National Technical University of Athens (NTUA)
Hydrodynamic design & array optimization of wave energy devices in variable bathymetry regions
Abstract
dc:descriptionThe dissertation addresses the hydrodynamic design and array optimization of Wave Energy Converters (WECs) in coastal environments characterized by variable bathymetry. As wave energy emerges as a promising renewable resource due to its high energy density and predictability, efficient methods for its harnessing, particularly in nearshore regions, remain a critical challenge. These challenges are due in part to the complex wave-structure-seabed interactions that occur in shallow and irregular underwater topographies, which are often oversimplified in existing models. A brief review of wave energy technologies and an attempt for their categorization is initially presented in this dissertation. For the solid part of this work, step-approach has been followed starting with single device with one degree of freedom over a flat seafloor and will conclude with WEC-array attached to a breakwater, over variable bathymetry while response in the time domain is also investigated with the aim of applying real-time latching control. The performance of the generally-shaped axisymmetric devices in areas with bottom profile variation, common in coastal and nearshore environments, is examined by means of a Boundary Element Method, capable of treating hydrodynamic interaction between multiple floating bodies and general bathymetry. The mild-slope assumptions-free methodology is based on a novel Boundary Element Method, combined with the Coupled Mode System and Perfectly Matched Layer model, for the treatment of the propagation/diffraction/radiation problems and, following its validation in 2D and 3D problems. Among outcomes is that a varying seafloor may even present constructive effects on a device’s performance. Optimization is performed with following leading axes: device design, device operational degrees of freedom, computational-cost minimization, area of deployment for the device and device control. Shape and PTO optimization are carried through for heave power mode and one additional degree of freedom, this of pitch mode of oscillation. It is demonstrated that consideration of heaving floater over a region of general bottom topography in combination with pitch oscillation modes leads to increased levels of the WEC performance. The thesis also investigates WEC arrays, considering both open-water configurations and installations adjacent to breakwaters. Simulation results reveal that array performance is highly dependent on spacing, wave incidence, and bottom slope, with the interaction factor (q) varying. WEC arrays attached to the exposed side of a harbor breakwater, are evaluated, considering reflective effects, and hydrodynamic interactions between the multiple floating devices. A case study is presented for a site in the South Aegean Sea, characterized by relatively increased wave energy potential, using long-term climatological data, while also a comparison with surge-type WEC (Oscillating Wave Surge Converter) model is performed. Using the 3D BEM approach is, however, accompanied by high computational cost. A simplified model based on the Modified Mild-Slope Equation (MMSE) with inclusions is presented for approximating the scattering of waves from multiple point absorbers arranged in an array over general bottom topography. Based on an analytical solution for the wave scattering/dissipation problem by circular inclusions, the absorbing coefficient of the MMSE in the vicinity of the WECs on the horizontal domain is tuned using BEM 3D data and subsequently is used for approximating multiple scattering effects by the array. Application of a control to the otherwise free oscillation of the body can significantly enhance power harnessing efficiency. The prediction of WEC performance in multichromatic incident waves under latching control strategy using a time-domain simulator, with and without memory effects, showcased improvement of performance in particular conditions. Time-domain simulations are conducted using Cummins’ equation, incorporating both memory-less and memory-inclusive formulations. Under realistic multichromatic wave spectrum and now using the time domain expressions, the application of latching control leads to energy capture gains, with memory-inclusive models further improving prediction fidelity. These results highlight the importance of dynamic control strategies for maximizing energy output under time-varying sea states. Numerical results demonstrate that including also fluid memory significantly enhances the predicted results. Finally, an attempt to highlight possible environmental impacts from the deployment of such devices in coasts and local ecosystems seals subject research, while proposals for future work are here to inspire a deeper dive by future research activities. In conclusion, the thesis provides a validated, scalable, and versatile numerical approach for the analysis and design of wave energy systems in realistic nearshore settings.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2025
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bonovas, Markos
- Μπονόβας, Μάρκος
Subjects
dc:subject × 37- Μέθοδος συνοριακών στοιχείων
- Κυματοθραύστες
- Συζευγμένο σύστημα
- Βελτιστοποίηση σχεδιασμού
- Πεδίο συχνοτήτων
- Υδροδυναμική
- Μοντέλα Μνήμης
- Πολλαπλοί βαθμοί ελευθερίας
- Σημειακός απορροφητής
- Πεδίο χρόνου
- Επιδράσεις μεταβλητού βάθους
- Συστοιχίες συσκευών κυματικής ενέργειας
- Κυματική ενέργεια
- Τεχνικές ελέγχου
- Τεχνική στρώματος απορρόφησης
- Boundary element method
- Breakwater
- Coupled Mode System
- Design optimization
- Frequency-domain
- Hydrodynamics
- Latching
- Memory models
- Multi-DOF
- Perfectly Matched Layer
- Point absorber
- Time-domain
- Variable depth effects
- WEC Arrays
- Wave energy
- Perfectly matched layers
- Περιβαλλοντική Μηχανική
- Επιστήμες Μηχανικού και Τεχνολογία
- Ανανεώσιμη ενέργεια, Αειφορία και Περιβάλλον
- Environmental Engineering
- Engineering and Technology
- Renewable Energy, Sustainability and the Environment
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/62643