Technical University of Crete (TUC)
Charge-based compact modeling of double gate JFETs and MESFETs
Abstract
dc:descriptionAccurate circuit simulation of junction field-effect transistors requires a compact model that consistently describes device electrostatics, drain current, terminal charges, intrinsic capacitances, noise, parameter dependence, and circuit-level operation. Existing JFET models commonly address subsets of these requirements through separate regional expressions or empirical transitions. To the author’s knowledge, no previous JFET compact-modeling work has connected this complete physical and computational chain through a single state variable within one continuous and charge-conserving formulation. The central innovation of this thesis is the development of such a unified framework, using mobile channel charge as the common physical variable linking electrostatics, current, charge, capacitance, noise, parameter extraction, compact-model implementation, and circuit simulation.The framework is first developed for symmetric double-gate junction field-effect transistors (DG JFETs) and related MESFET structures. Starting from the semiconductor electrostatics, a continuous charge–voltage relation is derived and used to formulate the drain current and transconductances in terms of the source- and drain-end mobile charges. The formulation includes drift and diffusion and covers operation from sub-threshold to above threshold and from the linear region to saturation without empirical interpolation between operating regions. The same mobile-charge variable is used with Ward–Dutton partitioning to derive analytical terminal charges and the complete intrinsic-capacitance matrix. Factorization of the terminal-charge expressions produces continuous closed-form charge and capacitance relations at zero drain bias, VDS= 0V, without additional smoothing. A normalization scheme is introduced to obtain compact and physically interpretable expressions for current, conductances, terminal charges, intrinsic transcapacitances, and radio-frequency figures of merit. These expressions are assembled into the Charge-based JFET Model (CJM) and implemented in Verilog-A. The CJM incorporates extensions for velocity saturation and channel-length modulation to cover important short-channel effects, together with mobility degradation, series resistance, and parasitic capacitances. The model reproduces TCAD and measured device characteristics. The CJM provides circuit designers with one consistent charge-based model for DC, small-signal, transient, and noise simulation. Its physical parameters allow designers to evaluate how device characteristics, bias conditions, and temperature affect circuit performance. At the circuit level, it reproduces the measured frequency response of a common-source amplifier designed and fabricated in-house, including its approximately 13.5 dB midband gain and its low- and high-frequency cut-off behavior.The charge-based framework is further extended to asymmetric four-terminal DG JFETs with independently biased gates and dissimilar gate contacts. A decomposition into two coupled equivalent symmetric devices provides analytical expressions for the electrostatics, threshold voltage, drain current, terminal charges, and intrinsic-capacitance matrix while preserving charge conservation. Over the investigated bias range, the approximation used for the equivalent channel decomposition produces a maximum normalized discrepancy of 0.478% in the total mobile charge relative to the numerical electrostatic solution. The resulting current, transconductance, charge, capacitance, and threshold-voltage trends show very good agreement with TCAD simulations. Charge-based formulations are also developed for channel thermal noise and Hooge mobility fluctuation low-frequency noise. They are evaluated using TCAD simulations and measurements obtained with a dedicated low-noise characterization setup designed and implemented in-house. For the measured commercial JFET, the extracted Hooge parameter is 5e-8, and the mobility fluctuation formulation reproduces the measured bias dependence. Physics-based methods are additionally developed for extracting effective carrier mobility, series resistance, and threshold voltage from device characteristics.The framework is evaluated across n- and p-type devices, symmetric and asymmetric DG JFETs, DG and tri-gate MESFETs, silicon, SiC, and GaN technologies, different device geometries and bias conditions, and temperatures up to 500 ∘C. Its dissemination through the JFETlab online simulation tool on nanoHUB further enables application of the framework to device analysis. Together, the analytical developments, Verilog-A implementation, TCAD comparisons, device measurements, and amplifier experiment establish, to the author’s knowledge, the first unified charge-based compact modeling framework for JFETs extending from semiconductor electrostatics to circuit simulation. The work resulted in four journal articles and three conference papers, including the Best Paper Award at ESSDERC 2018.
Degree
thesis:*- Grantor dc:publisher
- Technical University of Crete (TUC)
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Makris, Nikolaos
- Μακρής, Νικόλαος
Subjects
dc:subject × 27- Συμπαγής μοντελοποίηση
- JFET διπλής πύλης
- Μοντελοποίηση βασισμένη στο φορτίο
- Φορτίο και χωρητικότητα ακροδεκτών
- Ασύμμετρο JFET
- Μοντελοποίηση θορύβου
- Εξαγωγή παραμέτρων
- Τρανζίστορ επίδρασης πεδίου επαφής μετάλλου-ημιαγωγού
- Compact modeling
- Double-gate JFET
- Charge-based modeling
- Verilog-A
- Terminal charge and capacitance
- Asymmetric JFET
- Noise modeling
- Parameter extraction
- MESFET
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Νανοτεχνολογία
- Νανοεπιστήμη και Νανοτεχνολογία
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
- Nano-Technology
- Nanoscience and Nanotechnology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/62575