Back to search

Institutes outside Greece

Modelling and characterisation of cryogenic coolants in additively manufactured microfluidic cooling channels

Abstract

dc:description

In the present Thesis, computational investigations of microfluidic channel flows for various high-relevance engineering applications are performed. Initially, a numerical framework is implemented to overcome the limitations of the pseudo-compressibility method in strongly viscous, microfluidic channel flows, relying on the high-order treatment of the pressure outflow boundary condition. The employment of the suggested approach resultsin percentage errors of approximately 1%. Conversely, low-order treatment yielded percentage deviations from 73% to 85% for the two-dimensional and over 95% for the three-dimensional, microfluidic channel flows. Furthermore, novel analytical formulations for three-dimensional benchmark flows through a rectangular cross-section, microfluidic channel are derived, and a Reynolds number applicability range is determined for each formulation. For conventional channels, the upper limit for the employment of the Poiseuille flow formulation is Re = 300, for the Couette flow Re = 2300 and for the Couette–Poiseuille flow Re = 290. The upper limits in the case of microfluidic channels are 1150, 2300 and 650, respectively. The superposition of these three-dimensional flows is also demonstrated. Attention was then directed to rough, turbulent, microfluidic channel flows for industrial high-heat flux aerospace applications. Particularly, the numerical characterisation of the cryogenic liquid oxygen coolant in the Additively Manufactured (AM) microfluidic cooling channel of the DemoP1 aerospike engine demonstrator is performed, resulting in percentage deviations below 1% against experimental measurements from the demonstrator hot-fire testing campaign. Additionally, temperature-dependent properties for the GRCop-42 alloy, used for the fabrication of the demonstrator are derived and assessed. Finally, a modified Dittus–Boelter correlation for the characterisation of the heat transfer behavior in the asymmetrically heated, microfluidic channel is introduced. This analysis comprises one of the first attempts to provide a comprehensive view of the cryogenic coolant flow in the dual regenerative cooling system of an aerospike engine.

Degree

thesis:*
Grantor dc:publisher
Institutes outside Greece
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Monokrousos, Nikolaos
  • Μονοκρούσος, Νικόλαος

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/61941

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Monokrousos, Nikolaos; Μονοκρούσος, Νικόλαος. Modelling and characterisation of cryogenic coolants in additively manufactured microfluidic cooling channels. Institutes outside Greece, 2025. http://hdl.handle.net/10442/hedi/61941