Back to search

University of Patras

Design and development of millimeter-wave voltage-controlled oscillators for 5G/6G transceivers

Abstract

dc:description

Global regulations for short-range communication systems enable unlicensed access to several gigahertz of spectrum in the millimeter-wave (mm-wave) domain, particularly around the 30 GHz and 60 GHz frequency bands. These bands are highly attractive for modern wireless applications due to their capability to support high data rates and low latency, making them key enablers for next-generation communication and sensing systems such as 5G, FMCW radar, and WiGig. The 30 GHz range is closely associated with 5G New Radio (NR) FR2, spanning approximately 24–40 GHz, while the 60 GHz band offers up to 9 GHz of available unlicensed bandwidth (57–66 GHz) for short-range, multi-gigabit applications such as IEEE 802.11ad/ay (WiGig) and high-speed wireless connectivity. Recent advances in submicron CMOS technologies have enabled the realization of mm-wave radio-frequency integrated circuits (RFICs) at low cost and with high levels of integration. In this context, this dissertation investigates the analysis and design of voltage-controlled oscillators (VCOs) operating in the 30 GHz and 60 GHz frequency bands, with emphasis on performance optimization and key design trade-offs.At 30 GHz, an inductively coupled LC VCO employing a dual-tapped transformer and independent gate/drain biasing is designed, fabricated, and experimentally validated in a 40-nm CMOS process. The proposed oscillator achieves a 15.9% tuning range (25.47–29.88 GHz), a phase noise of −107.66 dBc/Hz at 1 MHz offset, while consuming 6.3 mW from a 1.1 V supply, resulting in a FoM of −187 dBc/Hz and FoMT of −191.8 dBc/Hz. In addition, a dual-band switchless VCO architecture is proposed, demonstrating a continuous tuning range of 27.23–40.32 GHz (38.75%) across 24 sub-bands, with simulated phase noise better than −98.23 dBc/Hz at 1 MHz offset, output power ranging from −5.2 dBm to −0.2 dBm, and power consumption of 8.1 mW.At 60 GHz, multiple VCO architectures are investigated, including designs based on frequency multiplication techniques as well as a fundamental-frequency VCO. A second-harmonic tail-extraction VCO operates from 52.7–64.98 GHz, achieving phase noise between −102.3 and −96.3 dBc/Hz at 1 MHz offset, with output power from −13 to −9 dBm and power consumption of 21.8 mW. In addition, a dual-core switchless VCO architecture is proposed, demonstrating a tuning range of 50.25–73 GHz (37%), with phase noise between −99.2 and −92.1 dBc/Hz and power consumption below 11.3 mW. Finally, a fundamental 60-GHz inductively-coupled VCO operates from 56.60–65.52 GHz (14%), achieving phase noise between −96.2 and −92.5 dBc/Hz, output power above −7 dBm, and power consumption of 14.1 mW. All circuits are implemented in a 40 nm CMOS technology, achieving compact chip area and low power consumption. The presented designs exhibit competitive and, in several cases, state-of-the-art performance compared to previously reported works, demonstrating the suitability of CMOS technology for cost-efficient and high-performance mm-wave transceivers.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Psycharis, Ioannis-Dimitrios
  • Ψυχάρης, Ιωάννης-Δημήτριος

Subjects

dc:subject × 20

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/61936

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Psycharis, Ioannis-Dimitrios; Ψυχάρης, Ιωάννης-Δημήτριος. Design and development of millimeter-wave voltage-controlled oscillators for 5G/6G transceivers. University of Patras, 2026. http://hdl.handle.net/10442/hedi/61936