National Technical University of Athens (NTUA)
Study and development of micro nano structured photonic surfaces with alternative nanomanufacturing techniques
Abstract
dc:descriptionMicro- and nano-engineering of materials and surfaces is a crucial aspect of light manipulation and, therefore, of the development of photonic devices and/or components. Advances in micro/nanofabrication have opened paths for controlling optical properties, yet cost and scalability often remain a challenge. Since the mid-1990s, when nanoimprint lithography (NIL) was discovered1 and proposed as an alternative nanomanufacturing technique that uses polymers to replicate micro- and nanostructures at high resolution, the technique has developed and proven its high-throughput capabilities to pattern over large areas on a meter-to-meter basis (roll-to-roll), integrating with hybrid and functional materials. This thesis investigates NIL as a route to surfaces with tailored optical properties across the UV–visible and infrared spectrum. In the first part of this thesis, nanopatterning is combined with metal evaporation to fabricate plasmonic structures for plasmonic coloring and refractive-index sensing applications. Color tuning has been systematically studied via controlling the nanostructures critical dimensions. A large area (5 cm × 5 cm) was aditionally favricated and demonstrated a strong iridescent blue color. The fabricated plasmonic surfaces have been further studied for post-customization by tuning the effective refractive index, and were evaluated as refractive-index sensors using glycerol solutions, reaching a sensitivity of ~570 nm/RIU. In chapter 5, surface micro structuring is studied for enhanced infrared emission for radiative cooling applications. A visibly transparent, UV-curable organic–inorganic hybrid resist is characterized for its emission properties within the atmospheric window, before and after imprinting with four different microstructure geometries. Their spectral characteristics across the visible–NIR (400–900 nm) and infrared (7–14 μm) ranges identify one micropillar array and the micro pyramidal array as the most promising, while the selected micropillar array was further evaluated through cooling-power calculations and outdoor temperature measurements exhibiting average temperature drops of 3℃ compared to bare Si. The same geometry was selected to create a hierarchical topography which introduced a second functionality. The bi-functional film apart from its radiative cooling properties had an antireflection effect which improved transparency. Exploratory work on developing hybrid passive radiative-cooling materials is also presented and demonstrated. Initially, a non-toxic, biobased cooler material based on a PLA/SiO₂ nanocomposite was developed and realized. Moreover, the fabrication of a multilayer polymeric Bragg reflectors design was developed and tested for its photonic cooling properties. In summary, this work validates NIL as a versatile and scalable manufacturing method for functional optical surfaces, spanning plasmonic color and sensing to structurally enhanced radiative cooling.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Dimogerontaki, Nefeli
- Δημογεροντάκη, Νεφέλη
Subjects
dc:subject × 16- Πλασμονικά χρώματα
- Πλασμονικοί αισθητήρες δείκτη διάθλασης
- Παθητική ψυξη μεσω ακτινοβολίας
- Μικρο νανο δομές
- Νανοεκτυπωτική Λιθογραφία
- Plasmonic colors
- Plasmonic refractive index sensing
- Passive radiative cooling
- Nanoimprint Lithography
- Micro-nano structures
- Φυσική
- Φυσικές Επιστήμες
- Οπτική
- Physical Sciences
- Natural Sciences
- Optics
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/62418