Institutes outside Greece
Reduction of bauxite and Al-containing waste to produce calcium aluminate slags and iron
Abstract
dc:descriptionThe production of metallurgical grade Al2O3 from bauxite ores is mainly done through the Bayer process. This process is well established and efficient, but it has environmental challenges. The formation of a solid residue, the Bauxite Residue (often called red mud) is the main problem as its valorization is currently poor. On the other hand, diasporic bauxites with high iron content or other alumina resources are not considered proper for the Bayer method. The development of a process that can treat and holistically valorize lower grade materials is essential. The Pedersen process combines pyro- and hydrometallurgical techniques to produce pig iron that can be used further and a calcium aluminate slag for alumina recovery, while it prevents the formation of any hazardous waste. Although research has been conducted to produce calcium aluminate slags mainly through modifications of the Pedersen process little is known about the smelting reduction treatment of the Pedersen process. The purpose of this study is to examine the production of calcium aluminate slags and irons from pre-treated bauxite and other alumina-based materials. When this method was developed, the current environmental challenges were not that important. This study pursues possible options to lower the environmental impact of the smelting by gaseous pre-treatment of the bauxite ore. In this Ph.D. research, diasporic bauxite is pre-calcined (900°C) and reduced by H2 gas, and subsequently smelted at 1650°C with lime in an induction furnace. In this research, mass balance calculations were done for the experimental design and moderate the charge mixtures. FactSage and HSC thermodynamic software were applied to support the design and the obtained results further. Characterization techniques as SEM, XRD, XRF, EMPA/WDS, etc., were used for evaluating the characteristics of the raw materials and obtained products. A Stationary (SR) reactor and the possibility to use a fluidized-bed (FR) reactor are included for the isothermal gas reduction. It was found that the reduction rates are high initially and are gradually decreasing. It was seen that the rates are enhanced with the increase of temperature and H2 concentration in the gas. The increase of temperature will result in more porous iron. It was found that the formation of hercynite (FeAl2O4) at specific temperatures and flow rates occurs, and it will retard the complete reduction of iron oxides. In general, iron is completely reduced and separated from the slags after the smelting of both the reduced and calcined bauxite. At the same time, Si and Ti were detected in the metallic phase but mainly concentrated in the slags. Al2O3-containing phases that are considered leachable were obtained in the slags. The increase in lime addition will enhance the formation of 5CaO.Al2O3, which is an important phase for alumina recovery. A mass ratio m(CaO)/m(Al2O3) of about 1.12 in the slags was beneficial for achieving the target phases. The presence of O2 and/or OH- will alter the 5CaO.Al2O3 to 12CaO.7Al2O3, both compounds are necessary for the Al2O3 recovery. The valorization of bauxite residue with CaO-containing materials was investigated via smelting-reduction in the last part of this study. It was observed that iron was reduced entirely and separated from the slags. S, Ti, and Si are mostly concentrated in the slags. The formation of Al2O3-containing leachable phases was enhanced by slow cooling (~ 10°C/min) and higher lime amounts (m(CaO)/m(Al2O3) ~1.3-1.4). In general, there are possibilities to revise the Pedersen process, while the formation of slags with leachable Al2O3-containing phases were achieved with a control in the slag chemistry and smelting conditions.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lazou, Adamantia
- Λάζου, Αδαμαντία
Subjects
dc:subject × 18- Αναγωγικές αντιδράσεις
- Κράματα σιδήρου
- Αλουμίνιο, Παραγωγή
- Απόβλητα αλουμινίου
- Αξιοποίηση βιομηχανικών αποβλήτων
- Reduction reactions
- Iron alloys
- Aluminium production
- Aluminium byproducts
- Waste Valorization
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Μεταλλουργία και Μεταλλουργική μηχανική
- Μέταλλα και Κράματα
- Materials Engineering
- Engineering and Technology
- Metallurgy and Metallurgical Engineering
- Metals and Alloys
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/62794