Back to search

Institutes outside Greece

Analytical and numerical solutions of viscoplastic flows with wall slip

Abstract

dc:description

Viscoplastic flows, i.e., flows of yield-stress materials are encountered in many processes of industrial interest. These materials include food products, drilling fluids, cosmetics products, pastes, biological and geophysical fluids. Ideal viscoplastic materials behave as rigid (inelastic) solids whenthe applied stress is below a threshold value, the yield-stress, and as fluids above this critical value. Viscoplastic materials are also known to exhibit wall slip, usually when the wall shear stress surpasses a second critical value, referred to as the slip yield-stress. A consequence of these critical stresses is the appearance of different flow regimes in viscoplastic flows in the presence of wall slip, in which the material may be unyielded or yielded and may stick or slip at a wall. The main objective of this thesis is to provide analytical, semi-analytical, perturbation and numerical solutions for basic Newtonian and viscoplastic flows with and without wall slip, such as Poiseuille flows in channels, pipes and annular tubes, and the torsional parallel plate flow.We first derive semi-analytical solutions of the annular Poiseuille and torsional parallel plate flows of Bingham and Herschel-Bulkley fluids, respectively, in the presence of wall slip. When different Navier-slip laws (zero slip yield-stress) are employed at the two walls in the annularPoiseuille case, three flow regimes are identified: a sliding (no yielding) regime below a critical pressure gradient, followed by an intermediate semi-sliding (partially yielded) regime up to a second critical value, above which the material is fully yielded. When slip yield-stress is non-zero, a no-flowregime is observed below a critical pressure gradient, succeeded by sliding and yielding regimes. The critical pressure gradient values defining these flow regimes are determined, and closed-form solutions for the velocity and the shear stress are provided for all cases. The various flow regimesappearing in the case of torsional parallel flow of Herschel-Bulkley fluids with wall slip with nonzero slip yield-stress are then identified and investigated. When the rim shear stress, is below the slip yield-stress, the exerted torque is not sufficient to rotate the disk. When rim shear stress is greater than the slip yield stress but below the yiled stress of the fluid, the material is still unyielded but exhibits wall slip and rotates as a solid at half the angular velocity of the rotating disk. Finally, when the rim shear stress is greater than the yield stress of the fluid, the material exhibits slip everywhere and yields only in the annulus ry <= r <= R, where ry is the critical radius at which the shear stress is equal to the yield-stress and R is the radius of the disk. The computed apparent flow curves reproduce the patterns observed in experiments on certain colloidal suspensions. Thus, the obtained solutions can be used for the rheological characterization of these materials and the determination of the slip parameters.The effects of the pressure-dependence of wall slip in annular Poiseuille flow are studied next considering a Newtonian fluid and a slip equation with pressure-dependent coefficients. An approximate solution is derived up to second order by using a regular perturbation method schemein terms of the small dimensionless pressure-dependent slip parameter. An explicit formula for the average pressure drop required to sustain a constant volumetric flow rate is also obtained and post-processed by using a convergence acceleration technique to enhance the accuracy of the original perturbation series. All phenomena associated with pressure-dependent wall slip are amplified as the radius ratio is increased.The second part of the thesis is devoted to the investigation of the flow development of Bingham and Newtonian fluids, first in channels and pipes without wall slip, and then in annular tubes with and without wall slip. We utilize the Papanastasiou-regularized Bingham model and finite element simulations to systematically obtain results for wide ranges of Reynolds, Bingham and slip numbers. The numerical simulations are carried out by means of the open-source finite element software FEniCS while a homemade code is also employed for comparison and validation reasons. We explore alternative definitions of the development length including a definition based on wall shear stress. In the case of channels and pipes, we evaluate alternative Reynolds number definitions to unify the development length curves into a single master curve, independent of the Bingham number. The effects of all dimensionless parameters on the development length are investigated. Furthermore, we analyze the distribution of yielded and unyielded regions within the flow domain and investigate the influence of the regularization parameter in accurately determining these regions.

Degree

thesis:*
Grantor dc:publisher
Institutes outside Greece
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Gryparis, Evgenios
  • Γρυπάρης, Ευγένιος

Subjects

dc:subject × 22

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/62520

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Gryparis, Evgenios; Γρυπάρης, Ευγένιος. Analytical and numerical solutions of viscoplastic flows with wall slip. Institutes outside Greece, 2024. http://hdl.handle.net/10442/hedi/62520