Democritus University of Thrace (DUTH)
Ανάπτυξη εξάθυρων – πολύθυρων διατάξεων – δικτύων υπερ-ευρείας ζώνης (UWB) για εφαρμογές Λογισμικά Οριζόμενων Ράδιο – Ραντάρ (SDR)
Abstract
dc:descriptionThe continuously increasing demand for higher data rates, greater capacity, andmore efficient utilization of the available spectrum is driving the development of advanced techniques for modern and future wireless communication systems, including 5G, Beyond-5G, and 6G. Techniques such as three-dimensional beamforming and polarization multiplexing impose increased requirements on broadband and compact RF subsystems. Multiport microwave networks, such as six-port networks and Butler matrices, constitute key building blocks of such subsystems. In this context, the main objective of the present doctoral thesis is the study and development of broadband and compact multiport microwave networks, with particular emphasis on six-port networks and Butler matrices. These networks consist of individual building blocks, such as couplers, power dividers, and phase shifters. Consequently, the overall response of a multiport network is determined both by the performance of its individual building blocks and by their interconnections. A first challenge concerns the broadband and compact implementation of the building blocks themselves. A second challenge is their appropriate interconnection so that the corresponding multiport network maintains the desired response over a wide frequency range. To address this problem, a novel broadband matching technique is proposed, through which appropriate transmission lines for matching and interconnecting different building blocks are determined. At the same time, the implementation of the interconnecting lines using meander lines enables a reduction in the overall footprint of the multiport network. In this way, the proposed technique provides broadband operation and miniaturization, facilitating the integration of multiport networks into RF subsystems, such as the interconnection of horizontal and vertical rows of Butler matrices for the implementation of three-dimensional beamforming (3D beamforming). The proposed technique is applied and experimentally validated through the development of prototype six-port networks and Butler matrices operating in different frequency regions. The six-port networks are developed in the 5G FR1 frequencyrange, where their implementation using meander lines achieves a footprint reduction of approximately 63%, while maintaining broadband operation with a fractional bandwidth of approximately 103%. In addition, the results obtained from the prototypes confirm their capability for efficient reception of digitally modulated signals, including high-order modulation schemes. Correspondingly, in the FR3 frequencyrange, 4×4 and 8×8 Butler matrices are developed, achieving fractional bandwidths of approximately 102% and 92%, respectively, while maintaining the required amplitude and phase relationships for the generation of the corresponding beams. The application of the proposed technique to two different categories of multiport networks establishes it as a unified and flexible design approach for the synthesis of multiport microwave networks. In parallel, this thesis investigates the use of Substrate Integrated Waveguide (SIW) technology for supporting rectangular waveguide modes at millimeter-wave frequencies. Compared with microstrip lines, SIW technology exhibits lower losses and can be implemented using printed circuit board (PCB) technology. In this context,the efficient excitation and guidance of the TE01 mode are investigated, employing a periodic Electromagnetic Band Gap (EBG) structure to reduce radiation losses and suppress undesired modes. Consequently, the capability to support both theTE10 and TE01 modes can be exploited to support different polarizations. The proposed configuration is developed with the prospect of its future integration into beamforming networks, with the aim of combining multiple beams with polarization multiplexing. Overall, the technique proposed in this thesis combines broadband operation, miniaturization, and the achievement of the desired response. The implemented networks are intended to contribute to the development of multifunctional RF subsystems for reception, beamforming, and polarization multiplexing in modern and future wireless communication systems
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Empliouk, Tzichat
- Εμπλιούκ, Τζιχάτ
Subjects
dc:subject × 18- Ευρυζωνική προσαρµογή
- Γραµµή Μαιάνδρου
- Συµπαγές εξάθυρο δίκτυο
- ∆ίκτυο διαµόρφωσης δέσµης
- Κυµατοδηγός ενσωµατωµένος σε υπόστρωµα
- ∆ιέγερση ρυθµού TE01
- Broadband matching
- Meander line
- Compact six-port network
- Beamforming network
- Substrate integrated waveguide
- TE01 mode excitation
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Communication engineering and systems, Telecommunications
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/62648