 8th day and 46,74% on the 167th day of frozen storage, whereas samples previously subjected to OD ranged from 11,32% to 20,56% at the corresponding time points. In the second part of the study, the effect of glycerol concentration (30–50%), temperature (30–50 °C) and immersion time (20–190 min) on mass transfer phenomena (water loss, solid gain, water activity, moisture and salt content) and on key quality attributes, such as colour and texture, were investigated in Pleurotus ostreatus samples. Experiments were conducted using a three-factor, three-level Box–Behnken design, and the measured responses were described by second-order equations in accordance with RSM principles. Based on desirability functions, the optimal conditions were determined as 38,7 °C, 30% glycerol, and 130 min immersion time. These conditions were verified via an independent experiment. After that, samples were enriched with by-products from the distillation of Rosa damascena, aiming to further enhance the antioxidant properties of the final mushroom products (producing a functional food). It was observed that OD enhances the incorporation of phenolic compounds into mushroom samples, with a mean phenolic concentration reaching 8 mg GAE/g sample during osmosis. Subsequently, samples osmotically treated under optimal conditions were divided into two groups: one group was stored under frozen conditions for further study (intended end use: frozen mushrooms), while the other group underwent further dehydration by hot air drying (intended end use: dehydrated mushrooms). The frozen samples that had undergone OD, as well as those subjected to OD and enriched with phenolic compounds (ODR), exhibited significantly improved colour and texture retention and reduced drip loss after thawing, compared with untreated samples. Drip loss was almost double in the non-osmosed samples throughout frozen storage (approximately 28,5% in controls versus 16,4% for OD and 16,6% for ODR). Samples intended for further dehydration by hot-air drying were processed at 40, 55, and 70 °C. OD pre-treatment significantly reduced the drying time required to reach a final moisture content of 10% (w.b.), particularly at 70 °C, where the reduction approached 50% (5 h for untreated samples versus 2,5 h for pre-treated samples). Following the drying process, samples that had undergone pretreatment demonstrated reduced water activity levels and enhanced colour preservation (approximately 25–50%). During the kinetic study of hot-air drying, the Lewis model was considered the most appropriate for describing the drying behavior of Pleurotus mushrooms. A notable benefit of this model is its simplicity, which derives from the fact that it incorporates only two parameters, thus facilitating straightforward application. In the third part of the study, the OD process was optimized using RSM for the osmotic dehydration of Pleurotus ostreatus by-products. The examined process variables were the concentration of the hypertonic solution (comprising a mixture of two osmotic agents: 10–30% maltodextrin and 20–40% oligofructose) immersion time (40–80 min), and temperature (30–50 °C). The findings suggested that a four-factor, three-level Box–Behnken experimental design was effectively utilized to evaluate the impact of process parameters and to determine the optimal osmotic dehydration conditions for producing intermediate moisture mushroom products intended for subsequent hot-air drying. Temperature was the main factor affecting mass-transfer phenomena, while the optimal conditions were determined as 38 °C, 40% oligofructose, 19,3% maltodextrin and immersion time 80 min. Furthermore, when OD was used as a pre-treatment prior to conventional drying, osmotic pre-treatment under optimal conditions significantly reduced the required drying time of the by-products compared with conventional drying, particularly at higher drying temperatures. Consequently, the required energy consumption was also reduced by at least 40% at 50 °C. In the fourth and final part of the research, the combined use of osmosis with ultrasound was investigated as a novel hurdle, aiming to compare it with conventional OD and to assess the potential enrichment of white mushroom samples with magnesium ions (target: development of an intermediate-moisture functional product with enhanced magnesium content). Ultrasound application resulted in faster water loss and a greater reduction in water activity compared with samples processed without ultrasound. Ultrasound-assisted osmosis was optimized using RSM. The factors examined were ultrasound power (36–108–180 W), osmotic solution to sample ratio (10/1–15/1–20/1, w/w) and duration (20, 40, 60 min). The process was conducted at 50 °C using an osmotic solution containing 42% glycerol and 5% NaCl, corresponding to the optimal conditions identified in the first part of the doctoral research. Based on desirability functions, the optimal conditions were determined as 180 W ultrasound power, an osmotic solution to sample ratio of 10/1 and 60 min immersion time. Subsequently, samples were treated under the optimal conditions and MgCl₂ was added to the osmotic solution at four concentrations (0,5–1–2–3%). During magnesium enrichment, significantly higher magnesium uptake was observed in samples subjected to conventional OD across all concentrations tested. Nevertheless, the magnesium amount required to support the nutrition claim (56,25 mg magnesium per 100 g) was achieved both in ultrasound-treated samples (550 mg Mg²⁺) and in non-ultrasound samples (707 mg Mg²⁺), with the addition of only 0,5% MgCl₂ to the osmotic solution. Overall, the findings of the doctoral research indicate that the application of hurdle technology, with osmotic dehydration as the main hurdle, exerts a positive effect on mushroom processing and preservation. By modifying the composition and/or conditions of the applied hurdles, different final products with improved characteristics can be obtained.
Degree
thesis:*- Grantor dc:publisher
- University of West Attica
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Stavropoulou, Natalia
- Σταυροπούλου, Ναταλία
Subjects
dc:subject × 18- Τεχνολογία εμποδίων
- Ωσμωτική αφυδάτωση
- Μανιτάρια
- Ξήρανση θερμού αέρα
- Υπέρηχοι
- Αξιοποίηση παραπροϊόντων
- Hurdle technology
- Osmotic dehydration
- Mushrooms
- Hot air drying
- Ultrasound
- Utilization of by-products
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη και Τεχνολογία τροφίμων
- Other Engineering and Technologies
- Engineering and Technology
- Food Science and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/61777