Back to search

University of West Attica

Η επίδραση της όπτησης οδοντιατρικής πορσελάνης και της συγκλεισιακής φόρτισης στην αυχενική και εσωτερική εφαρμογή των κατασκευασμένων με τη χρήση της τεχνολογίας CAD/CAM σκελετών Co-Cr επιεμφυτευματικών συγκολλούμενων μεταλλοκεραμικών στεφανών

Abstract

dc:description

In this doctoral dissertation, the effect of porcelain firing cycles on the microstructure, as well as on the marginal and internal fit of Co-Cr frameworks of implant-cemented metal-ceramic crowns manufactured by four different fabrication methods: Casting (C), Hard Milling (HM), Soft Milling (SM), and Selective Laser Melting (SLM) was evaluated. Additionally, the effect of occlusal loading on the marginal and internal fit of Co-Cr frameworks of implant-cemented metal-ceramic crowns was assessed. Six (n=6) Co-Cr specimens were fabricated with each of the four manufacturing methods and divided into two subgroups (n=3): one subgroup with the specimens as fabricated (C1, HM1, SM1, SLM1) and the other subgroup (C2, HM2, SM2, SLM2) with specimens subjected to thermal cycles simulating porcelain firings. The microstructure analysis of the Co-Cr specimens was studied using X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray Spectroscopy (EDX). Ten (n=10) Co-Cr frameworks of implant-cemented metal-ceramic crowns were fabricated with each manufacturing method, categorized into groups (C, HM, SM, SLM) according to their fabrication method, marginal and internal discrepancies were measured using micro-CT. Occlusal loading was applied to the implant-cemented metal-ceramic crowns of all groups, and the marginal and internal fit was evaluated before and after occlusal loading. The results were analyzed by two-way ANOVA and Tukey post hoc test. The results showed the presence of the two allotropic crystalline phases of cobalt, γ-fcc and ε-hcp, in all specimens; after thermal cycles, the percentage of the ε-hcp phase increased, especially in the C and SM groups. Random distribution of small pores or defects was detected in the C and HM groups and in the SLM1 subgroup, while the SM group specimens showed a diffuse distribution of small pores. Carbides were detected in the C, HM, and SLM groups, also carbides and silica in the SM2 subgroup. After porcelain firings, C and SM groups exhibited a statistically significant (p < 0.05) reduction in marginal and internal discrepancies. Before porcelain firing cycles, SLM and SM groups exhibited better marginal fit with a significant difference (p < 0.05) than the other groups, and the SLM group had better internal fit than the other groups demonstrating statistical significance (p < 0.05). After porcelain firings, the SM group exhibited better marginal and internal fit with statistical significance (p < 0.05) than the other groups. Occlusal loading did not affect the marginal and internal fit of the Co-Cr frameworks. The marginal and internal fit of all groups, both before and after porcelain firings, as well as after occlusal loading, was clinically acceptable.

Degree

thesis:*
Grantor dc:publisher
University of West Attica
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Nikolopoulos, Michail
  • Νικολόπουλος, Μιχαήλ

Subjects

dc:subject × 38

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/62876

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Nikolopoulos, Michail; Νικολόπουλος, Μιχαήλ. Η επίδραση της όπτησης οδοντιατρικής πορσελάνης και της συγκλεισιακής φόρτισης στην αυχενική και εσωτερική εφαρμογή των κατασκευασμένων με τη χρήση της τεχνολογίας CAD/CAM σκελετών Co-Cr επιεμφυτευματικών συγκολλούμενων μεταλλοκεραμικών στεφανών. University of West Attica, 2026. http://hdl.handle.net/10442/hedi/62876